[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WH62 high latency audio delay
Author Message
mhoekstratelpa Offline
Junior Member
**

Posts: 2
Joined: Aug 2021
Reputation: 0
Post: #1
WH62 high latency audio delay
Hi,

Since I got my DECT Wireless Headset WH62 (firmware 104.420.0.35), there's a huge audio delay when connected to my Yealink T41S (firmware 66.86.0.15) and computer.

I think it's a delay from the audio sent from the base to the headset. I also tested this by pressing the buttons on the phone. The beeping sound of the button reaches my ears more then half a second later.

Within an active conversation I switch from headset to speaker and in speaker mode there's no noticeable delay, but when I switch back again the delay is very noticeable again.

The delay is so bad, that my conversations are very awkward, because the other side thinks I respond really late.

I have reset the headset (with Yealink USB connect, newest version), I have reset the phone, but nothing get's rid of the delay.

I have filmed a short clip of the problem, but I can't upload it here on the forum.

Does anyone have this problem and does anyone know what I can do about it?
08-20-2021 03:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
telespex Offline
Junior Member
**

Posts: 5
Joined: Feb 2020
Reputation: 0
Post: #2
RE: WH62 high latency audio delay
We have the same problem. It is a very annoying delay. Even dialing a number sounds confusing because of the delay. I hope there is a firmware upgrade to fix this problem.

_J
09-13-2021 01:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
markvdheijden Offline
Junior Member
**

Posts: 33
Joined: Jan 2021
Reputation: 2
Post: #3
RE: WH62 high latency audio delay
(08-20-2021 03:27 PM)mhoekstratelpa Wrote:  Hi,

Since I got my DECT Wireless Headset WH62 (firmware 104.420.0.35), there's a huge audio delay when connected to my Yealink T41S (firmware 66.86.0.15) and computer.

I think it's a delay from the audio sent from the base to the headset. I also tested this by pressing the buttons on the phone. The beeping sound of the button reaches my ears more then half a second later.

Within an active conversation I switch from headset to speaker and in speaker mode there's no noticeable delay, but when I switch back again the delay is very noticeable again.

The delay is so bad, that my conversations are very awkward, because the other side thinks I respond really late.

I have reset the headset (with Yealink USB connect, newest version), I have reset the phone, but nothing get's rid of the delay.

I have filmed a short clip of the problem, but I can't upload it here on the forum.

Does anyone have this problem and does anyone know what I can do about it?

Have you tried to install the latest version for the WH6x and USB Connect wich are released on 30-08-2021?

https://support.yealink.com/en/portal/do...1580dca0a2
09-13-2021 02:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
telespex Offline
Junior Member
**

Posts: 5
Joined: Feb 2020
Reputation: 0
Post: #4
RE: WH62 high latency audio delay
Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J
09-14-2021 01:10 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Dale Erickson Offline
Junior Member
**

Posts: 1
Joined: Oct 2021
Reputation: 0
Post: #5
RE: WH62 high latency audio delay
(09-14-2021 01:10 AM)telespex Wrote:  Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J

We just got a brand new WH62 to plug into our Yealink T57w set at our reception station, just last week.
Same problem as you have described. Our receptionist has stopped useing it and finds it useless.

Hope to find a solution soon Sad very disapointing.
11-24-2021 04:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oxygen Offline
Junior Member
**

Posts: 2
Joined: Feb 2019
Reputation: 0
Post: #6
RE: WH62 high latency audio delay
(11-24-2021 04:19 AM)Dale Erickson Wrote:  
(09-14-2021 01:10 AM)telespex Wrote:  Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J

We just got a brand new WH62 to plug into our Yealink T57w set at our reception station, just last week.
Same problem as you have described. Our receptionist has stopped useing it and finds it useless.

Hope to find a solution soon Sad very disapointing.

Try changing on the handset - features\audio\Ringer device for headset to "use headset and speaker"

This resolved the issue for me
(This post was last modified: 12-01-2021 02:12 AM by Oxygen.)
12-01-2021 01:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
steg Offline
Junior Member
**

Posts: 2
Joined: Feb 2022
Reputation: 0
Post: #7
RE: WH62 high latency audio delay
(12-01-2021 01:46 AM)Oxygen Wrote:  
(11-24-2021 04:19 AM)Dale Erickson Wrote:  
(09-14-2021 01:10 AM)telespex Wrote:  Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J

We just got a brand new WH62 to plug into our Yealink T57w set at our reception station, just last week.
Same problem as you have described. Our receptionist has stopped useing it and finds it useless.

Hope to find a solution soon Sad very disapointing.

Try changing on the handset - features\audio\Ringer device for headset to "use headset and speaker"

This resolved the issue for me

We are having this issue as well.
Checked the setting as mentioned above and it is already that way.
Has anyone had any luck on fixing this issue?
02-26-2022 06:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CarlistRieekan Offline
Junior Member
**

Posts: 4
Joined: Feb 2022
Reputation: 1
Post: #8
RE: WH62 high latency audio delay
(02-26-2022 06:09 AM)steg Wrote:  
(12-01-2021 01:46 AM)Oxygen Wrote:  
(11-24-2021 04:19 AM)Dale Erickson Wrote:  [quote='telespex' pid='71373' dateline='1631553027']
Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J

We just got a brand new WH62 to plug into our Yealink T57w set at our reception station, just last week.
Same problem as you have described. Our receptionist has stopped useing it and finds it useless.

Hope to find a solution soon Sad very disapointing.

Try changing on the handset - features\audio\Ringer device for headset to "use headset and speaker"

This resolved the issue for me

No, in my case the problem is still there.

No update available to fix this.

I even sometimes have a bug where the headphones do not receive or transmit any audio (on 2 different headphones). I have to unplug the power supply from the helmet for a return to function.

The product seems good, but there are still software fixes to be produced for it at Yealink.

Then here Yealink does not seem to want to respond to their client..
03-03-2022 03:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
steg Offline
Junior Member
**

Posts: 2
Joined: Feb 2022
Reputation: 0
Post: #9
RE: WH62 high latency audio delay
(03-03-2022 03:32 AM)CarlistRieekan Wrote:  
(02-26-2022 06:09 AM)steg Wrote:  
(12-01-2021 01:46 AM)Oxygen Wrote:  
(11-24-2021 04:19 AM)Dale Erickson Wrote:  [quote='telespex' pid='71373' dateline='1631553027']
Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J

We just got a brand new WH62 to plug into our Yealink T57w set at our reception station, just last week.
Same problem as you have described. Our receptionist has stopped useing it and finds it useless.

Hope to find a solution soon Sad very disapointing.

Try changing on the handset - features\audio\Ringer device for headset to "use headset and speaker"

This resolved the issue for me

No, in my case the problem is still there.

No update available to fix this.

I even sometimes have a bug where the headphones do not receive or transmit any audio (on 2 different headphones). I have to unplug the power supply from the helmet for a return to function.

The product seems good, but there are still software fixes to be produced for it at Yealink.

Then here Yealink does not seem to want to respond to their client..

I have noticed on a few setups the loss of audio as well. Seems random and can't figure out how to fix. Any help?
06-28-2022 02:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jessiet Offline
Junior Member
**

Posts: 3
Joined: Oct 2022
Reputation: 0
Post: #10
RE: WH62 high latency audio delay
(06-28-2022 02:54 AM)steg Wrote:  
(03-03-2022 03:32 AM)CarlistRieekan Wrote:  
(02-26-2022 06:09 AM)steg Wrote:  
(12-01-2021 01:46 AM)Oxygen Wrote:  
(11-24-2021 04:19 AM)Dale Erickson Wrote:  [quote='telespex' pid='71373' dateline='1631553027']
Yes, I installed Yealink USB Connect and downloaded latest version 104.430.0.15 (8/29/2021). It was installed on the base successfully them was install on the headset. I rebooted the base and verified that I have the latest version.

There is still that annoying delay. But he worst thing is that when you answer a call it takes a few seconds for the caller to hear you. So if you say "hello" the caller doesn't hear that and may assume nobody is there.

_J

We just got a brand new WH62 to plug into our Yealink T57w set at our reception station, just last week.
Same problem as you have described. Our receptionist has stopped useing it and finds it useless.

Hope to find a solution soon Sad very disapointing.

Try changing on the handset - features\audio\Ringer device for headset to "use headset and speaker"

This resolved the issue for me

No, in my case the problem is still there.

No update available to fix this.

I even sometimes have a bug where the headphones do not receive or transmit any audio (on 2 different headphones). I have to unplug the power supply from the helmet for a return to function.

The product seems good, but there are still software fixes to be produced for it at Yealink.

Then here Yealink does not seem to want to respond to their client..

I have noticed on a few setups the loss of audio as well. Seems random and can't figure out how to fix. Any help?

I am seeing the same issues with 30+ of these headsets all on the current firmware. They are very unreliable.
03-17-2023 01:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  WH62 charge longevity ctsmetrony 0 409 12-28-2023 01:09 AM
Last Post: ctsmetrony
  WH66 Microphone delay in MS Teams R0sti 1 1,310 11-29-2023 01:58 PM
Last Post: nassori
  WH62/63 no mute with Teams K__ 1 778 11-20-2023 11:34 PM
Last Post: K__
  WH62 - Huge audio issue - cracking sound kmitgk 3 5,452 08-27-2023 05:23 PM
Last Post: angrygoat
  Headset (WH62) adds a Hard Drive on computers MMR1988 0 1,149 05-26-2023 03:37 PM
Last Post: MMR1988
  WH62 on T54w Phone sync 2nd headset SSPhone 2 2,030 05-09-2023 03:33 PM
Last Post: markvdheijden
  WH62 Failed Update Justin_Whitfield 0 1,346 12-15-2022 10:42 PM
Last Post: Justin_Whitfield
  WH62 Audio Delay dangmoss 5 8,455 11-14-2022 04:57 AM
Last Post: roboco
  WH62 Bad audio after Firmware with T57W astuke 0 1,461 10-12-2022 10:12 PM
Last Post: astuke
Music WH62 Dual headset stereo? obibossard 4 9,197 10-12-2022 01:20 AM
Last Post: Abtzero

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication