[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Action URI in W52P
Author Message
RRC_Support Offline
Junior Member
**

Posts: 2
Joined: Nov 2017
Reputation: 0
Post: #1
Action URI in W52P
Hi Team!
Is there any possibility in W52P of external control of equipment via http requests - like this is implemented in T21 and others.

In the web interface there is no way to configure allowed addresses. Via provisioning cfg too..
10-03-2019 08:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1711612242218
Unregistered

 
Post: #2
RE: Action URI in W52P
(10-03-2019 08:48 PM)RRC_Support Wrote:  Hi Team!
Is there any possibility in W52P of external control of equipment via http requests - like this is implemented in T21 and others.

In the web interface there is no way to configure allowed addresses. Via provisioning cfg too..

Dear Customer

Good day. This is Garry from Yealink Technical Support Team. Nice to know you.

Our W52P does not support "remote control". You can configure the phone only through the W52H UI, or through the Base web side or by using Auto provision.

If you want to log into the W52P web side, you need to register W52H to Base first. Then you can press the "Paging" button on Base to display the IP address on W52H or check the IP address on the registration handle and then use the IP address to go to the Base page and configure the phone.

If you need an Auto provision configuration, you can follow T21's Auto provision deployment.

In the attachment, I have sent you the user guide and administrator guide of W52P. Meanwhile, you can enter the official website of W52P for more information through the link below.
http://support.yealink.com/documentFront...umentId=25

Any upgrade, please let me know.

Best Regards
Garry


Attached File(s)
.pdf  Yealink_W52P_User_Guide_V81_12 (1).pdf (Size: 2.64 MB / Downloads: 1)
10-22-2019 01:27 PM
     Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 514 01-22-2024 07:15 PM
Last Post: complex1
Sad W52P not picking up IP Burkni 4 4,162 09-19-2023 06:22 PM
Last Post: Burkni
  W56H with W52P Base dmvcomms 7 7,404 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,805 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,653 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,340 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 6,947 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 17,336 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Is there no call history in web management panel in W52P? poznaniak 1 7,654 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 9,550 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication