[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to register T41S using DD10 dongle to W60 base
Author Message
Babylonia Offline
Junior Member
**

Posts: 39
Joined: Jun 2019
Reputation: 0
Post: #1
How to register T41S using DD10 dongle to W60 base
Hello,

In past I had successfully registered the T41S desktop phone to the W60 DECT base station
Using a DD10 dongle within the USB-port.

Normally I am using a WiFi dongle WF50 for the T41S to connect to the network.
(Using separate VOIP SIP-accounts set within the T41S).

As I have updated all firmware to the latest version for my phones.
I also want to update the special "DECT" firmware as used within the T41S

That DECT update version = T41S(T42S)-ddphone-66.84.0.115.rom

USB is enabled within the T41S, (so the DECT dongle should be working).
In spite the menu says "No USB attached". (Could be related to USB memory stick ??).
At least, as soon as I go back to the USB WiFi-dongle. It is found and do have a WiFi connection.

Still the "old" registering credentials within my W60 base station are there
for circumstances when using the DECT dongle.
So I suppose I have to register the TS41S again to the W60 base station.

W60 base station is updated by firmware file W60B-77.83.0.85.rom
W56 hand sets are updated by firmware file W56H-61.83.0.90.rom

The "normal" TS41S firmware is updated by file T46S(T48S,T42S,T41S)-66.85.0.5.rom

But still want to update the "separate" DECT firmware to file T41S(T42S)-ddphone-66.84.0.115.rom

It has to be done by the W60 base station, and choosing that file to send to the "hand sets".

Please can somebody point me to the right direction?
06-13-2020 04:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,285
Joined: Jan 2014
Reputation: 39
Post: #2
RE: How to register T41S using DD10 dongle to W60 base
Hi,

I do not have the configuration as you have, but if I read the steps you took to update the DD10K and compare it to the manuals, I think you have used the correct procedure.

My question: Did you reset all devices to factory settings after the firmware update before trying to connect / upgrade the DD10K?

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
06-13-2020 09:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Babylonia Offline
Junior Member
**

Posts: 39
Joined: Jun 2019
Reputation: 0
Post: #3
RE: How to register T41S using DD10 dongle to W60 base
(06-13-2020 09:22 PM)complex1 Wrote:  My question: Did you reset all devices to factory settings after the firmware update before trying to connect / upgrade the DD10K?

No I didn't. In past, that wasn't necessary.
Choosing for DECT (DK10) you do get the "DECT" user gui.
Using an ethernet cable or W50 WiFi dongle you do get the "deskphone" user gui.

I shall give it a try in the next couple of days.

Thank you for your response.
06-14-2020 02:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  All handsets on the same W60B loose registration after many attempts to register Alvaro Gutierrez 1 3,563 06-23-2022 09:56 PM
Last Post: rdurham
  W60B base firmware downgrade RingCentral brewginger 2 2,294 01-18-2022 12:58 AM
Last Post: brewginger
  The handset terminal does not see the base station wasp-1111 2 2,183 01-07-2022 12:14 AM
Last Post: Yisroel_MongoTEL
Question W80B dm-base role Lansalot 0 1,400 12-09-2021 11:05 PM
Last Post: Lansalot
  "Register Request no response!" every 2 minutes w60B-Spain 2 3,037 10-12-2021 05:25 PM
Last Post: w60B-Spain
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 2 4,718 01-11-2021 11:40 PM
Last Post: stéphane
  Can't Register to Asterisk PBX ogoncalves 1 3,234 12-27-2020 11:39 PM
Last Post: complex1
  [SOLVED] DECT dongle DD10K - bad performance in combination to T41S + W60P Babylonia 4 7,629 10-02-2019 10:02 PM
Last Post: Babylonia
  W60P disconnects and fails to register jshaflucas 0 3,552 12-19-2018 09:46 PM
Last Post: jshaflucas
  How to upgrade W52P handset firmware via W60B base?? regan 5 18,351 03-14-2018 10:42 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication