[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T42S and T42G Phone stuck at Welcome
Author Message
Pierre06 Offline
Junior Member
**

Posts: 7
Joined: Nov 2021
Reputation: 2
Post: #1
Yealink T42S and T42G Phone stuck at Welcome
Good Morning and Happy new Year !

I've seen there is a similar topic, and decided to make a new one, because i posted from month but get no answer.

In my company we have some 5000 Yealink Phones (T42G, T42S, T49, T19,...), most of the phones are T42S and T42G.
And a non neglectable number of T42S and T42G sometimes remains stuck at Welcome screen.

I've tried to restore factory settings, but not worked, phones still stucked.
What is the procedure to recover the use of these phones ?

I hope i'll get some tips to solve that.
Thanks by advance,

Pierre
01-03-2022 05:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 281
Joined: Jul 2017
Reputation: 13
Post: #2
RE: Yealink T42S and T42G Phone stuck at Welcome
(01-03-2022 05:00 PM)Pierre06 Wrote:  Good Morning and Happy new Year !

I've seen there is a similar topic, and decided to make a new one, because i posted from month but get no answer.

In my company we have some 5000 Yealink Phones (T42G, T42S, T49, T19,...), most of the phones are T42S and T42G.
And a non neglectable number of T42S and T42G sometimes remains stuck at Welcome screen.

I've tried to restore factory settings, but not worked, phones still stucked.
What is the procedure to recover the use of these phones ?

I hope i'll get some tips to solve that.
Thanks by advance,

Pierre

The TFTP recovery procedure is quite straight forward, Google "Yealink TFTP recovery" and check the guide from 888voip (can't post a link, cuz the forum's spam detection might block me.)
01-04-2022 01:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pierre06 Offline
Junior Member
**

Posts: 7
Joined: Nov 2021
Reputation: 2
Post: #3
RE: Yealink T42S and T42G Phone stuck at Welcome
Hello,

Thanks for your answer.
I ve tried with 2 TFTP sofware and get same issue.

After getting the good .rom from Yealink page, we have to rename it in :
T42.rom for T42G
or
T42S.rom for T42S

After with the 2 TFTP software i get the same messages :
'T42S.rom' of type 'octet' is requested from xxx.xxx.xxx.xxx (<- Phone ip address i have setup)
TFTP:3: File too large
'T42S.bin' of type 'octet' is requested from xxx.xxx.xxx.xxx (<- Phone ip address i have setup)
>> 1: File not found (<- i don t have a .bin file so ...)
'T42S.rfs' of type 'octet' is requested from xxx.xxx.xxx.xxx (<- Phone ip address i have setup)
>> 1: File not found (<- i don t have a .bin file so ...)

I ve tried with 2 other T42G with the good firmware, and get the same issue.

Is there a way to get the other files (.bin, .rfs) from the official site ?
(This post was last modified: 01-06-2022 11:17 PM by Pierre06.)
01-06-2022 10:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 281
Joined: Jul 2017
Reputation: 13
Post: #4
RE: Yealink T42S and T42G Phone stuck at Welcome
(01-06-2022 10:54 PM)Pierre06 Wrote:  Hello,

Thanks for your answer.
I ve tried with 2 TFTP sofware and get same issue.

After getting the good .rom from Yealink page, we have to rename it in :
T42.rom for T42G
or
T42S.rom for T42S

After with the 2 TFTP software i get the same messages :
'T42S.rom' of type 'octet' is requested from xxx.xxx.xxx.xxx (<- Phone ip address i have setup)
TFTP:3: File too large
'T42S.bin' of type 'octet' is requested from xxx.xxx.xxx.xxx (<- Phone ip address i have setup)
>> 1: File not found (<- i don t have a .bin file so ...)
'T42S.rfs' of type 'octet' is requested from xxx.xxx.xxx.xxx (<- Phone ip address i have setup)
>> 1: File not found (<- i don t have a .bin file so ...)

I ve tried with 2 other T42G with the good firmware, and get the same issue.

Is there a way to get the other files (.bin, .rfs) from the official site ?

For the T42S.bin File not found and T42S.rfs File not found, I'd bet that in the TFTP root location there is no such files. Perheps you only have there the T42G.rfs and T42G.bin (G not S, that this phone is.)

You can hey the typical recovery files for all the models in the aforementioned guide from 888voip.
01-07-2022 02:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pierre06 Offline
Junior Member
**

Posts: 7
Joined: Nov 2021
Reputation: 2
Post: #5
RE: Yealink T42S and T42G Phone stuck at Welcome
Hello,

Is there a way to obtain these files from official sources/site ?

Thanks,
01-10-2022 04:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pierre06 Offline
Junior Member
**

Posts: 7
Joined: Nov 2021
Reputation: 2
Post: #6
RE: Yealink T42S and T42G Phone stuck at Welcome
Ok i found files on official Yealink site.

For those who searching for :
- make an account on Yealink site
- take the firmware from the support
- on the support page (where you get the firmware), there is a button "Ticket" at the up of the page)
- Select "hardware defects"
- fill the fields
- when u put the MAC adress and select
Fault : Boot Failure
Fault Phenomenon : Stuck...

There is a link under "Test result" that permit to get the recovery files and a pdf with instructions.

So, it s sure you ll get official firmware and files from Yealink.

I hope this will help.

Have a nice day,
01-10-2022 08:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 281
Joined: Jul 2017
Reputation: 13
Post: #7
RE: Yealink T42S and T42G Phone stuck at Welcome
WOW, nice piece of info!

Did you get your phones recovered?
01-10-2022 11:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Pierre06 Offline
Junior Member
**

Posts: 7
Joined: Nov 2021
Reputation: 2
Post: #8
Smile RE: Yealink T42S and T42G Phone stuck at Welcome
Yes, it worked fine Smile
I've tried some T42G and T42S with respective good files, and i ve recovered the phones !

Thanks again for your answers, it give me some clues to the procedure and official files to search, and PumpKIN is good and easy TFTP server !
01-10-2022 11:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S Phone doesn't ring - straight to VM - Need it to ring cobregon 0 214 03-07-2024 03:52 AM
Last Post: cobregon
  Yealink T46U - OpenVPN to MikroTik Router isaiahsiewert 0 438 01-19-2024 12:04 AM
Last Post: isaiahsiewert
Question SMS/Text Auto Reply on T42S tcodispot 0 404 01-09-2024 03:51 AM
Last Post: tcodispot
  T42G - Stuck at Welcome screen Maciejp 1 755 12-22-2023 01:47 AM
Last Post: complex1
  exp43 Stuck on Wellcome Screen nolto 5 4,304 12-15-2023 02:48 PM
Last Post: sles
  Firmware T42s Raimundo 1 1,343 11-23-2023 06:45 PM
Last Post: Darsh
  Connect Yealink T46U to FreePBX system via Synology Site to Site VPN TF2023 0 754 10-10-2023 11:48 PM
Last Post: TF2023
  T46U + EXP43 Stuck on Welcome Screen after update danantonielli 2 3,002 10-06-2023 10:04 PM
Last Post: roland@simplicloud.co.za
  T46s Veriizon as LAN only phone? Desertfabworks 0 695 08-21-2023 11:31 PM
Last Post: Desertfabworks
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,725 07-28-2023 10:27 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication