[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
V84 feature blf.enhanced
Author Message
brourk Offline
Junior Member
**

Posts: 11
Joined: Nov 2013
Reputation: 0
Post: #1
V84 feature blf.enhanced
Can someone explain and give examples for the blf.enhanced.idle and blf.enhanced.talking features.

Please correct me if I misunderstand how these work. Is it possible to have blf keys perform different actions depending on the blf user's status ?

For example could I have a blf key for a user call that user (as it does now, by dialing the ext number) and also have it transfer a caller to that users voice mail when the user is talking (by dialing a prefix and then the ext number, such as **ext) ?

Also the admin guide mentions using macro strings, but I don't see a macro string that would dial the blf keys value.
07-25-2019 01:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Simons_Yealink Offline
Junior Member
**

Posts: 21
Joined: Jan 2018
Reputation: 0
Post: #2
RE: V84 feature blf.enhanced
(07-25-2019 01:51 PM)brourk Wrote:  Can someone explain and give examples for the blf.enhanced.idle and blf.enhanced.talking features.

Please correct me if I misunderstand how these work. Is it possible to have blf keys perform different actions depending on the blf user's status ?

For example could I have a blf key for a user call that user (as it does now, by dialing the ext number) and also have it transfer a caller to that users voice mail when the user is talking (by dialing a prefix and then the ext number, such as **ext) ?

Also the admin guide mentions using macro strings, but I don't see a macro string that would dial the blf keys value.


Hi

This is Simons from Yealink.
The configurations is able to define the behaviour of BLF button when the phone is with specific status.

For the value of the parameters, you can refer to the Enhanced Dsskey guide you are able to get from the following link.

http://download.support.yealink.com/down...5wNmuV27dZ


Best Regards,
Simons
08-05-2019 09:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #3
RE: V84 feature blf.enhanced
(07-25-2019 01:51 PM)brourk Wrote:  Can someone explain and give examples for the blf.enhanced.idle and blf.enhanced.talking features.

Please correct me if I misunderstand how these work. Is it possible to have blf keys perform different actions depending on the blf user's status ?

Short answer is no, blf.enhanced does not let you do that. All the feature does is allow you to customize the colour/display pattern of BLF lights for those extra states, assuming the phone you are monitoring is capable of passing the state information properly.

So for example, using blf.enhanced.idle = 1 you then need to set blf.enhanced.idle.led = YYYYY

where YYYYY is an LED pattern as described in the documentation Simons mentions. For example "$LEDg1000o$" would make the LED glow green for 1000ms then go off.
08-07-2019 07:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oregon Offline
Junior Member
**

Posts: 7
Joined: Mar 2018
Reputation: 0
Post: #4
RE: V84 feature blf.enhanced
Hi,

I"m trying to use this feature to keep the monitored BLF light from flashing red on incoming calls for that BLF.



I'm using the following:

blf.enhanced.callin.enable="1"
blf.enhanced.callin.led="0"

It does keep the light from flashing, except my own phone is trying to dial 0 when that user gets a call. How do I prevent that and keep the BLF light from flashing on incoming calls?

Thanks!
(This post was last modified: 10-03-2019 08:57 PM by Oregon.)
10-03-2019 07:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Oregon Offline
Junior Member
**

Posts: 7
Joined: Mar 2018
Reputation: 0
Post: #5
RE: V84 feature blf.enhanced
Following up my own post with positive results in case anyone else needs this.

blf.enhanced.callin.enable="1"
blf.enhanced.callin.led="$LEDo$"

This will keep the BLF you're monitoring from not blinking when that phone is ringing.

(10-03-2019 07:07 PM)Oregon Wrote:  Hi,

I"m trying to use this feature to keep the monitored BLF light from flashing red on incoming calls for that BLF.



I'm using the following:

blf.enhanced.callin.enable="1"
blf.enhanced.callin.led="0"

It does keep the light from flashing, except my own phone is trying to dial 0 when that user gets a call. How do I prevent that and keep the BLF light from flashing on incoming calls?

Thanks!
10-04-2019 12:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Enhanced DSS keys tvanvickle 0 2,855 02-19-2021 03:25 AM
Last Post: tvanvickle
  CP960 with SFB protect Basic and Feature settings geislinger 2 7,256 08-12-2019 01:15 PM
Last Post: geislinger
  Which RFC describes as-feature-event event package ? oliv 3 12,902 01-16-2019 04:45 PM
Last Post: jolouis
  What is PCAP type enhanced on V83 avayax 1 6,241 03-19-2018 03:49 PM
Last Post: Aishion_Yealink
  How to disable the Dial-Upon-Lift feature Jeremy17 1 7,069 12-11-2017 01:33 AM
Last Post: Evan_Yealink
  Request: Allow "Enhanced DSS Keys" in Remote Phonebook Jeremy17 1 6,656 11-16-2017 08:40 PM
Last Post: Jeremy17
  Network Conference feature Sur 11 21,177 11-07-2017 07:25 AM
Last Post: Sur
  Autoanswer on click to dial feature Walter 8 26,258 05-04-2016 05:42 AM
Last Post: jmoore
  Broadsoft xsi feature Alka 14 44,050 12-04-2015 03:42 PM
Last Post: RonaldoRoss
  Disable Auto Answer Feature? sexy-trousers 2 12,304 11-07-2015 12:33 PM
Last Post: DeniseOlea

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication