[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W60B W56H 10 Seconds to dial phone number
Author Message
bcramer Offline
Junior Member
**

Posts: 16
Joined: Nov 2019
Reputation: 0
Post: #1
W60B W56H 10 Seconds to dial phone number
I have these W56H cordless phones. When you dial a phone number and press the green dial button it takes 10 seconds before the call will connect.

How can I set this phone to dial immediately after entering the 10 digit number?
04-01-2021 02:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,533
Joined: Jan 2014
Reputation: 45
Post: #2
RE: W60B W56H 10 Seconds to dial phone number
(04-01-2021 02:54 AM)bcramer Wrote:  I have these W56H cordless phones. When you dial a phone number and press the green dial button it takes 10 seconds before the call will connect.

How can I set this phone to dial immediately after entering the 10 digit number?

Hi,

Pressing the green button equals immediate dialing.
This is the fastest way to dial a number.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
04-01-2021 03:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bcramer Offline
Junior Member
**

Posts: 16
Joined: Nov 2019
Reputation: 0
Post: #3
RE: W60B W56H 10 Seconds to dial phone number
It appears to be a firmware issue. When running base firmware 77.83.0.25 and W56H firmware 61.83.0.10 I don't have any issue dialing.

When my phone is on base firmware 77.85.0.20 and W56H firmware 61.85.0.20 it takes 10 seconds to connect the call.
04-02-2021 12:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,533
Joined: Jan 2014
Reputation: 45
Post: #4
RE: W60B W56H 10 Seconds to dial phone number
(04-02-2021 12:42 AM)bcramer Wrote:  It appears to be a firmware issue. When running base firmware 77.83.0.25 and W56H firmware 61.83.0.10 I don't have any issue dialing.

When my phone is on base firmware 77.85.0.20 and W56H firmware 61.85.0.20 it takes 10 seconds to connect the call.

Then I suggest that you submit a ticket at Yealink support.
https://ticket.yealink.com/

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
04-02-2021 01:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bcramer Offline
Junior Member
**

Posts: 16
Joined: Nov 2019
Reputation: 0
Post: #5
RE: W60B W56H 10 Seconds to dial phone number
Putting in a ticket....

The system is busy please try again later. Rolleyes
04-02-2021 02:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Outgoing call won't show extension number agl_w73p 0 47 06-11-2024 11:27 PM
Last Post: agl_w73p
Exclamation w90dm/w90b- dect phone w73h dont sync aftert restar w90dm fracust23 4 3,330 06-05-2024 09:30 PM
Last Post: evk.yy
  how to register a T58W with DD10K to a W60B? schogol 6 1,486 04-16-2024 09:54 PM
Last Post: schogol
  Call interrupts after 5-20 seconds telution 0 792 11-14-2023 01:16 AM
Last Post: telution
  How to enable web server/ GUI on W60B and W70B after provisioning has disabled it. jhofford 2 2,804 09-12-2023 08:42 PM
Last Post: jhofford
  W56H initializing/boot loop n.vangelder 3 3,802 05-30-2023 08:33 PM
Last Post: Yisroel_MongoTEL
  Problems setting up W60B and interface issues Ness 4 5,736 03-30-2023 05:24 PM
Last Post: Ness
  Auto Provision firmware on W60B base station hospitale 6 6,604 02-15-2023 05:54 PM
Last Post: hospitale
  recovery mode W60B files Aleskey 3 5,733 02-14-2023 01:42 AM
Last Post: 88fingerslukee
  W60B Constantly Restarts When W73H Is Connected. nolto 0 1,788 02-07-2023 12:15 AM
Last Post: nolto

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication