[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Latest software
Author Message
boardshorst Offline
Junior Member
**

Posts: 5
Joined: Sep 2014
Reputation: 2
Post: #1
Latest software
Yealink site http://support.yealink.com/documentFront...umentId=25 shows
Base for W52P&W56P-25.81.0.10.rom W52H-26.81.0.30.rom as latest roms

3CX link to your site https://www.yealink.com/products_48.html shows

Base for W52P&W56P-25.81.0.30 W52H for W60P-26.81.0.40

Confused as to which to use - running .10 on W52P and .30 on W52H's.

Having to unplug power (sometimes multiple times to get it to come back) on regular basis - did a factory reset and reconfigure about a month ago but still a problem.

Tried to export configuration but get a zero byte file.

Wonder if Base for W52P&W56P-25.81.0.30 addresses some of this??

W52P - Base 25.81.0.10 2xHandsets 26.81.0.30 3xVOIP Accounts
09-01-2018 06:36 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,299
Joined: Jan 2014
Reputation: 39
Post: #2
RE: Latest software
(09-01-2018 06:36 AM)boardshorst Wrote:  Yealink site http://support.yealink.com/documentFront...umentId=25 shows
Base for W52P&W56P-25.81.0.10.rom W52H-26.81.0.30.rom as latest roms

3CX link to your site https://www.yealink.com/products_48.html shows

Base for W52P&W56P-25.81.0.30 W52H for W60P-26.81.0.40

Confused as to which to use - running .10 on W52P and .30 on W52H's.

Having to unplug power (sometimes multiple times to get it to come back) on regular basis - did a factory reset and reconfigure about a month ago but still a problem.

Tried to export configuration but get a zero byte file.

Wonder if Base for W52P&W56P-25.81.0.30 addresses some of this??

Hi,

I do not know what differences are between these firmwares, but as far as I know the firmware found on the 3CX link, are for devices connected to 3CX to give a better interoperability.
For “normal” use the .10 and .30 firmware should be fine.

Please try a other power supply and check if the issue stay away.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
09-01-2018 09:49 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P latest firmware JackDan 2 11,143 06-19-2016 09:38 AM
Last Post: JackDan
  Latest UK firmware Terry 1 6,212 04-10-2015 12:39 AM
Last Post: Yealink_Peter

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication