WH62 Disable ringtone base station

[rwilting]

(09-09-2021 03:12 PM)markvdheijden Wrote:  Hi,

You have to set the Base ringtone for both Softphone and Desk phone to "0" in the basic settings.

I updated the firmware and software, but I don't see those options..
That is my main problem, I taped over the speaker, but that's not a solution.    

[markvdheijden]

Wich firmware have you used? You have to install 104.430.0.15 and USB connect 0.33.32.0.

[rwilting]

(09-09-2021 10:07 PM)markvdheijden Wrote:  Wich firmware have you used? You have to install 104.430.0.15 and USB connect 0.33.32.0.

WH62: 104.430.0.15
Connect: 0.32.85.0

If i check for updates, it says Your software is up to date.
Is there a place where i can download 0.33.32.0 manually?

[markvdheijden]

(09-09-2021 10:11 PM)rwilting Wrote:  

(09-09-2021 10:07 PM)markvdheijden Wrote:  Wich firmware have you used? You have to install 104.430.0.15 and USB connect 0.33.32.0.

WH62: 104.430.0.15
Connect: 0.32.85.0

If i check for updates, it says Your software is up to date.
Is there a place where i can download 0.33.32.0 manually?

You can download the firmware here : https://support.yealink.com/en/portal/do...1580dca0a2

[rwilting]

(09-10-2021 02:50 PM)markvdheijden Wrote:  You can download the firmware here : https://support.yealink.com/en/portal/do...1580dca0a2

Thanks Mark! This seems to fix my problem.

[markvdheijden]

(09-10-2021 02:59 PM)rwilting Wrote:  Thanks Mark! This seems to fix my problem.

Great, glad to help!

gr. Mark