[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Yealink Forums » IP Phone Series » T5X Series » Can't seem to auto-provision wallpaper T54W

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't seem to auto-provision wallpaper T54W
Author Message
dscope Offline
Junior Member
**

Posts: 9
Joined: Apr 2018
Reputation: 0
Post: #1
Can't seem to auto-provision wallpaper T54W
I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.

Any help appreciated.
10-26-2020 08:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,395
Joined: Jan 2014
Reputation: 40
Post: #2
RE: Can't seem to auto-provision wallpaper T54W
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.

Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.
Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-26-2020 11:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dscope Offline
Junior Member
**

Posts: 9
Joined: Apr 2018
Reputation: 0
Post: #3
RE: Can't seem to auto-provision wallpaper T54W
(10-26-2020 11:51 PM)complex1 Wrote:  
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.

Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.

I tried without "Config:" and .jpg no go.
(10-30-2020 09:39 AM)dscope Wrote:  
(10-26-2020 11:51 PM)complex1 Wrote:  
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.

Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.

I tried without "Config:" and .jpg no go.


I downgraded to version 46.82.0.30 and that worked.

Why doesn't it work with latest firmware?
(This post was last modified: 10-30-2020 10:25 AM by dscope.)
10-30-2020 09:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,395
Joined: Jan 2014
Reputation: 40
Post: #4
RE: Can't seem to auto-provision wallpaper T54W
(10-30-2020 09:39 AM)dscope Wrote:  
(10-26-2020 11:51 PM)complex1 Wrote:  
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.

Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.

I tried without "Config:" and .jpg no go.
(10-30-2020 09:39 AM)dscope Wrote:  
(10-26-2020 11:51 PM)complex1 Wrote:  
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.

Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.

I tried without "Config:" and .jpg no go.


I downgraded to version 46.82.0.30 and that worked.

Why doesn't it work with latest firmware?

This is magic!
You downgrade your T54W with firmware meant for a different phone type and it works? Wouw.
You can make money with it.
Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-30-2020 04:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dscope Offline
Junior Member
**

Posts: 9
Joined: Apr 2018
Reputation: 0
Post: #5
RE: Can't seem to auto-provision wallpaper T54W
(10-30-2020 04:34 PM)complex1 Wrote:  
(10-30-2020 09:39 AM)dscope Wrote:  
(10-26-2020 11:51 PM)complex1 Wrote:  
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.



Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.

I tried without "Config:" and .jpg no go.
(10-30-2020 09:39 AM)dscope Wrote:  
(10-26-2020 11:51 PM)complex1 Wrote:  
(10-26-2020 08:21 AM)dscope Wrote:  I have a T54W with firmware 96.85.0.5
I'm using FusionPBX latest version.

I have the following settings in y00000000000096.cfg

wallpaper_upload.url = https://[domain]/yealink_t54w_wallpaper.png
phone_setting.backgrounds = Config:yealink_t54w_wallpaper.png

Wall paper does not get uploaded and it doesn't display.

However if I manually upload this file, via the phones web gui (Configuration/Import). It works fine.


Any help appreciated.

Hi,

Please try again without "Config:"
phone_setting.backgrounds = yealink_t54w_wallpaper.png

Note: For T54W use .jpg instead of .png as file extension.

Hope this will help.

I tried without "Config:" and .jpg no go.



I downgraded to version 46.82.0.30 and that worked.

Why doesn't it work with latest firmware?

This is magic!
You downgrade your T54W with firmware meant for a different phone type and it works? Wouw.
You can make money with it.



Great sarcasm so early in the morning Smile

I forgot to mention that I had the same problem with a T29G. Better?
10-30-2020 09:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T54W vpn l2tp no registrering on pbx KM-Systems 0 255 02-07-2023 01:48 AM
Last Post: KM-Systems
  T54W with EXP 50 and WH62 stratos 2 2,592 10-14-2022 11:50 AM
Last Post: Scottie
  Bridge WiFi to PC? T54W webbyz 1 866 09-30-2022 05:20 PM
Last Post: complex1
  T54w stuck on welcome after power fail SSPhone 2 1,290 09-19-2022 10:29 PM
Last Post: Yisroel_MongoTEL
  T54W Custom Templet Code charlie@duketel.com 1 1,334 06-09-2022 01:38 AM
Last Post: Yisroel_MongoTEL
  T58 Time/Date blocking wallpaper - how to disable? cmariotti 0 822 06-08-2022 11:22 PM
Last Post: cmariotti
  XML TextMenu Object Problem on T54W FW 96.86.0.45 roemer_m 3 2,106 05-31-2022 02:17 PM
Last Post: roemer_m
  T54W w/DD10K not registering to RT30 Chris708 3 2,385 05-23-2022 10:50 PM
Last Post: Yisroel_MongoTEL
  Yeastar S100 and T54W BLF visual alert name LDAP gugaua 2 2,010 04-22-2022 12:08 AM
Last Post: complex1
  T54W & DD10K USB DECT DONGLE landstartelco 1 2,051 02-18-2022 05:26 PM
Last Post: markvdheijden

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication