[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
static.auto_provision.allsettings
Author Message
alexgrad Offline
Junior Member
**

Posts: 1
Joined: Jul 2021
Reputation: 0
Post: #1
static.auto_provision.allsettings
A few questions.

1. Is it possible to request the device to report the current internal configuration to the provisioning server using SIP NOTIFY request?
Like Cisco SIP NOTIFY message with the Event: report.

2. Is there a configuration parameter for static.auto_provision.allsettings to report ALL settings (now only settings other than default)?
Like Cisco Report Rule.

3. Is there a configuration parameter for static.auto_provision.allsettings to report settings in XML format?

4. Is there a schema for all configuration parameters with a type of parameter, all available values and a default value?
07-20-2021 02:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,181
Joined: Jan 2014
Reputation: 34
Post: #2
RE: static.auto_provision.allsettings
(07-20-2021 02:49 AM)alexgrad Wrote:  A few questions.

1. Is it possible to request the device to report the current internal configuration to the provisioning server using SIP NOTIFY request?
Like Cisco SIP NOTIFY message with the Event: report.

2. Is there a configuration parameter for static.auto_provision.allsettings to report ALL settings (now only settings other than default)?
Like Cisco Report Rule.

3. Is there a configuration parameter for static.auto_provision.allsettings to report settings in XML format?

4. Is there a schema for all configuration parameters with a type of parameter, all available values and a default value?

Hi,

1. No, not that I know of.

2. Yealink IP phones can provide feedback in a variety of forms such as log files, packets, status indicators and so on.
You can find this in the "Settings > Configuration" tab.

3. No, not that I know of.

4. Consult the Admin Guide of the phone you have.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
07-20-2021 07:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Is it possible to set auto_provision.server.url via a servlet call? scully 2 3,707 05-01-2020 01:53 PM
Last Post: richardoux
  firmware.url or static.firmware.url Eastern Oregon Net, Inc. 1 5,464 10-05-2018 05:55 AM
Last Post: NI
  Overwritting Non-Static Values lbriller 0 2,105 09-05-2018 02:09 PM
Last Post: lbriller
Sad [unanswered] auto_provision.custom.sync Upload over HTTP? sexy-trousers 6 12,280 11-28-2016 02:51 PM
Last Post: yarno
  WebUI equivalent of auto_provision.aes_key_in_file mores 2 4,789 06-10-2014 09:16 PM
Last Post: mores

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication