Log in

tima · 03-08-2020 06:14 AM

Using latest w60b/56h firmware and using sla. All handsets enabled for all lines. Placing a call on hold shows sca flashing and the line showing held but on other handsets there is no retrieve call option in sca.

Verified not using private hold. Any ideas?

Tim

bdm · 03-04-2021 01:47 PM

Did you ever figure out the solution to this? I am experiencing the same behavior. I have my W60B registered to a FusionPBX.

- Brad

(03-08-2020 06:14 AM)tima Wrote: Using latest w60b/56h firmware and using sla. All handsets enabled for all lines. Placing a call on hold shows sca flashing and the line showing held but on other handsets there is no retrieve call option in sca.

Verified not using private hold. Any ideas?

Tim

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Call interrupts after 5-20 seconds	telution	0	629	11-14-2023 01:16 AM Last Post: telution
	All handsets on the same W60B loose registration after many attempts to register	Alvaro Gutierrez	1	5,766	06-23-2022 09:56 PM Last Post: rdurham
	Beep after ringing when call is answered	cinergi	10	17,628	06-10-2022 08:33 AM Last Post: SGFC
	Handsets LED not indication Voicemail notification	Bob_	0	1,761	05-08-2022 09:50 PM Last Post: Bob_
	Several seconds delay after accepting the call.	mustimese	2	5,812	09-09-2021 05:02 AM Last Post: mustimese
	Dial tone keeps ongoing even when call is rejected at destination	w60B-Spain	4	7,177	09-03-2021 12:28 AM Last Post: w60B-Spain
	W60B & RT30 Only 4 handsets ring	Nigel 21	4	9,300	07-26-2021 03:20 PM Last Post: Steffen.Hager
	Audio delay when call answered	tjwesto	4	11,280	09-15-2020 01:56 PM Last Post: complex1
	How to delete "missed call" notifcations from ALL w56H handsets at once?	nangers123	3	9,480	07-10-2020 03:06 PM Last Post: complex1
	can't OTA update handsets	akp55	8	15,193	04-15-2020 04:36 PM Last Post: complex1

Threaded Mode \| Linear Mode SCA showing call held but no soft key to retrieve on other handsets
Author	Message