[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autoprovision - LED Light Flashing [Resolved]
Author Message
voipsupport Offline
Junior Member
**

Posts: 7
Joined: Apr 2020
Reputation: 0
Post: #1
Question Autoprovision - LED Light Flashing [Resolved]
Hello,

I was wondering if anybody else has come across a weird issue with auto-provisioning on the newer firmware.

I have my yealink templates configured to auto-provision the phone every 1 hour.

On the older firmware this process was silent. (No LED flashing, Unless the phone found a change, and was about to reboot)

I downgraded the firmware to (T48S 66.83.0.35) and the issue goes away, the phone still perform the hourly check, but silently.

I've tested the following firmware's and the issue is not present.

T46S(T48S,T42S,T41S)-66.83.0.50
T46S(T48S,T42S,T41S)-66.84.0.10
T46S(T48S,T42S,T41S)-66.84.0.15


Newer firmware, this process is no longer silent. (The LED begins flashing as soon as it begins checking for an update, and continues blinking for approximately 30 seconds until it completes the process.)

T46S(T48S,T42S,T41S)-66.84.0.80

Is there a configuration option to make this silent again? Its causing confusion with some of our larger clients.

Thank you.
(This post was last modified: 05-01-2020 06:49 PM by voipsupport.)
04-30-2020 06:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
voipsupport Offline
Junior Member
**

Posts: 7
Joined: Apr 2020
Reputation: 0
Post: #2
RE: Autoprovision - LED Light Flashing
(04-30-2020 06:02 AM)voipsupport Wrote:  Hello,

I was wondering if anybody else has come across a weird issue with auto-provisioning on the newer firmware.

I have my yealink templates configured to auto-provision the phone every 1 hour.

On the older firmware this process was silent. (No LED flashing, Unless the phone found a change, and was about to reboot)

I downgraded the firmware to (T48S 66.83.0.35) and the issue goes away, the phone still perform the hourly check, but silently.

I've tested the following firmware's and the issue is not present.

T46S(T48S,T42S,T41S)-66.83.0.50
T46S(T48S,T42S,T41S)-66.84.0.10
T46S(T48S,T42S,T41S)-66.84.0.15


Newer firmware, this process is no longer silent. (The LED begins flashing as soon as it begins checking for an update, and continues blinking for approximately 30 seconds until it completes the process.)

T46S(T48S,T42S,T41S)-66.84.0.80

Is there a configuration option to make this silent again? Its causing confusion with some of our larger clients.

Thank you.

Issue was resolved here:

http://forum.yealink.com/forum/showthrea...8#pid68288
05-01-2020 06:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Backlight comes on after autoprovision jonathanattwood 0 2,441 12-21-2021 10:30 PM
Last Post: jonathanattwood
  BLF Light stuck on busy for select users papergavin 1 7,156 10-15-2018 08:45 PM
Last Post: jolouis
  T46G: Power LED always flashing when backlight is off Artabanos 125 399,871 10-15-2018 03:55 PM
Last Post: Who
  T48S Autoprovision admin password srcurtis 3 19,693 06-12-2018 01:58 PM
Last Post: complex1
  [T48g] Missed Call is not resolved thorugh LDAP TPM 1 5,255 03-02-2018 09:52 AM
Last Post: Lucia_Yealink
  T4XG series not able to autoprovision over https with FreePBX 14 JaredBusch 5 13,881 02-27-2018 11:20 PM
Last Post: JaredBusch
  Blank screen and flashing indicator GIWM 8 20,823 02-12-2018 08:08 PM
Last Post: Jerry777
  T46G Red Light Blinking Inga 4 13,659 10-23-2017 09:19 AM
Last Post: Johnson_Yealink
  T46 28.82.0.20 Flashing Message Waiting Light sfrazier 8 19,993 10-23-2017 08:59 AM
Last Post: Strange World
  autoprovision ringtones bug blakeflorin 5 13,252 10-04-2017 07:04 PM
Last Post: jcaruso

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication