T23G Recovery Mode Upload Fail

[stan0ne]

Hello friends..
i have problems..

i have ;

• T2X.rom
• T2X.rfs
• T2X.bin
  

i going recevory mode from T23G, i starting recovery update but tftp server error "TFTP: File too large"..
I have tried different programs;

• OpenTFTPServer
• tftpd32/64
• PumpKIN
• 3cDaemon
  

I always get the following warning:
File too Large
and t23 warning:
Update failed(-5)

please help me..

[East_Yealink]

Dear Customer,
 
This is East from Yealink Technical Support team, nice to meet you.
 
If you are using TFTP server on Linux, please rename the ROM file from "T2X.rom" to "T2x.rom" (lowercase "x") and try again.
 
If that doesn't take effect, It should be a hardware issue, please contact your phone provider for help. If you cannot contact them, please provide the SN of the phone, I will inform our sales colleague to help. (You can sent it to my email address: east@yealink.com)

Best Regards,
East

[ashabana]

(09-28-2018 09:41 AM)East_Yealink Wrote:  Dear Customer,
 
This is East from Yealink Technical Support team, nice to meet you.
 
If you are using TFTP server on Linux, please rename the ROM file from "T2X.rom" to "T2x.rom" (lowercase "x") and try again.
 
If that doesn't take effect, It should be a hardware issue, please contact your phone provider for help. If you cannot contact them, please provide the SN of the phone, I will inform our sales colleague to help. (You can sent it to my email address: east@yealink.com)

Best Regards,
East

Hi East,
I have the same issue with T58A . does renaming the file to T58v.rom will solve it?

[Scottie]

I have the same issue T58A with SIP flashed to Teams to test / play around, wanted to go back to SIP only and now the phone rejects the firmware via USB or TFTP, TFTP error code says file too large, as in the phone is rejecting the firmware as it thinks its too big.

I am using all the correct recovery firmware files from my distributor.

Yealink can you help out ?

(03-25-2019 06:48 PM)ashabana Wrote:  

(09-28-2018 09:41 AM)East_Yealink Wrote:  Dear Customer,
 
This is East from Yealink Technical Support team, nice to meet you.
 
If you are using TFTP server on Linux, please rename the ROM file from "T2X.rom" to "T2x.rom" (lowercase "x") and try again.
 
If that doesn't take effect, It should be a hardware issue, please contact your phone provider for help. If you cannot contact them, please provide the SN of the phone, I will inform our sales colleague to help. (You can sent it to my email address: east@yealink.com)

Best Regards,
East

Hi East,
I have the same issue with T58A . does renaming the file to T58v.rom will solve it?

[Ricorocks]

(10-04-2019 03:56 AM)Scottie Wrote:  I have the same issue T58A with SIP flashed to Teams to test / play around, wanted to go back to SIP only and now the phone rejects the firmware via USB or TFTP, TFTP error code says file too large, as in the phone is rejecting the firmware as it thinks its too big.

I am using all the correct recovery firmware files from my distributor.

Yealink can you help out ?

(03-25-2019 06:48 PM)ashabana Wrote:  

(09-28-2018 09:41 AM)East_Yealink Wrote:  Dear Customer,
 
This is East from Yealink Technical Support team, nice to meet you.
 
If you are using TFTP server on Linux, please rename the ROM file from "T2X.rom" to "T2x.rom" (lowercase "x") and try again.
 
If that doesn't take effect, It should be a hardware issue, please contact your phone provider for help. If you cannot contact them, please provide the SN of the phone, I will inform our sales colleague to help. (You can sent it to my email address: east@yealink.com)

Best Regards,
East

Hi East,
I have the same issue with T58A . does renaming the file to T58v.rom will solve it?

Did you ever get a fix for this? I have the same error

[tarkan]

(10-04-2019 03:56 AM)Scottie Wrote:  I have the same issue T58A with SIP flashed to Teams to test / play around, wanted to go back to SIP only and now the phone rejects the firmware via USB or TFTP, TFTP error code says file too large, as in the phone is rejecting the firmware as it thinks its too big.

I am using all the correct recovery firmware files from my distributor.

Yealink can you help out ?

(03-25-2019 06:48 PM)ashabana Wrote:  

(09-28-2018 09:41 AM)East_Yealink Wrote:  Dear Customer,
 
This is East from Yealink Technical Support team, nice to meet you.
 
If you are using TFTP server on Linux, please rename the ROM file from "T2X.rom" to "T2x.rom" (lowercase "x") and try again.
 
If that doesn't take effect, It should be a hardware issue, please contact your phone provider for help. If you cannot contact them, please provide the SN of the phone, I will inform our sales colleague to help. (You can sent it to my email address: east@yealink.com)

Best Regards,
East

Hi East,
I have the same issue with T58A . does renaming the file to T58v.rom will solve it?

Was there a solution found to this problem as i have exactly the same issue

[Lewis-H]

If there is a TFTP server installed on your
local system, you can skip this section and go to the next.
Procedures:
1. Create a TFTP root directory on the local system.
2. Place resource files to this root directory.
3. Double click the tftpd32.exe to start the application.
Recovery Mode on Yealink IP phones
4. Click the button to locate the TFTP root directory from the local system.
5. Select the local IP address from the pull-down list of Server interface.
Take a note of the server IP address (e.g., 10.2.11.123) which is used at the later
stage.
This section introduces how to perform recovery mode on Yealink IP phones step by
step.
The section is only applicable to SIP phone series including SIP-T19(P) E2, T20P, T21P E2,
T22P, T23P/G, T26P, T28P, T29G, T32G, T38G, T41P, T42G,T46G, T48G,T60G, T61(P/G), T65P,
T66 P/G and T68.

[nolto]

How did you resolve this issue?
I have the same problem here.