[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T27G Firmware Update Failed
Author Message
Infonetx Offline
Junior Member
**

Posts: 5
Joined: Nov 2019
Reputation: 0
Post: #1
T27G Firmware Update Failed
We recently updated to 3cx Version 16. I was working in updating our Yealink T27Gs and T27Ps firmware versions. The T27Ps went fine. But the T27Gs fail. This includes through their management console and manually through the web GUI of the T27G. Was using 3cx provided Firmware, T27G-69.84.0.95, but also tried Yealinks T27G-69.84.0.90.

Currently on:
Version
Firmware Version 69.83.0.55
Hardware Version 69.0.0.0.0.0.0
11-12-2019 05:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,541
Joined: Jan 2014
Reputation: 48
Post: #2
RE: T27G Firmware Update Failed
(11-12-2019 05:58 PM)Infonetx Wrote:  We recently updated to 3cx Version 16. I was working in updating our Yealink T27Gs and T27Ps firmware versions. The T27Ps went fine. But the T27Gs fail. This includes through their management console and manually through the web GUI of the T27G. Was using 3cx provided Firmware, T27G-69.84.0.95, but also tried Yealinks T27G-69.84.0.90.

Currently on:
Version
Firmware Version 69.83.0.55
Hardware Version 69.0.0.0.0.0.0

Hi,

Please follow next steps and try again:

- Reset the phone(s) to Factory default and do not re-provisioning.
- Download the T27G-69.84.0.90.rom file directly from the Yealink site (http://support.yealink.com/documentFront...entId=138)
- Manually update the phone(s) with the downloaded file
- Reset to Factory default and check on the new firmware version
- Re-provisioning the phone

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-12-2019 06:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Infonetx Offline
Junior Member
**

Posts: 5
Joined: Nov 2019
Reputation: 0
Post: #3
RE: T27G Firmware Update Failed
I appreciate the reply.

I went through the steps as you laid them out.
- Factory default, by holding okay and selecting yes.
- Downloaded, and attempted to install the T27G-69.84.0.90.rom from Yealink. Gave me a 'Firmware Update Failed! Rebooting, please wait...'
-I went ahead and factory defaulted and checked the firmware version, just in case, still the same version.
- Following the most recent factory default, I tried some of the newer, but not newest versions of firmware from Yealink as well, but all failed. Each accompanied by a factory default prior to. (I tried Yealink 69.84.0.80, 69.84.0.10, as well as the 69.84.0.95 for the T27G from 3CX)
11-12-2019 08:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,541
Joined: Jan 2014
Reputation: 48
Post: #4
RE: T27G Firmware Update Failed
(11-12-2019 08:36 PM)Infonetx Wrote:  I appreciate the reply.

I went through the steps as you laid them out.
- Factory default, by holding okay and selecting yes.
- Downloaded, and attempted to install the T27G-69.84.0.90.rom from Yealink. Gave me a 'Firmware Update Failed! Rebooting, please wait...'
-I went ahead and factory defaulted and checked the firmware version, just in case, still the same version.
- Following the most recent factory default, I tried some of the newer, but not newest versions of firmware from Yealink as well, but all failed. Each accompanied by a factory default prior to. (I tried Yealink 69.84.0.80, 69.84.0.10, as well as the 69.84.0.95 for the T27G from 3CX)

Hi,

- On how many T27Gs are you talking about?
- Do all T27Gs have the same problem?
- Are you the first owner of the devices?
- Are the phones bought/delivered from a reseller or telecom provider?

I do not know if it is still possible to downgrade the firmware, but please try 69.83.0.50 first.
If this will work then upgrade to the latest one.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-12-2019 09:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Infonetx Offline
Junior Member
**

Posts: 5
Joined: Nov 2019
Reputation: 0
Post: #5
RE: T27G Firmware Update Failed
One one in my current setup.

I have another installation nearby that is also having the same issue with their T27Gs. I usually rectify mine then carry that solution onto theirs in instances like this.

Yes we are the first owners.

The phones are purchased from 888VOIP Telecom Distributor.
11-14-2019 08:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Infonetx Offline
Junior Member
**

Posts: 5
Joined: Nov 2019
Reputation: 0
Post: #6
RE: T27G Firmware Update Failed
Okay. I now have multiple T27Gs in my possession that are behaving the same. They both also failed the downgrade to 69.83.0.50, simply citing that the Firmware Update Failed. Also these two phones despite being the same model have wildly different MAC addresses.
11-19-2019 07:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,541
Joined: Jan 2014
Reputation: 48
Post: #7
RE: T27G Firmware Update Failed
I guess 888VOIP is a good and reliable Telecom Provider.
Why not asking them to help? Shorter line?
May just these two phones are allocated to their RPS server and every time you try to change the firmware, the RPS server revert it back?

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
11-20-2019 03:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Liberteks Offline
Junior Member
**

Posts: 3
Joined: Mar 2018
Reputation: 0
Post: #8
RE: T27G Firmware Update Failed
I can across this thread as I'm having this issue with a T46S.
The link brought me to a page with a "!". What is the current link?


(11-12-2019 06:48 PM)complex1 Wrote:  
(11-12-2019 05:58 PM)Infonetx Wrote:  We recently updated to 3cx Version 16. I was working in updating our Yealink T27Gs and T27Ps firmware versions. The T27Ps went fine. But the T27Gs fail. This includes through their management console and manually through the web GUI of the T27G. Was using 3cx provided Firmware, T27G-69.84.0.95, but also tried Yealinks T27G-69.84.0.90.

Currently on:
Version
Firmware Version 69.83.0.55
Hardware Version 69.0.0.0.0.0.0

Hi,

Please follow next steps and try again:

- Reset the phone(s) to Factory default and do not re-provisioning.
- Download the T27G-69.84.0.90.rom file directly from the Yealink site (http://support.yealink.com/documentFront...entId=138)
- Manually update the phone(s) with the downloaded file
- Reset to Factory default and check on the new firmware version
- Re-provisioning the phone

Hope this will help.
08-03-2020 03:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,541
Joined: Jan 2014
Reputation: 48
Post: #9
RE: T27G Firmware Update Failed
(08-03-2020 03:05 PM)Liberteks Wrote:  I can across this thread as I'm having this issue with a T46S.
The link brought me to a page with a "!". What is the current link?

Hi,

If your phone is part of a 3CX environment, then provisioning the phone from 3CX and update the by 3CX supported firmware (66.85.0.5).

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
08-03-2020 03:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP54 with SBA -Failed to connect with SBA shalid 0 1,470 10-04-2023 08:54 PM
Last Post: shalid
  MP54 Firmware guywonnacott 0 2,700 05-04-2023 05:56 PM
Last Post: guywonnacott
  T19p E2 recovery firmware Jensen 1 3,660 10-25-2022 07:33 PM
Last Post: complex1
  T27G - DNS SRV not registering to updated IP jrobs 0 3,080 12-02-2021 03:54 AM
Last Post: jrobs
  T27G - 3cx and SIP tonydav67 3 10,564 10-13-2020 12:45 AM
Last Post: tonydav67
  Yealink T27G Line Key BLFs Flash During Ring All Infonetx 0 5,197 02-17-2020 06:53 PM
Last Post: Infonetx
  T27G backlight keeps lighting up RSK 2 9,468 07-02-2019 07:16 AM
Last Post: complex1
  Does T27G support custom logo? nSolvePaul 2 10,587 04-01-2019 05:33 AM
Last Post: Dorothy5230
  T19P E2 auto provision firmware. NI 1 8,379 10-08-2018 05:15 PM
Last Post: NI
  Yealink T58A Firmware runek@sildelaget.no 0 9,288 07-04-2018 01:04 PM
Last Post: runek@sildelaget.no

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication