[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firewall Settings for Auto Provisioning
Author Message
ChristophWHAT Offline
Junior Member
**

Posts: 2
Joined: Mar 2017
Reputation: 0
Post: #1
Firewall Settings for Auto Provisioning
Hello,

I have a question regarding the Yealink Redirection Server.

We are using Yealink T46G / T46P phones.

We have very strict firewall settings, and the autoprovisioning for Yealink isn't working.

If I use the mass deployment link (from VoIP provider) and autoprovision manually it works and the phones connect to tftp and pull the firmware+config files.

I couldn't find the address of the redirection server from Yealink in all the manuals.
What is the port and IP adress that the Yealink phone connects on startup? Is there a firewall configuration manual for Yealink?

Best regards,
Christoph
01-30-2019 08:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: Firewall Settings for Auto Provisioning
According to the email I got from Yealink when they did the recent RPS conversion (September 2018):

Quote:To avoid any service disruption, please whitelist the following domains and/or IP addresses:

https://dm.yealink.com
https://api-dm.yealink.com
https://rps.yealink.com
52.71.103.102
35.156.148.166
106.15.89.161
47.75.58.202
47.89.187.0

Hopefully that helps? Otherwise just do a packet trace on a Yealink phone when you power it on; should be pretty obvious.[/quote]
01-30-2019 10:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ChristophWHAT Offline
Junior Member
**

Posts: 2
Joined: Mar 2017
Reputation: 0
Post: #3
RE: Firewall Settings for Auto Provisioning
Thank you, great response, these settings work! CoolIdea
02-04-2019 12:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ISRG Root X1 cert not recognized by phone during auto provision chrisduncansb 2 792 05-21-2024 01:23 PM
Last Post: rlaager
  Auto Provision Wall Paper Stopped Working TRP Tech 5 10,472 02-19-2024 12:02 AM
Last Post: jamesalan
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 0 2,152 10-12-2023 05:49 PM
Last Post: Andi_Dee
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 2,070 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 3,617 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 6,603 04-12-2023 05:32 PM
Last Post: aaronmedina
  Remote Phonebook settings lost.. bluetba 0 1,545 02-23-2023 07:52 PM
Last Post: bluetba
  account.X provisioning vieri 7 6,354 02-10-2023 07:02 PM
Last Post: vieri
  Yealink T54W Auto Provision not working h.cmc 1 4,368 12-09-2022 08:31 PM
Last Post: complex1
  T46U Not Contacting Provisioning Server 88fingerslukee 0 2,406 09-06-2022 11:43 PM
Last Post: 88fingerslukee

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication