[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Getting RTCP-XR session report, no periodic reports
Author Message
aptklassen Offline
Junior Member
**

Posts: 2
Joined: Feb 2019
Reputation: 0
Post: #1
Getting RTCP-XR session report, no periodic reports
I have a Yealink SIP-T48S phone with firmware version 66.82.0.20. I have configured a collector and enabled rtcp-xr reports. I do receive end of call reports on the collector, but I do not get any periodic reports. I do not have thresholds configured, since I do not want events.

I only have one phone, so I do not have a provisioning server. I entered the configuration via the Web interface. I also tried importing a partial configuration file with the phone settings. I know the import worked because I changed a few settings and it was reflected in the configuration. Any ideas about what I might be doing wrong and/or how to trouble shoot?

voice.rtcp_xr.enable=1
phone_setting.vq_rtcpxr_display_symm_oneway_delay.enable=1
phone_setting.vq_rtcpxr_display_round_trip_delay.enable=1
phone_setting.vq_rtcpxr_display_moscq.enable=1
phone_setting.vq_rtcpxr_display_moslq.enable = 1
phone_setting.vq_rtcpxr_display_packets_lost.enable=1
phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable=1
phone_setting.vq_rtcpxr_display_jitter.enable=1
phone_setting.vq_rtcpxr_display_remote_codec.enable=1
phone_setting.vq_rtcpxr_display_local_codec.enable=1
phone_setting.vq_rtcpxr_display_remote_call_id.enable=1
phone_setting.vq_rtcpxr_display_local_call_id.enable=1
phone_setting.vq_rtcpxr_display_stop_time.enable=1
phone_setting.vq_rtcpxr_display_start_time.enable=1
phone_setting.vq_rtcpxr_interval_period=10
phone_setting.vq_rtcpxr.interval_report.enable=1
phone_setting.vq_rtcpxr.states_show_on_web.enable=1
phone_setting.vq_rtcpxr.session_report.enable=1

Thanks, Andrew
02-06-2019 12:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 127
Joined: Mar 2017
Reputation: 0
Post: #2
RE: Getting RTCP-XR session report, no periodic reports
Hi Sir,

Your configurations are correct. After ending the call, you can refresh the RTP status on web UI -- Status -- RTP status, then it will show the call reports.

May I know what does you mean about " periodic reports"?

Best Regards,
Evan You
07-12-2019 08:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
aptklassen Offline
Junior Member
**

Posts: 2
Joined: Feb 2019
Reputation: 0
Post: #3
RE: Getting RTCP-XR session report, no periodic reports
I mean interval reports. I have enabled interval reports via this setting:
phone_setting.vq_rtcpxr.interval_report.enable=1

But I only receive end of call reports. Is this feature only supported on
certain phones and/or software revisions?

(07-12-2019 08:11 AM)Evan_Yealink Wrote:  Hi Sir,

Your configurations are correct. After ending the call, you can refresh the RTP status on web UI -- Status -- RTP status, then it will show the call reports.

May I know what does you mean about " periodic reports"?

Best Regards,
Evan You
07-12-2019 01:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Evan_Yealink Offline
Administrator
*******

Posts: 127
Joined: Mar 2017
Reputation: 0
Post: #4
RE: Getting RTCP-XR session report, no periodic reports
Hi Sir,

Thanks for your explaination. Please use below new FW for testing, we fixed a similar RTCP-XR report issue on it.

https://drive.google.com/open?id=1V0R9MI...kpdf3FgT-C

If the new FW doesn't help, please reproduce this issue and offer us the complete diagnosis files, then we can see what is happening here. Below is the FAQ about how to capture diagnosis files.
http://support.yealink.com/faq/faqInfo?id=707

Best Regards,
Evan U
07-14-2019 05:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bitblock Offline
Junior Member
**

Posts: 22
Joined: Mar 2018
Reputation: 0
Post: #5
RE: Getting RTCP-XR session report, no periodic reports
Hi Evan U
On the T29, I upgrade to 46.83.0.120
Periodic reports still do not work.
Can you help?
Thank you
02-18-2021 05:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Backlight lights up based on SIP session expire CFortC 6 9,530 09-11-2020 01:29 PM
Last Post: CFortC
  Bug Report: VPN no longer functions with firmware 29.83.x.x KNERD 2 6,265 08-28-2018 08:21 AM
Last Post: avayax
  3CX Session Border Controller FastflowPipeline 1 6,649 09-14-2016 07:39 PM
Last Post: rgwilliams20
  Probelm with RTCP-XR amendiola 3 8,893 12-01-2015 09:01 PM
Last Post: amendiola

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication