[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enable/Disable Multicast from programable button
Author Message
bshaske Offline
Junior Member
**

Posts: 1
Joined: Feb 2016
Reputation: 0
Post: #1
Enable/Disable Multicast from programable button
Thanks for any input here,

I have an application where the customer wants to do multicast paging to the phones but also wants to have the availability of users to be able to enable / disable multicast music on their phone. Right now I can subscribe to both the paging stream and the music stream but it has to be done thru provisioning. I am looking for a way to allow each user to be able to log in or out of a multicast stream (in this case music) with a button press on the phone.

Any Ideas?
11-23-2021 11:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
krunkerio Offline
Junior Member
**

Posts: 1
Joined: Jan 2022
Reputation: 0
Post: #2
RE: Enable/Disable Multicast from programable button
Hello. First off, the best setting for multicast rate for your router is usually the lowest amount. Lower Mbps value will typically benefit your normal web uses like browsing or file loading. In this case, You should turn off or disable IGMP Snooping and set the multicast rate to be fixed at the lowest value possible.

krunker

krunkerio
01-19-2022 05:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP50 - Teams Button not working SP3C5 3 2,269 05-10-2022 07:17 PM
Last Post: SP3C5
  WH67 Teams Button does nothing dgelfuso 0 1,050 12-13-2021 11:25 PM
Last Post: dgelfuso
  Beep on multicast john2k 6 8,814 07-06-2021 06:23 AM
Last Post: LG
  Listen to Multicast on T54W and W56H Speaker LG 0 1,591 07-06-2021 06:18 AM
Last Post: LG
  Disable voicemail for line 1 simonbr 0 2,414 11-19-2020 11:19 AM
Last Post: simonbr
  Disable line x while phone is set to DND IT-Risch_Support 3 5,701 08-07-2019 02:00 PM
Last Post: jolouis
  Format of Multicast RTP stream srcurtis 6 18,056 04-19-2019 02:25 AM
Last Post: Helia_Dar
  Yealink T46s Park button mhessels 8 14,432 01-31-2019 02:24 AM
Last Post: BobBluePackets
  CDP enable after factory reset cause the phone can't obtain IP address ccy 4 6,731 11-30-2018 02:34 PM
Last Post: jolouis
  Enable LED indicator when button pressed Dyna-Tech 0 3,512 11-07-2018 11:30 PM
Last Post: Dyna-Tech

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication