[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
G722 not working on W53H W60B
Author Message
ricvil Offline
Junior Member
**

Posts: 12
Joined: Oct 2013
Reputation: 0
Post: #1
G722 not working on W53H W60B
Hi,

I swapped a W52 system for a W53 (W53H plus W60B). Identical config and same Asterisk server. I was using G722 exclusively before (all other codecs disabled) and it worked great with the Yealink phones. The new base does not seem to work with G722. I can confirm the SIP signalling is fine. Phone sends the INVITE with G722 as the codec and Asterisk connects the call. As soon as the SIP 200 OK is send back to the W60B, the call drops. It is as if the W60B chokes as soon as it tries to decode G722 audio. Base FW is 77.83.0.20, handset FW is 88.83.0.10.

Any ideas?

Thanks,
Ricardo
01-12-2019 04:04 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 43
Post: #2
RE: G722 not working on W53H W60B
Hi Ricardo,

Please upgrade the Base to f/w 77.83.0.25, then reset the base to factory default and try again.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-13-2019 12:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ricvil Offline
Junior Member
**

Posts: 12
Joined: Oct 2013
Reputation: 0
Post: #3
RE: G722 not working on W53H W60B
Did the upgrade and factory default but the issue continues.

Invite from Yealink to Asterisk has the below codec offer (G722 only):

User-Agent: Yealink W60B 77.83.0.25.
Allow-Events: talk,hold,conference,refer,check-sync.
Supported: replaces.
Content-Length: 213.
.
v=0.
o=- 20007 20007 IN IP4 192.168.4.2.
s=SDP data.
c=IN IP4 192.168.4.2.
t=0 0.
m=audio 12452 RTP/AVP 103 101.
a=rtpmap:103 G722/8000.

Asterisk accepts codec and connects call:
SIP/2.0 200 OK.
.
.
v=0.
o=root 184010779 184010779 IN IP4 192.168.4.1.
s=Asterisk PBX 1.8.23.1.
c=IN IP4 192.168.4.1.
t=0 0.
m=audio 14268 RTP/AVP 103 101.
a=rtpmap:103 G722/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-16.

The yealink immediately sends a BYE back to Asterisk and the LCD screen on the W53H says "Not Acceptable".

To me this means a codec problem and given the same setup works fine with the W52, I am still inclined to blame the W53.

Thanks.
01-15-2019 09:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to enable web server/ GUI on W60B and W70B after provisioning has disabled it. jhofford 2 1,882 09-12-2023 08:42 PM
Last Post: jhofford
  Problems setting up W60B and interface issues Ness 4 4,659 03-30-2023 05:24 PM
Last Post: Ness
  Auto Provision firmware on W60B base station hospitale 6 5,441 02-15-2023 05:54 PM
Last Post: hospitale
  recovery mode W60B files Aleskey 3 5,146 02-14-2023 01:42 AM
Last Post: 88fingerslukee
  W60B Constantly Restarts When W73H Is Connected. nolto 0 1,479 02-07-2023 12:15 AM
Last Post: nolto
  W60B factory reset and default login carsey 3 5,151 02-01-2023 02:52 AM
Last Post: complex1
  W60B remove intercom when transfert MYCOMPUTING 2 2,466 12-08-2022 12:17 AM
Last Post: complex1
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 3 8,546 12-01-2022 03:15 AM
Last Post: therring
  W60B emitting high-pitched noise msncookie 6 11,555 09-19-2022 08:39 PM
Last Post: RobFromSouthJersey
  ‘New’ W56/W60B default admin password not recognised? Russ1 2 6,102 08-07-2022 02:44 PM
Last Post: Russ1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication