[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41P-Call Forward Off Code don't work ??
Author Message
flgh Offline
Junior Member
**

Posts: 2
Joined: Feb 2020
Reputation: 0
Post: #1
T41P-Call Forward Off Code don't work ??
Hi,
i have a single fon T41P on Digibox Premium (like Bintec be.ip) und use Call Forwarding extern in the German Telekom PSTN with the codes switch on *21*target Number# and switch off #21#. I use not the intern codes of Digibox *11 and #11.
Parameters in Yealink:
forward.always.on_code = 0*21*
forward.always.off_code = 0#21#

When i switch on the Call Forwarding, the function is OK. But the code for switch off dosn't work. In the log of Digibox i can see that the Yealink sends the switch off code with the target Number. I think that is the bug. Can you fix it? In firmware T41-36.81.0.110 it works fine. In all newer firmwares it is not OK.

Trace Digibox:
2020-02-01 09:40:10.085 MESSAGE tpl.c( 960) :
--> from <192.168.99.197:5060;transport=udp>
INVITE sip:0#21#01716578929#@192.168.99.254:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.99.197:5060;branch=z9hG4bK2915600711
From: <sip:65@192.168.99.254:5060>;tag=2162311559
To: <sip:0#21#01716578929#@192.168.99.254:5060>
Call-ID: 0_316117378@192.168.99.197
CSeq: 1 INVITE
Contact: <sip:65@192.168.99.197:5060>

I read in this Issue the same problem (for T46G) >>> (Why only fixes for 46G and not for all other Products ??):
http://forum.yealink.com/forum/showthrea...7&pid=#pid

Thanks for help, flgh
02-02-2020 02:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
flgh Offline
Junior Member
**

Posts: 2
Joined: Feb 2020
Reputation: 0
Post: #2
RE: T41P-Call Forward Off Code don't work ??
No help here ? Angel
(This post was last modified: 03-04-2020 04:44 PM by flgh.)
03-04-2020 04:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #3
RE: T41P-Call Forward Off Code don't work ??
Not sure, try opening a ticket on the support site and see what they say. If anything this sounds more like a bug/problem on your Digibox as sending the off code along with the number the phone had itself forwarded to makes sense. If your PBX doesn't like the extra digits, it should be dropping/ignoring them.
03-05-2020 03:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ended call still rings on receiver devices casi-online 2 1,523 08-05-2021 06:40 PM
Last Post: casi-online
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 37,922 08-01-2021 06:14 PM
Last Post: Phil2021
  Rearrange in call buttons frichardson 0 996 06-16-2021 11:53 PM
Last Post: frichardson
  T41P Yealink phone wants to talk to the Verizon mother ship nestman 1 1,619 06-14-2021 05:00 PM
Last Post: complex1
  T41P and OpenVPN coltarushalo 0 1,123 05-26-2021 02:58 AM
Last Post: coltarushalo
  T41S: Bridge current call with a second incoming call digitel 1 1,642 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 7,066 04-16-2021 05:34 PM
Last Post: Oliaargau
  Stop displaying Username on phone after call is connected rtilleman 1 2,510 04-06-2021 12:19 AM
Last Post: marcelm
  Call Park + Audible / Visual Alerts bdm 0 1,240 02-23-2021 04:24 AM
Last Post: bdm
  Call-Info sip header for T46G sidjf3zhdu 9 18,790 02-22-2021 04:06 PM
Last Post: jiansong

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication