[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Yealink Forums » IP Phone Series » T4x Series » Disable Power LED completely

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Disable Power LED completely
Author Message
mhcsoft Offline
Junior Member
**

Posts: 4
Joined: Jan 2019
Reputation: 0
Post: #1
Disable Power LED completely
Hi,

how to disable the power LED completely? I've set:

phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0

without success. It still blinks at least when there are missed calls.

TIA
03-02-2019 10:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,538
Joined: Jan 2014
Reputation: 47
Post: #2
RE: Disable Power LED completely
(03-02-2019 10:16 AM)mhcsoft Wrote:  Hi,

how to disable the power LED completely? I've set:

phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 0
phone_setting.mute_power_led_flash_enable = 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0

without success. It still blinks at least when there are missed calls.

TIA

Hi,

Please manually disable the Power LED indicator using the Web UI and try again.
(Features > Power LED > and set all fields to “Disabled”)

If this will work then review the provisioning template and check for errors.

Hope this will help.
Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-02-2019 12:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mhcsoft Offline
Junior Member
**

Posts: 4
Joined: Jan 2019
Reputation: 0
Post: #3
RE: Disable Power LED completely
(03-02-2019 12:54 PM)complex1 Wrote:  Hi,

Please manually disable the Power LED indicator using the Web UI and try again.
(Features > Power LED > and set all fields to “Disabled”)

If this will work then review the provisioning template and check for errors.

Hope this will help.

When I look at "Features > Power LED" on a provisioned phone all fields are set to "Disabled".

Did so, provisioning template is identically to mine.
03-02-2019 12:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,538
Joined: Jan 2014
Reputation: 47
Post: #4
RE: Disable Power LED completely
(03-02-2019 12:59 PM)mhcsoft Wrote:  
(03-02-2019 12:54 PM)complex1 Wrote:  Hi,

Please manually disable the Power LED indicator using the Web UI and try again.
(Features > Power LED > and set all fields to “Disabled”)

If this will work then review the provisioning template and check for errors.

Hope this will help.

When I look at "Features > Power LED" on a provisioned phone all fields are set to "Disabled".

Did so, provisioning template is identically to mine.

Hi,

Please tell me what firmware version the phone is running?
Please reset the phone to factory default, re-provisioning the phone and try again.

Hope this will help.
Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-02-2019 01:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mhcsoft Offline
Junior Member
**

Posts: 4
Joined: Jan 2019
Reputation: 0
Post: #5
RE: Disable Power LED completely
(03-02-2019 01:31 PM)complex1 Wrote:  Hi,

Please tell me what firmware version the phone is running?
Please reset the phone to factory default, re-provisioning the phone and try again.

Hope this will help.

I've done factory resets more than once already :-) The problem exists at the following devices for me:

T46G - FW: 28.83.0.50
T46S - FW: 66.84.0.15

TIA
03-02-2019 02:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,538
Joined: Jan 2014
Reputation: 47
Post: #6
RE: Disable Power LED completely
Hi,

As I can not reproduce the problem, I suggest to create a support ticket at Yealink and refer to this thread.
https://ticket.yealink.com/
Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-02-2019 04:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mhcsoft Offline
Junior Member
**

Posts: 4
Joined: Jan 2019
Reputation: 0
Post: #7
RE: Disable Power LED completely
Done: https://ticket.yealink.com/page/question...l?id=82262
03-02-2019 07:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Disable SSL / TLS jakes 2 10,192 06-05-2024 12:27 AM
Last Post: arjun.nagaraja
  Disable X button to reject calls hercross 0 1,249 07-07-2023 04:01 PM
Last Post: hercross
  Send different codes on keystroke (enable and disable) Marsl84 0 1,393 04-21-2023 08:15 PM
Last Post: Marsl84
Information Toggle Power LED or update config via remote? 48design-cg 0 1,532 01-17-2023 05:32 PM
Last Post: 48design-cg
  Disable "recall" transfers Luke Escude 9 27,544 10-29-2021 09:47 PM
Last Post: radartc
  Need to completely reset phones Chris708 1 4,635 02-26-2021 03:58 AM
Last Post: Chris708
  yealink T46g cannot disable lcd screensaver mike702 2 8,856 02-10-2021 04:33 AM
Last Post: jamesbchz
  Feature request - X header, disable missed call DarrenWilliams 0 4,037 10-14-2020 02:52 PM
Last Post: DarrenWilliams
  T4x: Possible to deactivate TLS 1.2 / disable HTTP redirection? Fritz-EDV 5 16,188 06-12-2020 08:13 PM
Last Post: complex1
  Disable SMS/IM Beeping On Handset gflow 1 6,075 02-12-2020 08:31 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication