[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dial plan - How to include # at end of dial string
Author Message
cmadeiros@tecs.bm Offline
Junior Member
**

Posts: 3
Joined: Nov 2016
Reputation: 0
Post: #1
Dial plan - How to include # at end of dial string
Trying to configure dial plan to include the # symbol at the end of the dial number or string. We have Yealink Phones working with an Avaya PBX system which accepts short codes e.g. Call pickup Extension would be *32*2345# where 2345 is the extension number. However when entering
the short code sequence on the Yealink Phone you get "Invalid Number" when you enter #
12-10-2019 03:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Dial plan - How to include # at end of dial string
(12-10-2019 03:13 PM)cmadeiros@tecs.bm Wrote:  Trying to configure dial plan to include the # symbol at the end of the dial number or string. We have Yealink Phones working with an Avaya PBX system which accepts short codes e.g. Call pickup Extension would be *32*2345# where 2345 is the extension number. However when entering
the short code sequence on the Yealink Phone you get "Invalid Number" when you enter #

Hi,

Default on Yealink phones, the “#” key is assign as Send key.
Please disable and try again.
Features > General Information > Key As Send: disabled

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
12-10-2019 06:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cmadeiros@tecs.bm Offline
Junior Member
**

Posts: 3
Joined: Nov 2016
Reputation: 0
Post: #3
RE: Dial plan - How to include # at end of dial string
Hi - Thanks for the reply..and no problem with the English...understood you first time. I did disable Key As Send and confirmed that i can include # in the dial string. The Challenge is getting the correct sequence to dial out. For example if i program one of the buttons for BLF for extn 2233 and configure Pickup Code as *32*#. When someone calls that extension, I can see call flash/ring on the Yealink button and if i select the button to initiate the pickup code it dials out *32*# instead of *32*2233# which is required to pickup the call.

I think i am getting closer to the correct configuration.

tks
12-11-2019 12:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #4
RE: Dial plan - How to include # at end of dial string
(12-11-2019 12:15 AM)cmadeiros@tecs.bm Wrote:  Hi - Thanks for the reply..and no problem with the English...understood you first time. I did disable Key As Send and confirmed that i can include # in the dial string. The Challenge is getting the correct sequence to dial out. For example if i program one of the buttons for BLF for extn 2233 and configure Pickup Code as *32*#. When someone calls that extension, I can see call flash/ring on the Yealink button and if i select the button to initiate the pickup code it dials out *32*# instead of *32*2233# which is required to pickup the call.

I think i am getting closer to the correct configuration.

tks

Hi,

Do you mean something like this?
   

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
12-11-2019 02:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cmadeiros@tecs.bm Offline
Junior Member
**

Posts: 3
Joined: Nov 2016
Reputation: 0
Post: #5
RE: Dial plan - How to include # at end of dial string
Hi Frank - Correct..which is what i tried in the configuration but the actual dial string that goes out is *32*22332233 instead of *32*2233#

rgds,
Carlos
12-11-2019 02:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #6
RE: Dial plan - How to include # at end of dial string
(12-11-2019 02:43 PM)cmadeiros@tecs.bm Wrote:  Hi Frank - Correct..which is what i tried in the configuration but the actual dial string that goes out is *32*22332233 instead of *32*2233#

rgds,
Carlos

Hi Carlos,

I guess the PBX is "causing" the trouble.
Please add only *32* (nothing more) in the Extension field and try again.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
12-11-2019 03:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Dial replace Scottie 0 891 06-11-2023 06:33 PM
Last Post: Scottie
  Dial Plan on W70B feedgenic 0 1,435 10-03-2022 04:58 PM
Last Post: feedgenic
  Dial pause or delay jsubirana 0 3,127 12-01-2021 05:38 PM
Last Post: jsubirana
  speed dial to an IP address (ext@IP on value) EduardoV 3 8,386 11-07-2019 07:43 PM
Last Post: EduardoV
  DND Dial 2 Codes at once Blake1 0 4,256 05-29-2018 02:25 PM
Last Post: Blake1
  Yealink Dial Plan RobertCrawford 8 23,033 03-09-2018 06:38 AM
Last Post: Johnny88
  Macro String Question n00604443 1 6,660 01-24-2018 09:29 PM
Last Post: E123
  Change label string Daniel Velasco 2 8,467 03-17-2016 12:30 AM
Last Post: Daniel Velasco
  Include credentials in DSS Key URL FurnicK 3 9,651 08-26-2015 02:08 PM
Last Post: FurnicK
  SIP-T32G - Dial a number sent from a PC fails dspringer 1 7,576 08-15-2015 06:22 AM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication