[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BLF Light is ON when Unavailable/UNKNOWN
Author Message
Celso Annes Offline
Junior Member
**

Posts: 5
Joined: Sep 2020
Reputation: 0
Post: #1
BLF Light is ON when Unavailable/UNKNOWN
Hi,
I have a T21P_E2 (Firmware 52.84.0.10) the BLF Light is ON when Unavailable/UNKNOWN, is it right?
Is the BLF Light should not turn off when Unavailable?

The same occur on VP59.

Code:
finti*CLI> core show hints

    -= Registered Asterisk Dial Plan Hints =-
7065@default        : SIP/7065              State:Unavailable     Presence:not_set         Watchers  0

Code:
finti*CLI> sip show peers
Name/username             Host                                    Dyn Forcerport Comedia    ACL Port     Status      Description                      Realtime
7065/Celso MicroSip       (Unspecified)                            D  Yes        Yes            0        UNKNOWN                                      Cached RT
09-28-2020 04:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daryl_Yealink Offline
Administrator
*******

Posts: 4
Joined: Jul 2020
Reputation: 0
Post: #2
RE: BLF Light is ON when Unavailable/UNKNOWN
Dear Customer,

This is Daryl from Yealink Support Team, nice to work with you.

1.May I know which PBX you are using? Is it Cisco?

2.I need your help to reproduce this issue and offer me diagnostic files (config.bin / pcap / level-6 syslog) for further troubleshooting. Please refer to below FAQ on how to obtain the files:
http://support.yealink.com/faq/faqInfo?id=707

The specific Operations:
(1)log in the web GUI-> Settings->Configuration-> change the local log level to 6-> Confirm-> press Start
(2) Account->Register-> Change Line Active( used to monitor other phones) to ‘disable’-> Confirm-> Change the Line Active to ‘enable’ ->confirm
(3) Change the status of the monitored account to unavailable or Unknown
(4) Settings->Configuration-> press Stop-> Export All Diagnostic Files-> send to me.


Any queries, please feel free to let me know.

Best Regard,
Daryl
09-29-2020 10:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Celso Annes Offline
Junior Member
**

Posts: 5
Joined: Sep 2020
Reputation: 0
Post: #3
RE: BLF Light is ON when Unavailable/UNKNOWN
(09-29-2020 10:40 AM)Daryl_Yealink Wrote:  Dear Customer,

This is Daryl from Yealink Support Team, nice to work with you.

1.May I know which PBX you are using? Is it Cisco?

2.I need your help to reproduce this issue and offer me diagnostic files (config.bin / pcap / level-6 syslog) for further troubleshooting. Please refer to below FAQ on how to obtain the files:
http://support.yealink.com/faq/faqInfo?id=707

The specific Operations:
(1)log in the web GUI-> Settings->Configuration-> change the local log level to 6-> Confirm-> press Start
(2) Account->Register-> Change Line Active( used to monitor other phones) to ‘disable’-> Confirm-> Change the Line Active to ‘enable’ ->confirm
(3) Change the status of the monitored account to unavailable or Unknown
(4) Settings->Configuration-> press Stop-> Export All Diagnostic Files-> send to me.


Any queries, please feel free to let me know.

Best Regard,
Daryl

Hi Daryl,
I am using Asterisk 16 on a Debian 9:

Here is the diagnostic files: allconfig.tgz
09-29-2020 02:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Celso Annes Offline
Junior Member
**

Posts: 5
Joined: Sep 2020
Reputation: 0
Post: #4
RE: BLF Light is ON when Unavailable/UNKNOWN
(09-29-2020 10:40 AM)Daryl_Yealink Wrote:  Dear Customer,

This is Daryl from Yealink Support Team, nice to work with you.

1.May I know which PBX you are using? Is it Cisco?

2.I need your help to reproduce this issue and offer me diagnostic files (config.bin / pcap / level-6 syslog) for further troubleshooting. Please refer to below FAQ on how to obtain the files:
http://support.yealink.com/faq/faqInfo?id=707

The specific Operations:
(1)log in the web GUI-> Settings->Configuration-> change the local log level to 6-> Confirm-> press Start
(2) Account->Register-> Change Line Active( used to monitor other phones) to ‘disable’-> Confirm-> Change the Line Active to ‘enable’ ->confirm
(3) Change the status of the monitored account to unavailable or Unknown
(4) Settings->Configuration-> press Stop-> Export All Diagnostic Files-> send to me.


Any queries, please feel free to let me know.

Best Regard,
Daryl

Hi, Did you find something?
10-09-2020 06:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Daryl_Yealink Offline
Administrator
*******

Posts: 4
Joined: Jul 2020
Reputation: 0
Post: #5
RE: BLF Light is ON when Unavailable/UNKNOWN
Dear Customer,

Since Yealink have left for the days for celebrating our National Day Holiday and Mid-Autumn Festival and I have no access to voicemail or email from Oct.1st to Oct.8th. Thanks for your patience.

I try to download the diagnostic file, but it shows "ERR_CONNECTION_TIMED_OUT",so could you please send it to my email "daryl@yealink.com"?

I will analyze it and feedback to you after I receive it.
 
Best Regards,
Daryl
10-14-2020 11:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
GNIL Offline
Junior Member
**

Posts: 4
Joined: Jan 2018
Reputation: 0
Post: #6
RE: BLF Light is ON when Unavailable/UNKNOWN
Hi Celso

This is an issue that has been going on for years, but no one at Yealink seems to think it is a problem.
They won't commit to saying it is an issue or why they cannot fix it.
You have more chance (fill in whatever you want) than getting a sensible answer that doesn't involve uploading endless logs to no avail.

Regards
10-24-2020 11:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Celso Annes Offline
Junior Member
**

Posts: 5
Joined: Sep 2020
Reputation: 0
Post: #7
RE: BLF Light is ON when Unavailable/UNKNOWN
Too bad, because the phone is very good.

I hope they change their mind and understand that the representation of the "terminated" status is different from the way they signal today that is like the extension is online.
10-25-2020 01:08 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Celso Annes Offline
Junior Member
**

Posts: 5
Joined: Sep 2020
Reputation: 0
Post: #8
RE: BLF Light is ON when Unavailable/UNKNOWN
(11-22-2020 11:32 PM)Samuelz Wrote:  BLF symptoms are similar to mine.
It's okay, but I let my neighbor fix it.
I don't know how he fixed it.
Will try asking
[Image: games-aw.png]

Please, ask if he can explain to us here.
Thanks
11-23-2020 06:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Always on busy light led on wh66 base not extension supranet2022 0 337 02-06-2024 12:28 PM
Last Post: supranet2022
  T33G - Unknown Symbol - Can't Make Outbound Calls bbopp 0 568 12-09-2023 03:21 AM
Last Post: bbopp
  LDAP server is unavailable Andrei9385 2 9,776 07-16-2021 08:34 PM
Last Post: nolto
  How to deactivate the green LED light? nestman 2 14,020 08-11-2017 09:27 PM
Last Post: nestman
  All phones light screen backlight when call is hung up. Bobcat19 6 18,613 03-28-2017 03:46 AM
Last Post: Jensen_Yealink
  T23G red light flashing for no apparent reason avayax 4 23,531 12-29-2016 12:56 PM
Last Post: oliv
  Email Voicemail and keep the voicemail light on bottomsup6 2 9,248 03-30-2016 10:22 PM
Last Post: bottomsup6
  Service unavailable after one second danield 2 7,760 11-07-2015 08:13 PM
Last Post: Kalle
  Yealink T21P E2 Nebula No MWI Light ? networkscotland 2 10,591 11-03-2015 05:24 PM
Last Post: ajay11
  Voicemail Light - How to clear voicemails? lux eye 3 46,822 04-23-2015 03:24 AM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication