Log in

jjesson0503 · 08-18-2015 11:09 PM

Hi,

I've tried to configure a T26P using the latest firmware with OpenVPN. I've used the same configuration with a T23G and it works perfectly. Does anyone have an example of an OpenVPN config that works on a T26P? I've tried the Yealink support document but that configuration doesn't work.

Thanks

***Yealink_Michael*** · 08-19-2015 05:55 AM

hi

which firmware you are using with T26?

please upgrade to the newest firmware 6.73.0.50, then it can use the same Open VPN file as T23G.

firmware download link : http://support.yealink.com/attachmentDow...3.0.50.zip

please do a factory reset after upgrade is finished

jjesson0503 · 08-21-2015 04:27 PM

Hi,

I've tried that but unfortunately it didn't work. The same tarball works on a T23G but not on the T26P.

Thanks

James

***James_Yealink*** · 08-22-2015 11:23 AM

Hello,

Do you use SHA256? It's only supported in V80 firmware.
T26P don't support it.

Regards,

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	No IP address for W60 but T42 working ok	heathb	2	4,048	03-09-2022 05:11 PM Last Post: complex1
	Passing only LDAP traffic through OPENVPN	Commensus	0	2,038	02-23-2022 09:47 PM Last Post: Commensus
	Configuring OPENVPN with Yealink	Commensus	0	2,545	02-23-2022 09:45 PM Last Post: Commensus
	DHCP not working on T26P when OpenVPN is enabled.	LandonL	11	36,280	05-12-2021 10:46 AM Last Post: 1sae
	MWI not working with Fritzbox	frappy	0	3,962	10-05-2020 08:34 PM Last Post: frappy
	Solved Openvpn.tar creating the right size file	compsos	3	8,357	08-20-2020 06:49 AM Last Post: complex1
	OpenVPN and QoS/TOS	roelvanmeer	0	4,602	02-19-2019 09:27 AM Last Post: roelvanmeer
	OpenVPN Timeout connecting	p2xt	3	10,175	07-13-2018 07:37 PM Last Post: jolouis
	openvpn w52p setup	rafael	4	19,164	08-10-2017 02:03 PM Last Post: indicato
	can't setup openvpn with t48g	zzz	8	24,401	07-18-2017 09:04 AM Last Post: sj

Threaded Mode \| Linear Mode OpenVPN not working on T26P
Author	Message