[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Two account on Yealink T46S
Author Message
f.barbier Offline
Junior Member
**

Posts: 1
Joined: Jun 2019
Reputation: 0
Post: #1
Two account on Yealink T46S
Hi, I found a way to provision two account in the yealink template... See Below,

##Account2 Basic Settings
## X ranges from 1 to 6;
##account.X.enable =

account.2.enable = 1
account.2.label = %%extension_first_name%% %%extension_last_name%%
account.2.alert_info_url_enable = 0
account.2.display_name = %%extension_first_name%% %%extension_last_name%%
account.2.auth_name = abc123dE45
account.2.password = ABC123De45
account.2.user_name = 0001
account.2.sip_server_host = %%param::pbxpublicip%%
account.2.sip_server_port = %%param::sipport%%
account.2.outbound_proxy_enable =
account.2.outbound_host =
account.2.outbound_port =
account.2.sip_listen_port =


#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
account.2.transport = 0


The three phone are configured in a 3CX phone system, manually (with the WebGUI) cause the codes above don't seems to work for the moment.

It is realy important!! it's a request from one of my client.


It is possible to make the phone ring when the second account receive a call over the first, even if there is a call in or if there are calls in the queue?
(not just ringing in the ears but really the device ... In other words, at the old-fashionned way. My client had a Toshiba phone sys before and it was doing it.)


My client is a medical clinic. And there is an emergency line that local hospital call if they want to talk to a doctor in this clinic AND its an emmergency line.

I have programmed an inbound rule that sends it directly to the extension 111 when you dial the emergency phone number.


To be sure to get the attention of receptionists, my client asks me to program the device to ring if the emergency line receive a call even if the receptionist is online.


For example, I programmed two extensions (284 and 111) on the same device.


284 is an agent extension.

111 is a redirection extension.


(on the phone dsskey)

linekey1 = 284

linekey2= 284

linekey3= 111

...


So, if I am on a call on the extension 284 and I receive a call on the second line (so on ext 111) I would like the device to ring over the call.

For now we only hear a small beep and the '' linekey3 '' button is blinking saying there is a call on the second line (on the ext. 111) but my client wants it to ring, with another ringtone (ex. ring4.wav) over the current call.

I tried to do a "RG" but since the receptionists all have a queue, the "RG" do not even happen it falls directly into the "destination if no answer"

(sorry for the bad english and expressions, I'm from Quebec and french lol)
06-07-2019 05:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: Two account on Yealink T46S
(06-07-2019 05:15 PM)f.barbier Wrote:  To be sure to get the attention of receptionists, my client asks me to program the device to ring if the emergency line receive a call even if the receptionist is online.

Short answer is no, you cannot make the phone audibly ring while user is talking on another call. It has been discussed many times in the past the the conclusion was the hardware was never designed to accommodate that so there is no change Yealink can make in firmware to do it.

Yes, old key systems could do that, but those were the days when the ring was a dedicated ringer circuit and on Yealinks the audio for ringing is just a sound file that gets played back over speak phone. Same audio output handles speakerphone and handset, it is just routed different. So you cannot be speaking on the phone, and have something different playing on the speakerphone (i.e. a ringing tone). Seems like a silly limitation but it is what it is.

Best option would be to add a second "emergency phone" beside the main reception one. The basic sets are reasonably priced and solve the problem with minimal effort. Not ideal of course but it's that or add an external ringer device (like an Algo).
06-10-2019 02:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S. User hear the customer when he's on wait o.fraiture 1 277 03-12-2024 07:19 PM
Last Post: complex1
  Unknown Icon in T46S kadinter 3 5,483 03-09-2024 06:25 AM
Last Post: MossyTel_Support
  T46S Phone doesn't ring - straight to VM - Need it to ring cobregon 0 212 03-07-2024 03:52 AM
Last Post: cobregon
  Yealink T46U - OpenVPN to MikroTik Router isaiahsiewert 0 434 01-19-2024 12:04 AM
Last Post: isaiahsiewert
  not able to get sip and account related details using action uri rajat_asthana 0 550 12-26-2023 03:51 PM
Last Post: rajat_asthana
  Remove transfer dialog on T46S bsnipes 0 515 12-05-2023 04:44 AM
Last Post: bsnipes
  Connect Yealink T46U to FreePBX system via Synology Site to Site VPN TF2023 0 750 10-10-2023 11:48 PM
Last Post: TF2023
  No dialtone - T46S, EHS36, Sennheiser headset Huleboer 0 1,912 09-28-2023 05:49 PM
Last Post: Huleboer
  T46S Locked HornetSoft 0 964 09-11-2023 05:04 PM
Last Post: HornetSoft
  Key pad speed dial FAILS from non-default account jseeley 1 981 09-08-2023 05:56 AM
Last Post: jseeley

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication