[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cannot upgrade or downgrade from x.83.0.55 firmware
Author Message
kenhoosen Offline
Junior Member
**

Posts: 6
Joined: Aug 2017
Reputation: 0
Post: #1
cannot upgrade or downgrade from x.83.0.55 firmware
We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.
10-23-2019 03:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

Hi,

What you can try is to download the firmware from the 3CX site and do a manual update into the phone(s).
The 3CX supported firmware can be download from here:
https://www.3cx.com/support/phone-firmwares/

Please do not forget to reset the phone to factory default, by long press the OK button, after you have upgraded the phones.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-23-2019 05:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kenhoosen Offline
Junior Member
**

Posts: 6
Joined: Aug 2017
Reputation: 0
Post: #3
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(10-23-2019 05:51 PM)complex1 Wrote:  
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

Hi,

What you can try is to download the firmware from the 3CX site and do a manual update into the phone(s).
The 3CX supported firmware can be download from here:
https://www.3cx.com/support/phone-firmwares/

Please do not forget to reset the phone to factory default, by long press the OK button, after you have upgraded the phones.

Hope this will help.

I should have clarified myself. I originally attempted to update the firmware via the 3CX interface. But, it seemed to do nothing. So I proceeded to do multiple attempts at manual updates of the phones. I have tried the firmware provided by 3CX and multiple versions of firmware provided by Yealink. I've tried both, updating after the phone is provisioned, and after a factory reset.

I've done multiple searches to find an answer to this issue. I did find some other posts that mention what appears to be the same issue with x.83.0.55 failing an upgrade or downgrade. But, I have not found any solutions to the problem.

Thanks.
10-23-2019 07:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mujizac Offline
Junior Member
**

Posts: 6
Joined: Dec 2015
Reputation: 0
Post: #4
RE: cannot upgrade or downgrade from x.83.0.55 firmware
I am having this issue! I think I found a fix. Grab the 66.84.0.35 firmware, flash to that first.
https://downloads.3cx.com/downloads/v160...4.0.35.rom

From there it's looking like it's accepting the .95

I've had something like this before, but this one was super crap. It took looking at another install and seeing what firmware those phones where on.
10-23-2019 08:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kenhoosen Offline
Junior Member
**

Posts: 6
Joined: Aug 2017
Reputation: 0
Post: #5
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(10-23-2019 08:42 PM)mujizac Wrote:  I am having this issue! I think I found a fix. Grab the 66.84.0.35 firmware, flash to that first.
https://downloads.3cx.com/downloads/v160...4.0.35.rom

From there it's looking like it's accepting the .95

I've had something like this before, but this one was super crap. It took looking at another install and seeing what firmware those phones where on.

That worked! Thank you!
10-23-2019 09:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bardentech Offline
Junior Member
**

Posts: 2
Joined: May 2019
Reputation: 0
Post: #6
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

I'm having this issue right now. Did you get it resolved?
12-02-2019 06:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kenhoosen Offline
Junior Member
**

Posts: 6
Joined: Aug 2017
Reputation: 0
Post: #7
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(12-02-2019 06:22 PM)bardentech Wrote:  
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

I'm having this issue right now. Did you get it resolved?

Yes. See the previous reply from mujizac.
12-02-2019 08:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bardentech Offline
Junior Member
**

Posts: 2
Joined: May 2019
Reputation: 0
Post: #8
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(12-02-2019 08:26 PM)kenhoosen Wrote:  
(12-02-2019 06:22 PM)bardentech Wrote:  
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

I'm having this issue right now. Did you get it resolved?

Yes. See the previous reply from mujizac.

I did see that. However, that solution didn't work for me. As it turns out, 3cx was downgrading the firmware back to 66.83.0.55 after I manually updated it to 66.84.0.35. I had to first use 3cx to upgrade the firmware, which it wouldn't do but it would provision it to receive it after the 84.0.35 upgrade was manually done.
12-02-2019 08:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kenhoosen Offline
Junior Member
**

Posts: 6
Joined: Aug 2017
Reputation: 0
Post: #9
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(12-02-2019 08:31 PM)bardentech Wrote:  
(12-02-2019 08:26 PM)kenhoosen Wrote:  
(12-02-2019 06:22 PM)bardentech Wrote:  
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

I'm having this issue right now. Did you get it resolved?

Yes. See the previous reply from mujizac.

I did see that. However, that solution didn't work for me. As it turns out, 3cx was downgrading the firmware back to 66.83.0.55 after I manually updated it to 66.84.0.35. I had to first use 3cx to upgrade the firmware, which it wouldn't do but it would provision it to receive it after the 84.0.35 upgrade was manually done.

I would try the following in order:
1) Remove the phone from the extension within 3CX (so 3CX does not try to automatically provision the phone).
2) Do a factory reset of the phone (by holding down the OK button for a few seconds, and then the display will appear warning "Reset to Factory", press OK again to confirm the reset.)
3) Manually load the 66.84.0.35 firmware.
4) Update to whatever firmware version you are trying to go to.
5) Add the phone to the extension and re-provision.
12-02-2019 09:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 509 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  SIP-T46G Need firmware update instructions RobbyK 2 967 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,341 11-23-2023 06:45 PM
Last Post: Darsh
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,799 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,006 05-05-2023 08:07 PM
Last Post: complex1
  T48U Custom Firmware Upgrade to Official Friendly 0 1,926 03-29-2023 01:20 AM
Last Post: Friendly
  Yealink T41S firmware kosif 0 1,946 12-19-2022 08:52 AM
Last Post: kosif
  T46S will not upgrade 79schultz 1 2,298 10-12-2022 03:11 AM
Last Post: complex1
  T42S unable to update firmware brianstoiber 6 7,755 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 7,385 02-19-2022 03:09 AM
Last Post: dangmoss

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication