[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Caller ID Transffering
Author Message
Spyder13337 Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #1
Caller ID Transffering
Good Morning,

i have a Yealink t52s

when i recived an inbound call i need to transfer that call but i need ti show caller ID of the originating caller not mine but

my yea link firmware is

Firmware Version 70.84.0.10
Hardware Version 74.0.0.0.0.0.0

i am testing on elastix 4.0 and asterisk 11.25.3

i have the trustrpid = yes
and sendrpid = i tried both send p=asserted and send remote party ID

and set up pai-prid-from on the yealink

but still no luck

any help much appreciated


Attached File(s) Thumbnail(s)
       
10-04-2018 03:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: Caller ID Transffering
What kind of transfer are you doing?

In order to pass callerID normally you usually need to do a blind transfer. If you do an attended the caller will see your caller ID first (since you are making the call initially), and the on screen display should update once you actually do the transfer but that depends on both PBX configuration and RPID support.

Make sure you are doing a blind transfer first and see if that works. Then from there you can refine further as needed.
10-05-2018 08:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Spyder13337 Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #3
RE: Caller ID Transffering
Blind Transfer Works that not an issue is the attended transfer that i am having this issue with

(10-05-2018 08:32 PM)jolouis Wrote:  What kind of transfer are you doing?

In order to pass callerID normally you usually need to do a blind transfer. If you do an attended the caller will see your caller ID first (since you are making the call initially), and the on screen display should update once you actually do the transfer but that depends on both PBX configuration and RPID support.

Make sure you are doing a blind transfer first and see if that works. Then from there you can refine further as needed.
10-06-2018 08:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #4
RE: Caller ID Transffering
(10-06-2018 08:24 PM)Spyder13337 Wrote:  Blind Transfer Works that not an issue is the attended transfer that i am having this issue with

Attended transfers are more tricky. As I mentioned, proper call flow would be:
1) A calls B.
2) B Answers.
3) A wants to talk to C, so
4) B puts A on hold and makes attended transfer call to C.
5) C sees B calling on caller ID, answers and says "yes Give me A".
6) B completes transfer by pressing transfer button again. A is now talking to C.

IN that final step though C will only get to see A's caller ID if your PBX is configured to send Connected Line Information. This is basically a way to tell C that although it was already talking on a call (Call from B), the person actually connected on that call has changed (it's A now), so the display needs to be updated.

FreePBX/Asterisk has included that capability and feature set for a while, but I'm not sure what version Elastix 4 is based on and whether there are any options you need to put in yourself to activate there.
10-10-2018 06:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Spyder13337 Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #5
RE: Caller ID Transffering
OK Asterisk is Version 11.25.13 and elastix is a makeup for free PBX to make is look prettier

do yo know what seeting i need to manipulate in free PBX to accomplished this

(10-10-2018 06:43 PM)jolouis Wrote:  
(10-06-2018 08:24 PM)Spyder13337 Wrote:  Blind Transfer Works that not an issue is the attended transfer that i am having this issue with

Attended transfers are more tricky. As I mentioned, proper call flow would be:
1) A calls B.
2) B Answers.
3) A wants to talk to C, so
4) B puts A on hold and makes attended transfer call to C.
5) C sees B calling on caller ID, answers and says "yes Give me A".
6) B completes transfer by pressing transfer button again. A is now talking to C.

IN that final step though C will only get to see A's caller ID if your PBX is configured to send Connected Line Information. This is basically a way to tell C that although it was already talking on a call (Call from B), the person actually connected on that call has changed (it's A now), so the display needs to be updated.

FreePBX/Asterisk has included that capability and feature set for a while, but I'm not sure what version Elastix 4 is based on and whether there are any options you need to put in yourself to activate there.
10-10-2018 07:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #6
RE: Caller ID Transffering
(10-10-2018 07:12 PM)Spyder13337 Wrote:  OK Asterisk is Version 11.25.13 and elastix is a makeup for free PBX to make is look prettier

do yo know what seeting i need to manipulate in free PBX to accomplished this

Unfortunately not, I am not an elastix user and they have destroyed/removed all of their old source codes from the web after 3CX "converted them" so no way to even look through and see what's missing. Your best bet would be to either get somebody privately to do the dialplan inspection and coding for you, or abandon Elastix and move on to FreePBX directly or some other PBX flavour.

In any case not a Yealink issue at all, so this is probably way off topic now.
10-12-2018 03:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Spyder13337 Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #7
RE: Caller ID Transffering
i have access to FreePBX where do i make thsose changes


(10-12-2018 03:15 PM)jolouis Wrote:  
(10-10-2018 07:12 PM)Spyder13337 Wrote:  OK Asterisk is Version 11.25.13 and elastix is a makeup for free PBX to make is look prettier

do yo know what seeting i need to manipulate in free PBX to accomplished this

Unfortunately not, I am not an elastix user and they have destroyed/removed all of their old source codes from the web after 3CX "converted them" so no way to even look through and see what's missing. Your best bet would be to either get somebody privately to do the dialplan inspection and coding for you, or abandon Elastix and move on to FreePBX directly or some other PBX flavour.

In any case not a Yealink issue at all, so this is probably way off topic now.
10-15-2018 02:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Show local directory name with caller id colcc 0 759 08-24-2023 01:38 PM
Last Post: colcc
  T5XW - Caller ID on Attended Transfer stevemiller 3 2,464 01-27-2023 03:57 AM
Last Post: complex1
  Call park Caller ID JonathanCPI 0 1,501 07-12-2022 03:26 AM
Last Post: JonathanCPI
  T5 Series Caller ID to Internal Users TSISara 1 3,999 08-08-2021 01:23 AM
Last Post: testlabuser2015
  Attened Transfers Caller ID T53 adam.robertson 0 2,741 08-02-2021 03:39 PM
Last Post: adam.robertson
  T58A Teams, Caller ID only shows name Matthew74 0 3,965 04-28-2020 07:51 PM
Last Post: Matthew74
  Question about audible caller ID jasril 0 3,223 01-14-2020 12:00 AM
Last Post: jasril
  Call History Display Caller Name mattdarnell 2 8,754 04-14-2018 09:19 AM
Last Post: Philipp Biermann

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication