[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Creating Custom BLF shortcuts
Author Message
intouchcomms Offline
Junior Member
**

Posts: 4
Joined: Aug 2018
Reputation: 0
Post: #1
Creating Custom BLF shortcuts
Hello,

A customer of ours has requested shortcut buttons that will take them straight to the call forwarding page of their Yealink T46S handset (Rather than going to Menu - Features - Call forward - Always forward).

Could anybody advise on how to do this? either through/templates/UAD or BLF.

We are using 3CX (Already asked on the 3cx forums, but we were advised to ask here)

Any help is very much appreciated.
02-21-2019 09:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nickpl Offline
Junior Member
**

Posts: 27
Joined: Apr 2014
Reputation: 0
Post: #2
RE: Creating Custom BLF shortcuts
(02-21-2019 09:32 AM)intouchcomms Wrote:  Hello,

A customer of ours has requested shortcut buttons that will take them straight to the call forwarding page of their Yealink T46S handset (Rather than going to Menu - Features - Call forward - Always forward).

This can be done through the Enhanced DSS Keys feature. You can find more details about it in the Administrator's Guide: Yealink_SIP-T2_Series_T4_Series_T5_Series_CP920_IP_Phones_Administrator_Guide_V84_11.pdf

In the config file for the phones it would look something like:
Code:
features.enhanced_dss_keys.enable = 1
edk.edklist.1.enable = 1
edk.edklist.1.mname = Frwrd
edk.edklist.1.action = $Icall_forward_always_forward$

linekey.12.type = 73
linekey.12.value = !Frwrd
linekey.12.label = AlwaysForward

Hopefully you can add this code to the phone's provisioning templates. I'm not familiar with 3CX so I can't give you step by step directions on that.
(This post was last modified: 02-22-2019 08:40 PM by nickpl.)
02-22-2019 08:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T41P custom logo ausadmin 1 90 05-17-2020 08:21 AM
Last Post: complex1
  Need to remove custom Fonality firmware 1CCT 8 4,457 09-09-2019 07:12 PM
Last Post: Yisroel_MongoTEL
  How do you turn off custom linekey configuration ipcsolutions 2 1,123 01-28-2019 08:21 PM
Last Post: ipcsolutions
  custom ringtone with new BLF feature Chris Barron 0 866 11-07-2018 01:59 PM
Last Post: Chris Barron
  T41S Custom logo only displays temporarily cwacker 8 4,139 10-10-2018 06:20 PM
Last Post: jolouis
  About custom softkey Barry Mdfk 0 1,371 06-19-2018 10:02 AM
Last Post: Barry Mdfk
  T46s / 3CX Custom Template / No Longer Reboots QuicktechCC_Support 2 2,769 11-15-2017 10:24 PM
Last Post: QuicktechCC_Support
  Custom Key to return to DSS Screen RyanM 3 2,389 10-26-2017 01:04 AM
Last Post: Lucia_Yealink
  Problem with Custom Softkeys while Talking jacobj 3 2,589 08-28-2017 05:53 AM
Last Post: Johnson_Yealink
  Multiple T46 Custom Ringtone upload dan.williams@xpedeus.com 3 5,514 10-13-2016 04:20 AM
Last Post: bflorin

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication