[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T54W with Plantronics Savi720 via USB
Author Message
guyst77 Offline
Junior Member
**

Posts: 1
Joined: Nov 2015
Reputation: 0
Post: #1
T54W with Plantronics Savi720 via USB
Hello Yealink Team,

I'va a problem with the new T5x Series and the EHS function with wireless headsets(testing with Plantronics Savi720 and Jabra Pro930 via USB).

There is no ringing in the headset at an incomming call and I can't accept the call directly on the headset.

The datasheet specifies the operation of wired and wireless headsets. But there is no information about the EHS-function.

Does it supported via USB or not?

Testing with T54W(FW. 96.84.0.20 and 96.84.0.30).

Best regards
Guy
04-11-2019 08:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ipcsolutions Offline
Member
***

Posts: 57
Joined: Jun 2015
Reputation: 2
Post: #2
RE: T54W with Plantronics Savi720 via USB
Yes we are having the same problem with Sennheiser D10 USB.
Very annoying!
11-17-2019 11:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
testlabuser2015 Offline
Junior Member
**

Posts: 8
Joined: Dec 2015
Reputation: 0
Post: #3
RE: T54W with Plantronics Savi720 via USB
guyst77,

Depending on whether you use a PC or MAC, you will need to install the Plantronics Hub Software.
Below are the links and instructions.
From within the phones WebUI, go to Features > Audio > Ringer Device for Headset >> set to "Use Speaker & Headset" < this is the setting from the phone that will send the ringing alert tone through to the headset.

The reason for the hub software is so that you can set the default pickup/answering device.
While I designed this configuration for use with the Savi 8210/8220, it should should work for all other wireless headsets that have a USB connection option.
Settings for Plantronics Hub PC
1. Download and install the software from this link: https://www.poly.com/us/en/support/downl...ub-desktop
-Scroll down and click on the download option for "WINDOWS"
2. Connect a USB cable from the Plantronics base, to your PC.
3. Install the software. It may ask after the installation is complete, whether you would like it launch.
-If no prompt to launch, locate the icon on your desktop and double click on it or press the "WINDOWS"
key on your keyboard and begin typing "Plantronics", when you see the icon for the app, double click on it.
4. If a notification appears at the top for any updates to the base or headset, allow them to update before proceeding.
5. Click on the Settings menu at the top of the window and then select General.
-Scroll down util you see the option "Default Phone Line"
-Change the value to "PC"
-Scroll back up and click "Apply"
6. Disconnect the USB cable from your PC and connect it to your Deskphone.
7. Contact your $yourcompany and request to have the setting pushed to your phone so that
calls will ring on both your deskphone and your headset.
Note: This configuration should only be considered if Windows based softphone clients will not be utilized.
-The USB connection to the phone


Settings for Plantronics Hub Mac
1. Download and install the software from this link: https://www.poly.com/us/en/support/downl...ub-desktop
-Scroll down and click on the download option for "MAC"
2. Connect a USB cable from the Plantronics base, to your MAC.
3. Install the software. It may ask after the installation is complete, whether you would like it launch.
-If no prompt to launch, click on the "Finder" icon from the Dock, go to Applications.
-Within the Applications section, scroll down until you locate the app icon for Plantronics Hub and double click on it.
4. If a notification appears at the top for any updates to the base or headset, allow them to update before proceeding.
5. Click on the Settings menu at the top of the window and then select General.
-Scroll down util you see the option "Default Phone Line"
-Change the value to "PC"
-Scroll back up and click "Apply"
6. Disconnect the USB cable from your PC and connect it to your Deskphone.
07-01-2021 12:18 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
testlabuser2015 Offline
Junior Member
**

Posts: 8
Joined: Dec 2015
Reputation: 0
Post: #4
RE: T54W with Plantronics Savi720 via USB
Yes, the T5 series devices with USB ports do support USB headsets.

Here are the instructions from a knowledge base article that I wrote for the company I work for.
They are for the Plantronics Savi 8220/8210, but they will work just fine for the Savi 720.
For Jabra, you will need the Jabra Direct software

https://jabraxpressonlineprdstor.blob.co...tSetup.exe
https://jabraxpressonlineprdstor.blob.co...tSetup.dmg

1. Open the Jabra Direct software after installing
2. Click on the Device icon and then click on the device, if more than one, choose the appropriate device.
3. Click on the yellow settings button.
4. Click on USB Desk Phone and enable the following settings, then click save.
-USB desk phone connection.
-Ringtone in headset.

If you followed the steps for the phone and the headset software, you should be able to hear calls ringing
in the headset and be able to control the phone with the applicable controls on the headset.
___________________________________________


Webui: Features > Audio > Ringer Device for Headset
-Options: Speaker, Use Headset, Use Headset & Speaker
Unison customization paramter has been acquired (add to doc).

Settings for Plantronics Hub PC
1. Download and install the software from this link: https://www.poly.com/us/en/support/downl...ub-desktop
-Scroll down and click on the download option for "WINDOWS"
2. Connect a USB cable from the Plantronics base, to your PC.
3. Install the software. It may ask after the installation is complete, whether you would like it launch.
-If no prompt to launch, locate the icon on your desktop and double click on it or press the "WINDOWS"
key on your keyboard and begin typing "Plantronics", when you see the icon for the app, double click on it.
4. If a notification appears at the top for any updates to the base or headset, allow them to update before proceeding.
5. Click on the Settings menu at the top of the window and then select General.
-Scroll down util you see the option "Default Phone Line"
-Change the value to "PC"
-Scroll back up and click "Apply"
6. Disconnect the USB cable from your PC and connect it to your Deskphone.
7. Contact your $yourcompany and request to have the setting pushed to your phone so that
calls will ring on both your deskphone and your headset.
Note: This configuration should only be considered if Windows based softphone clients will not be utilized.
-The USB connection to the phone


Settings for Plantronics Hub Mac
1. Download and install the software from this link: https://www.poly.com/us/en/support/downl...ub-desktop
-Scroll down and click on the download option for "MAC"
2. Connect a USB cable from the Plantronics base, to your MAC.
3. Install the software. It may ask after the installation is complete, whether you would like it launch.
-If no prompt to launch, click on the "Finder" icon from the Dock, go to Applications.
-Within the Applications section, scroll down until you locate the app icon for Plantronics Hub and double click on it.
4. If a notification appears at the top for any updates to the base or headset, allow them to update before proceeding.
5. Click on the Settings menu at the top of the window and then select General.
-Scroll down util you see the option "Default Phone Line"
-Change the value to "PC"
-Scroll back up and click "Apply"
6. Disconnect the USB cable from your PC and connect it to your Deskphone.
7. Contact your $yourcompany and request to have the setting pushed to your phone to allow
calls to ring on both your deskphone and your headset.

Additional Notes:
-This configuration should only be considered if Windows/Mac based softphone clients will not be utilized.
-The volume control on the Poly Savi 8220/8210 will is separate from that of the phone. At this time, there
are no options within the Plantronics Hub software.
-If $yourcompany needs to deply the Plantronics Hub software from a Domain Controller, you will
need to reach reference this link (https://help.plantronicsmanager.com/PMPr...E9E1.html)
and contact Poly for a Plantronics Manager Pro account.

Plantronics Hub software requirements:
-Windows 7, Windows 8.x (Desktop Mode), Windows 10 (Desktop Mode)
-High Sierra (10.13), Mojave (10.14) and Catalina (10.15)
08-08-2021 01:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T54W and EXP50 Josh@nexcomnetworks.com 5 967 03-23-2024 08:38 PM
Last Post: tredd1982
  T54W is not Forwarding Calls larkspurphone 2 835 01-26-2024 02:58 AM
Last Post: larkspurphone
  T54W use with cell number or google voice VELODUDE 1 890 01-05-2024 06:46 AM
Last Post: ITdude87
  T54W does not Record telespex 4 1,367 11-16-2023 09:49 PM
Last Post: complex1
  New T54W phones not seeing wifi Chris708 2 1,572 10-30-2023 05:51 AM
Last Post: Chris708
  T54w firmware versions elin@klhconsulting 3 2,683 10-10-2023 12:40 AM
Last Post: Yisroel_MongoTEL
  T54W display remains black after power saving. mighty-tower 7 3,900 08-28-2023 10:29 PM
Last Post: complex1
  T54W Factory Reset Locked? beamtech 1 1,565 07-29-2023 04:29 PM
Last Post: complex1
  T54W & DD10K USB DECT DONGLE landstartelco 5 5,214 06-09-2023 05:04 AM
Last Post: Yisroel_MongoTEL
  T54w firmware download call central 1 3,622 05-31-2023 05:41 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication