[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Phone reboots and pauses on Initializing when PC port is used.
Author Message
gleblond Offline
Junior Member
**

Posts: 2
Joined: Aug 2019
Reputation: 0
Post: #1
Phone reboots and pauses on Initializing when PC port is used.
SIP-T42G 29.83.0.50

The phone is manually provisioned and has been working steadily for a while. Now the phone is rebooting and getting stuck on "Initializing" when PC port is being utilized. Multiple computers checked and the same issue is presenting itself as soon as the port gets connected.

Attempted firmware upgrade but this had no effect on the issue. Enabled network span to PC port but the phone exhibits the same behavior.

Any additional troubleshooting steps that can be recommended? There are no VLANs on the network and VLANs are not enabled on either port in the phone.
(This post was last modified: 08-12-2019 06:42 PM by gleblond.)
08-12-2019 06:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1711612242218
Unregistered

 
Post: #2
RE: Phone reboots and pauses on Initializing when PC port is used.
Dear Customer

Good day. This is Phil from Yealink Technical Support Team,nice to meet you.

1、May I know that if you donn't used PC Port ,the phone can working fine?
2、May I know which way you power the phone ?POE or adapter?
It may be caused by insufficient power consumption ,Please make sure you can provide sufficient power. Adapter (DC 5V/1.2A),POE(2.1-3.9W).


Any queries, please feel free to let me know. Thanks.
Best Regards,
Phil Lin
08-13-2019 09:49 AM
     Quote this message in a reply
gleblond Offline
Junior Member
**

Posts: 2
Joined: Aug 2019
Reputation: 0
Post: #3
RE: Phone reboots and pauses on Initializing when PC port is used.
(08-13-2019 09:49 AM)Phil_Yealink Wrote:  Dear Customer

Good day. This is Phil from Yealink Technical Support Team,nice to meet you.

1、May I know that if you donn't used PC Port ,the phone can working fine?
2、May I know which way you power the phone ?POE or adapter?
It may be caused by insufficient power consumption ,Please make sure you can provide sufficient power. Adapter (DC 5V/1.2A),POE(2.1-3.9W).


Any queries, please feel free to let me know. Thanks.
Best Regards,
Phil Lin

Hi there, thank you for your response

The phone works fine without anything connected to the PC port. I am checking on how the user is powering the phone now and will have them try a known working adapter.
08-13-2019 01:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
PCnet_Support Offline
Junior Member
**

Posts: 1
Joined: Oct 2018
Reputation: 0
Post: #4
RE: Phone reboots and pauses on Initializing when PC port is used.
(08-12-2019 06:41 PM)gleblond Wrote:  SIP-T42G 29.83.0.50

The phone is manually provisioned and has been working steadily for a while. Now the phone is rebooting and getting stuck on "Initializing" when PC port is being utilized. Multiple computers checked and the same issue is presenting itself as soon as the port gets connected.

Attempted firmware upgrade but this had no effect on the issue. Enabled network span to PC port but the phone exhibits the same behavior.

Any additional troubleshooting steps that can be recommended? There are no VLANs on the network and VLANs are not enabled on either port in the phone.

(09-06-2021 09:34 PM)PCnet_Support Wrote:  
(08-12-2019 06:41 PM)gleblond Wrote:  SIP-T42G 29.83.0.50

The phone is manually provisioned and has been working steadily for a while. Now the phone is rebooting and getting stuck on "Initializing" when PC port is being utilized. Multiple computers checked and the same issue is presenting itself as soon as the port gets connected.

Attempted firmware upgrade but this had no effect on the issue. Enabled network span to PC port but the phone exhibits the same behavior.

Any additional troubleshooting steps that can be recommended? There are no VLANs on the network and VLANs are not enabled on either port in the phone.
Did you ever find a solution to this? We are having the same issue with T29s.
(This post was last modified: 09-06-2021 09:36 PM by PCnet_Support.)
09-06-2021 09:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gyegavian Offline
Junior Member
**

Posts: 47
Joined: Sep 2014
Reputation: 0
Post: #5
RE: Phone reboots and pauses on Initializing when PC port is used.
I am having similar issue with T29G also?
10-26-2021 03:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S Phone doesn't ring - straight to VM - Need it to ring cobregon 0 212 03-07-2024 03:52 AM
Last Post: cobregon
  T46s Veriizon as LAN only phone? Desertfabworks 0 694 08-21-2023 11:31 PM
Last Post: Desertfabworks
  Directory - Remote Phone Book XML Format Cloud9phone 4 17,833 07-28-2023 02:35 AM
Last Post: digiaustin
  Utility to sync outlook contacts with T4x phone tsukraw 4 19,599 07-08-2023 08:16 AM
Last Post: ziksk8
  T46G Multiple EXT Port amandah 2 1,975 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
  Speed Dial to a specific phone? prestigefac 0 1,109 02-06-2023 12:11 AM
Last Post: prestigefac
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 11,552 01-02-2023 01:30 AM
Last Post: kw160008
  Does T4XU supports DD Phone Feature? kevinschlemmer 0 1,315 12-06-2022 10:48 PM
Last Post: kevinschlemmer
  Yealink T42G Phone stuck at Welcome LFC 12 30,272 08-08-2022 04:16 PM
Last Post: markvdheijden
  How to show caller Phone Number when call is forwarded gijoe 0 2,022 05-31-2022 07:40 PM
Last Post: gijoe

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication