[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Create conference with 2 existing calls
Author Message
chrischevy Offline
Junior Member
**

Posts: 25
Joined: Nov 2014
Reputation: 0
Post: #1
Create conference with 2 existing calls
I know how to create a conference by calling Person A, press Conference, call Person B and press Conference again.

However, this scenario is not good all the time. Let's say I receive 2 calls, and I need to create a conference, I can't do it...

How can I create a conference by merging 2 existing calls without pressing conference before placing the second call ?

Not sure if I'm clear

I found these instructions but they don't work (there is no "Send" or "Select" button at step 4). I just keep switching between calls

Joining Two Calls in a Conference
You can select a hold call to join into a conference call with the active call.
Procedure
1. Place two or more calls using the same or different accounts on the phone.
2. Select the desired call for conference and ensure that the call is active.
3. Press Conference (Conf).
4. Select a desired hold call, and then press Send.
On the SIP-T48S/T48G IP phone, tap the desired hold call from the left sidebar.
On the SIP-T42S/T42G/T41S/T41P/T40P/T40G IP phone, press Select.
The active call and the selected hold call are joined into a conference. If there are multiple hold calls, the other hold
calls on the same or different accounts remain hold
05-23-2019 02:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 127
Joined: Mar 2017
Reputation: 0
Post: #2
RE: Create conference with 2 existing calls
Hi Dear friend,

This is Evan from Yealink Support Team, nice to know you here!

I tested locally, it worked.
For example:
1. Phone A calls Phones B, and Phone B picks-up this call;
2. Then Phone B holds Phone A, and make a new call C, next, C picks-up this call.
3. The phone A press "Conf" key to conference these calls.
4. Then select this held call A, then press send to create the conference.

Please create a new ticket to us if any other questions. Now, we support in ticket system.
Ticket system: http://ticket.yealink.com

Best Regards,
Evan You
05-24-2019 08:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Distinctive Ringtones for Internal Calls harrys 0 567 07-10-2022 09:03 PM
Last Post: harrys
  ghost calls to cid:XXXXX bfcoi974 8 2,778 06-21-2022 07:37 PM
Last Post: bfcoi974
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 3,276 05-12-2022 05:41 PM
Last Post: rtfm2022
  T48s - Missed calls Bernhard77 0 2,314 01-28-2021 04:10 PM
Last Post: Bernhard77
  t46s calls on hold operation comstar 7 11,442 09-22-2020 06:27 PM
Last Post: Yisroel_MongoTEL
  Conference Bridge Issue with # TampaVoip 3 4,748 09-15-2020 05:20 PM
Last Post: complex1
  Local and Remote phonebooks pause and code (conference bridges) AndyInNJ 0 2,314 04-03-2020 06:02 PM
Last Post: AndyInNJ
  Join 2 calls ccwtech 4 6,485 03-02-2020 03:44 PM
Last Post: ccwtech
  Outgoing Calls only works with 10 digit dial - Skype for Business jvoros 1 4,891 01-15-2020 04:03 PM
Last Post: bpodulka
  Yealink T48, Mutiple lines - Deny incomming calls. mojoJED 1 3,594 11-13-2019 09:22 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication