[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Phone features not working
Author Message
KenleyHickman Offline
Junior Member
**

Posts: 6
Joined: Sep 2020
Reputation: 0
Post: #1
Phone features not working
I can set DND on my phone, but when I call it, it rings normally. Also, call foward is not working and doing the same thing. Any suggestions of what to check?
09-11-2020 04:18 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 992
Joined: Jan 2014
Reputation: 26
Post: #2
RE: Phone features not working
(09-11-2020 04:18 PM)KenleyHickman Wrote:  I can set DND on my phone, but when I call it, it rings normally. Also, call foward is not working and doing the same thing. Any suggestions of what to check?

Hi,

Please try next:
DND: Features > Forward & DND > DND > DND status: ON
The phone won't ring anymore.

Call Forward: Features > Forward & DND > Always Forward: ON and set Target: Destination number
The phone will forward an incoming call to the destination number.

Hope this will help.

Kind regards,
Frank.

Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-11-2020 05:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KenleyHickman Offline
Junior Member
**

Posts: 6
Joined: Sep 2020
Reputation: 0
Post: #3
RE: Phone features not working
Thank you.

I tried that. Phone even shows "DND mode enabled" when I turn on DND but calls still go to the phone.

And, call forward shows "calls will be forwarded" but calls still go to the phone instead of forwarding.

Any other suggestions?
09-11-2020 07:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 992
Joined: Jan 2014
Reputation: 26
Post: #4
RE: Phone features not working
(09-11-2020 07:27 PM)KenleyHickman Wrote:  Thank you.

I tried that. Phone even shows "DND mode enabled" when I turn on DND but calls still go to the phone.

And, call forward shows "calls will be forwarded" but calls still go to the phone instead of forwarding.

Any other suggestions?

Hi,

Please try this one:
Features > General Information > Return Code When DND: "486 (Busy Here)"

Kind regards,
Frank.

Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-11-2020 08:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KenleyHickman Offline
Junior Member
**

Posts: 6
Joined: Sep 2020
Reputation: 0
Post: #5
RE: Phone features not working
(09-11-2020 08:28 PM)complex1 Wrote:  
(09-11-2020 07:27 PM)KenleyHickman Wrote:  Thank you.

I tried that. Phone even shows "DND mode enabled" when I turn on DND but calls still go to the phone.

And, call forward shows "calls will be forwarded" but calls still go to the phone instead of forwarding.

Any other suggestions?

Hi,

Please try this one:
Features > General Information > Return Code When DND: "486 (Busy Here)"

I don't have "general information" under the features tab. Under the features I have "call forward, call waiting, auto answer, DSS, DND, intercom, diagnostics, others.


I'm using a T46S Phone.
09-11-2020 08:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 992
Joined: Jan 2014
Reputation: 26
Post: #6
RE: Phone features not working
(09-11-2020 08:52 PM)KenleyHickman Wrote:  
(09-11-2020 08:28 PM)complex1 Wrote:  
(09-11-2020 07:27 PM)KenleyHickman Wrote:  Thank you.

I tried that. Phone even shows "DND mode enabled" when I turn on DND but calls still go to the phone.

And, call forward shows "calls will be forwarded" but calls still go to the phone instead of forwarding.

Any other suggestions?

Hi,

Please try this one:
Features > General Information > Return Code When DND: "486 (Busy Here)"

I don't have "general information" under the features tab. Under the features I have "call forward, call waiting, auto answer, DSS, DND, intercom, diagnostics, others.


I'm using a T46S Phone.

Is your phone running on the latest firmware 66.85.0.5 ?
If not, please upgrade and do not forget after the upgrade is finished to reset the phone to factory default.

Kind regards,
Frank.

Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-12-2020 11:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KenleyHickman Offline
Junior Member
**

Posts: 6
Joined: Sep 2020
Reputation: 0
Post: #7
RE: Phone features not working
(09-12-2020 11:42 AM)complex1 Wrote:  
(09-11-2020 08:52 PM)KenleyHickman Wrote:  
(09-11-2020 08:28 PM)complex1 Wrote:  
(09-11-2020 07:27 PM)KenleyHickman Wrote:  Thank you.

I tried that. Phone even shows "DND mode enabled" when I turn on DND but calls still go to the phone.

And, call forward shows "calls will be forwarded" but calls still go to the phone instead of forwarding.

Any other suggestions?

Hi,

Please try this one:
Features > General Information > Return Code When DND: "486 (Busy Here)"

I don't have "general information" under the features tab. Under the features I have "call forward, call waiting, auto answer, DSS, DND, intercom, diagnostics, others.


I'm using a T46S Phone.

Is your phone running on the latest firmware 66.85.0.5 ?
If not, please upgrade and do not forget after the upgrade is finished to reset the phone to factory default.

I upgraded to 66.85.0.36 last week. Now I should upgrade to 66.85.0.5 and try everything again?
09-14-2020 01:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 992
Joined: Jan 2014
Reputation: 26
Post: #8
RE: Phone features not working
(09-14-2020 01:07 PM)KenleyHickman Wrote:  
(09-12-2020 11:42 AM)complex1 Wrote:  Is your phone running on the latest firmware 66.85.0.5 ?
If not, please upgrade and do not forget after the upgrade is finished to reset the phone to factory default.

I upgraded to 66.85.0.36 last week. Now I should upgrade to 66.85.0.5 and try everything again?

66.85.0.36????
Are you using special firmware provided directly by Yealink support ????

Kind regards,
Frank.

Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-14-2020 02:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KenleyHickman Offline
Junior Member
**

Posts: 6
Joined: Sep 2020
Reputation: 0
Post: #9
RE: Phone features not working
(09-14-2020 02:28 PM)complex1 Wrote:  
(09-14-2020 01:07 PM)KenleyHickman Wrote:  
(09-12-2020 11:42 AM)complex1 Wrote:  Is your phone running on the latest firmware 66.85.0.5 ?
If not, please upgrade and do not forget after the upgrade is finished to reset the phone to factory default.

I upgraded to 66.85.0.36 last week. Now I should upgrade to 66.85.0.5 and try everything again?

66.85.0.36????
Are you using special firmware provided directly by Yealink support ????

It's not built specifically for me. Last week I had an issue and they gave me that software load to use. They didn't even say anything about going to 66.85.0.5.
(This post was last modified: 09-14-2020 02:46 PM by KenleyHickman.)
09-14-2020 02:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 992
Joined: Jan 2014
Reputation: 26
Post: #10
RE: Phone features not working
(09-14-2020 02:45 PM)KenleyHickman Wrote:  
(09-14-2020 02:28 PM)complex1 Wrote:  
(09-14-2020 01:07 PM)KenleyHickman Wrote:  
(09-12-2020 11:42 AM)complex1 Wrote:  Is your phone running on the latest firmware 66.85.0.5 ?
If not, please upgrade and do not forget after the upgrade is finished to reset the phone to factory default.

I upgraded to 66.85.0.36 last week. Now I should upgrade to 66.85.0.5 and try everything again?

66.85.0.36????
Are you using special firmware provided directly by Yealink support ????

It's not built specifically for me. Last week I had an issue and they gave me that software load to use. They didn't even say anything about going to 66.85.0.5.

I guess you have to ask Yealink if this firmware (.36) can break the DND functionality.

Kind regards,
Frank.

Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-14-2020 03:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Phone book search with accented characters Maxence 0 99 11-16-2020 07:18 PM
Last Post: Maxence
  T46s phone locking users out with continuous bad password attempts. jwilson@thehills 0 294 10-08-2020 10:05 PM
Last Post: jwilson@thehills
  t48G SFB not working at all now j.pakula 0 470 06-22-2020 02:36 PM
Last Post: j.pakula
  Port Knock application on phone AndyInNJ 0 461 04-02-2020 08:56 PM
Last Post: AndyInNJ
  Tim&Date Not working Brian1949 4 1,529 03-15-2020 09:11 AM
Last Post: complex1
  Stop displaying Username on phone after call is connected rtilleman 0 620 02-10-2020 11:37 PM
Last Post: rtilleman
Exclamation T46S - Call Forward missing from Features Menu on Phone mmoore 1 1,781 01-16-2020 07:41 PM
Last Post: complex1
  T48G SIP Phone Register Status Disabled guendfi 0 867 12-16-2019 07:34 PM
Last Post: guendfi
  Skype for Business contact called by e-mail and not phone number primator 0 831 09-10-2019 02:08 PM
Last Post: primator
  T46S voicemail key not working (off hook) Advance2000 6 3,798 08-31-2019 07:29 AM
Last Post: rithvik

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication