[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41S Custom logo only displays temporarily
Author Message
cwacker Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #1
T41S Custom logo only displays temporarily
I have a fleet of T41S phones that I would love to deploy a screensaver style logo to (Company logo) on the phones. I was able to get the custom logo file generated and uploaded to the test phone, but the logo only displays for a couple seconds and it reverts back to the default screen.

What settings do I need to change so that the screensaver stays up until a call comes in or the phone is used? (or even so that the screensaver stays up longer than 3 seconds before it goes back to the main screen?)
09-28-2018 03:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,503
Joined: Jan 2014
Reputation: 43
Post: #2
RE: T41S Custom logo only displays temporarily
(09-28-2018 03:58 PM)cwacker Wrote:  I have a fleet of T41S phones that I would love to deploy a screensaver style logo to (Company logo) on the phones. I was able to get the custom logo file generated and uploaded to the test phone, but the logo only displays for a couple seconds and it reverts back to the default screen.

What settings do I need to change so that the screensaver stays up until a call comes in or the phone is used? (or even so that the screensaver stays up longer than 3 seconds before it goes back to the main screen?)

Hi,

Please go to Settings > Preference and setup settings accordingly the screenshot in attachment. This should do the trick.


Attached File(s) Thumbnail(s)
   

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-29-2018 12:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cwacker Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #3
RE: T41S Custom logo only displays temporarily
(09-29-2018 12:32 PM)complex1 Wrote:  Hi,

Please go to Settings > Preference and setup settings accordingly the screenshot in attachment. This should do the trick.

Hi,
I do not have those settings under Settings > Preference. I have attached my settings page.

I am currently running a T41S phone with firmware:
Firmware Version 66.82.0.20
Hardware Version 68.0.0.0.0.0.0

Any other ideas? Is there a different firmware that will work better?


Attached File(s) Thumbnail(s)
   
10-01-2018 12:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,503
Joined: Jan 2014
Reputation: 43
Post: #4
RE: T41S Custom logo only displays temporarily
(10-01-2018 12:05 PM)cwacker Wrote:  
(09-29-2018 12:32 PM)complex1 Wrote:  Hi,

Please go to Settings > Preference and setup settings accordingly the screenshot in attachment. This should do the trick.

Hi,
I do not have those settings under Settings > Preference. I have attached my settings page.

I am currently running a T41S phone with firmware:
Firmware Version 66.82.0.20
Hardware Version 68.0.0.0.0.0.0

Any other ideas? Is there a different firmware that will work better?

Hi,

It does not appear to be possible to add your own logo as screensaver picture. Undecided
The T41S IP phone only displays custom information as the screen saver.
Please read page 105 and further of the admin guide.
http://download.support.yealink.com/down...V84_11.pdf

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-01-2018 05:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cwacker Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #5
RE: T41S Custom logo only displays temporarily
(10-01-2018 05:07 PM)complex1 Wrote:  Hi,

It does not appear to be possible to add your own logo as screensaver picture. Undecided
The T41S IP phone only displays custom information as the screen saver.
Please read page 105 and further of the admin guide.
http://download.support.yealink.com/down...V84_11.pdf

Hi,
On Page 132 of that guide it shows how to do the custom Logo (which is what I am currently using) but there is no mention of how to disable it switching alternatively between Idle Screen and Logo screen, or how to set times for each to display. Currently it shows the Logo for 3 seconds, and then the Idle screen for 10 seconds. This is rather annoying and seemingly backwards of what I would expect, but I cannot find any documentation on how to change the time limits on either of those displays.

Is this possible? Or is there a way to suggest feedback to yealink to add these as configurable? I updated to 66.84.0.10 and it hasn't added any additional options for this configuration.
10-01-2018 06:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,503
Joined: Jan 2014
Reputation: 43
Post: #6
RE: T41S Custom logo only displays temporarily
(10-01-2018 06:35 PM)cwacker Wrote:  
(10-01-2018 05:07 PM)complex1 Wrote:  Hi,

It does not appear to be possible to add your own logo as screensaver picture. Undecided
The T41S IP phone only displays custom information as the screen saver.
Please read page 105 and further of the admin guide.
http://download.support.yealink.com/down...V84_11.pdf

Hi,
On Page 132 of that guide it shows how to do the custom Logo (which is what I am currently using) but there is no mention of how to disable it switching alternatively between Idle Screen and Logo screen, or how to set times for each to display. Currently it shows the Logo for 3 seconds, and then the Idle screen for 10 seconds. This is rather annoying and seemingly backwards of what I would expect, but I cannot find any documentation on how to change the time limits on either of those displays.

Is this possible? Or is there a way to suggest feedback to yealink to add these as configurable? I updated to 66.84.0.10 and it hasn't added any additional options for this configuration.

Hi,

I do not have a T41S for test so I cannot reproduce your issue. Sorry.
You can make a wish request and send it to Yealink Support, I think.
Keep in mind that Yealink Office is closed from 1st Oct to 7th Oct to for National Day Holiday.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
10-02-2018 04:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #7
RE: T41S Custom logo only displays temporarily
Honestly it is not worth fighting for. If you really want customized logo/display then use a higher level phone than the T41.

The reason Yealink switches between the logo and the idle screen is that the LCD is not capable of display the graphic and the fixed/idle information at the same time... they are rendered by two completely separate processes and just don't play well together. We went down this road many years ago back with the T28s and T26/T22s. The 28s worked great as the logo would always show in the blank area of the display, but on the lower phones they would just continually flip back and forth between the logo and the actual interface. At the time Yealink explained that was by design and quite frankly we had a hard time trying to argue differently.

It's nice branding to be able to customize the phone's appearance, but on sets with such small basic screens it's just not worth fighting over and these days with so many more models and features to focus on I doubt you will ever convince a Yealink dev to spend time on it for you.

If customized display is your primary concern the T29 is a reasonable compromise between the T46 and the more basic T41/T42. Styling is a little plainer but the screen is the same one used in the 46 and price point is about 30% more than T41 compared to 80% for T46. T52S may also be worth looking at.
10-05-2018 08:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cwacker Offline
Junior Member
**

Posts: 4
Joined: Sep 2018
Reputation: 0
Post: #8
RE: T41S Custom logo only displays temporarily
(10-05-2018 08:10 PM)jolouis Wrote:  Honestly it is not worth fighting for. If you really want customized logo/display then use a higher level phone than the T41.

The reason Yealink switches between the logo and the idle screen is that the LCD is not capable of display the graphic and the fixed/idle information at the same time... they are rendered by two completely separate processes and just don't play well together. We went down this road many years ago back with the T28s and T26/T22s. The 28s worked great as the logo would always show in the blank area of the display, but on the lower phones they would just continually flip back and forth between the logo and the actual interface. At the time Yealink explained that was by design and quite frankly we had a hard time trying to argue differently.

It's nice branding to be able to customize the phone's appearance, but on sets with such small basic screens it's just not worth fighting over and these days with so many more models and features to focus on I doubt you will ever convince a Yealink dev to spend time on it for you.

If customized display is your primary concern the T29 is a reasonable compromise between the T46 and the more basic T41/T42. Styling is a little plainer but the screen is the same one used in the 46 and price point is about 30% more than T41 compared to 80% for T46. T52S may also be worth looking at.


That's a good possible solution. We were hoping we could just use the branding when the display goes into power saving mode (or a similar idea where the display is completely disabled and shows the logo until it's prompted with a status change of any sort)

We're fine without the logo since I haven't actually told anyone but my manager that it is a possibility. I was pretty careful to make sure I didn't say anything when marketing was in the room otherwise they'd be expecting miracles.

Fortunately, at this point, this is the only thing we could classify as an issue on the phones. Everything else is rock solid, and since these phones are going to be in areas where damage is likely, we're going to err on the side of ***** and functional instead of "can have branding".

Thank you for the notes. I really appreciate it.
10-05-2018 09:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #9
RE: T41S Custom logo only displays temporarily
(10-05-2018 09:25 PM)cwacker Wrote:  Fortunately, at this point, this is the only thing we could classify as an issue on the phones. Everything else is rock solid, and since these phones are going to be in areas where damage is likely, we're going to err on the side of ***** and functional instead of "can have branding".

Thank you for the notes. I really appreciate it.

No worries. We have been deploying Yealink phones for almost 10 years now and found that they are consistently the best high quality but affordable products in the market. The support from them is also extremely good as long as you follow the proper channels (i.e. buy through an authorized distributor in your region).
10-10-2018 06:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S Handset logo and menu style jseeley 0 694 09-05-2023 08:52 AM
Last Post: jseeley
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,715 08-23-2023 01:00 AM
Last Post: complex1
  T48U Custom Firmware Upgrade to Official Friendly 0 1,857 03-29-2023 01:20 AM
Last Post: Friendly
  T41S custom sip header volga629 0 1,002 03-20-2023 10:08 AM
Last Post: volga629
  Yealink T41S firmware kosif 0 1,888 12-19-2022 08:52 AM
Last Post: kosif
  LCD DSS keys displays large buttons over date / time xuan69 2 4,884 11-03-2021 06:57 PM
Last Post: xuan69
  T41S lpelusi@konnectcommunications.co.uk 0 2,334 08-31-2021 08:53 PM
Last Post: lpelusi@konnectcommunications.co.uk
  T41S Recovery rfmjohn 3 7,643 06-19-2021 03:33 AM
Last Post: complex1
  T41S: Bridge current call with a second incoming call digitel 1 4,877 05-21-2021 04:15 PM
Last Post: complex1
  Need to remove custom Fonality firmware 1CCT 16 38,017 05-03-2021 08:24 PM
Last Post: kmconklin

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication