[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G - Line Call Forwarding to External #
Author Message
David R Offline
Junior Member
**

Posts: 1
Joined: May 2018
Reputation: 0
Post: #1
T46G - Line Call Forwarding to External #
Equipment:
Yealink T46G - I have one phone, no PBX, Connected directly to modem, 5 incoming SIP lines.
Version:
Firmware Version 28.83.0.35
Hardware Version 28.1.0.128.0.0.0

Problem: Call forwarding is set for busy lines, and no answer to an external line. It stopped working this spring, and I have been unable to find the solution to properly troubleshoot.

What happens now:
The phone's screen says Forward to: [the programmed #], there is a brief busy signal, and the call is dropped.

What I tried:
I thought it might have been an issue with my virtual voice mail service, but it won't forward to any other number either. I have updated the software, I have reset the phone to factory specs, and I have followed the tutorials, and now have invested more time and energy into this than I care to admit.

Either the software has a glitch, or I missed something.

Please help me.
(This post was last modified: 08-13-2018 02:38 PM by David R.)
08-13-2018 02:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: T46G - Line Call Forwarding to External #
Sounds more like your service provider changed something on your end and is not letting the call forward happen. Since you are not in control of the PBX you will need to contact the provider and see if they can assist you in troubleshooting this. I doubt it's anything to do with the phone itself. If you wanted to be really sure you could run a pcap trace on the phone, then try dialing in and see exactly what the SIP messages back and forth say when the call gets dropped. I suspect you would see the phone send a "Forward to ###" message to the PBX, and the PBX send back a rejection or failure for some reason.
08-17-2018 02:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 8,513 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 7,433 10-28-2022 03:28 AM
Last Post: tredd1982
  Transfer error: Not Emergency Call tredd1982 0 377 10-28-2022 03:15 AM
Last Post: tredd1982
  get accout in call log me475z8029357 0 414 10-27-2022 05:50 PM
Last Post: me475z8029357
  Yealink T46S Forwarding does not work!! Müller 0 435 10-16-2022 03:38 AM
Last Post: Müller
  Locking down buttons/No Line select blmarsa 0 370 10-06-2022 09:23 AM
Last Post: blmarsa
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 3,387 09-30-2022 03:23 AM
Last Post: knewgent
  T46G SSL 2 & 3 Vulnerability russavd 0 505 09-24-2022 05:07 AM
Last Post: russavd
  Display current time during a call cecilia.dellaria@statewide.com 0 486 09-23-2022 11:48 PM
Last Post: cecilia.dellaria@statewide.com
  T43U_BLF Like Key randomly changes to Line key Type DND Balavan 0 609 08-19-2022 09:37 PM
Last Post: Balavan

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication