[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can't recover T48G via TFTP
Author Message
sani390 Offline
Junior Member
**

Posts: 14
Joined: Mar 2017
Reputation: 0
Post: #1
Can't recover T48G via TFTP
One of our T48G devices currently can't connect to any account and when we compared the web interface with a working phone there were different fields showing. Despite those two phones having the same firmware version it seems as there is something wrong with the upgrade procedure.
Since downgrading (flashing lower firmware version through web interface) and autoprovision doesn't work anymore - as well as countless factory resets, we figured that there was a faulty update/reset down the line.

Because of this I just tried to recover the phone as described in the yealink guide with TFTP. The connection was established, but the phone keeps reporting the the TFTP client that T48G.rom ist too large. Since it's the phone that's reporting this I can't think of any way to fix this on my side. The recovery isn't possible with Jounis TFTP client or the one from 3com. All get the same answer.

Do you have any suggestion or is this phone officially "fried"?
09-10-2018 07:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
johnkiniston Offline
Junior Member
**

Posts: 24
Joined: Apr 2013
Reputation: 1
Post: #2
RE: Can't recover T48G via TFTP
I'd suggest trying to load an older smaller firmware on the phone if possible.
09-13-2018 04:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sani390 Offline
Junior Member
**

Posts: 14
Joined: Mar 2017
Reputation: 0
Post: #3
RE: Can't recover T48G via TFTP
@johnkiniston
Thank you for your replay, but I tried this too.

It happens that I could solve the issue with the help of the yealink support and wanted to share this with everyone in case you have the same problem.

It seems that the internal CA-Certificate of the T48S can cause conflicts with some SIP servers. In that case you have to access the web interface, go to "security", "trusted certificates" and set "Only accept trusted certificates to "disabled".

That's it. Now the phone works flawlessly.
09-14-2018 10:56 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G/T49G on Ring Central? Gordon 2 10,546 12-27-2023 10:38 AM
Last Post: jseeley
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 11,256 11-16-2023 01:08 AM
Last Post: here4real
  T48G Connected handset not answering or ending call with connected handset. Pettis 4 4,226 07-27-2023 05:38 AM
Last Post: Lissvazquez
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 6,091 09-30-2022 03:23 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 3,464 09-30-2022 12:55 AM
Last Post: complex1
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 70,402 08-01-2021 06:14 PM
Last Post: Phil2021
Question T48G + WH66 Futureweb 1 4,943 06-09-2021 09:22 PM
Last Post: Futureweb
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 8,099 04-09-2021 05:16 PM
Last Post: eurix
  WF50 wifi adapter on T48G? freak 2 10,547 10-31-2020 05:41 AM
Last Post: SCPCJNR
  T48G Onscreen keyboard languages eliah 7 20,504 10-30-2020 06:51 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication