[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41P with YHS32 Headset Microphone Volume Issue
Author Message
dman84 Offline
Junior Member
**

Posts: 1
Joined: Aug 2015
Reputation: 0
Post: #1
T41P with YHS32 Headset Microphone Volume Issue
Hi All

I am using a few T41P Handsets with YHS32 Headsets and finding that the Microphone Volume is very low. The web interface appears to have no option for increasing the Mic Volume or Gain and I was hoping that someone may have a solution for this?

I am using Firmware Version 36.73.0.50 the handsets also.

Thank you very much in advance Smile
Dan
08-03-2015 09:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi,

1.Please upgarde to lastest firmware
2.If it does not work,please kindly reset to factory setting and try again.
3.If the above checking does not work.You can auto privisioning the parameter below to increase the mic volume.
voice.headset_send=
Integer from -50 to 50,the deafult is 0.
But we do not sugget customer change the parameter of change the number to high.
Because it may render the voice quality bad.
08-03-2015 04:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Remko Schenk Offline
Senior 3CX - Yealink
**

Posts: 10
Joined: Jul 2013
Reputation: 0
Post: #3
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi Yealink,

We have the same problem with a Sennheiser heaset, the SC260, in combination with the T41. We use 3CX.
This headset is an tested headset and is on the Yealink tested headset list.
The microphone volume of that headset is to low.

I have tested with different firmware levels, also with the latest V36.80.0.70 firmware. no better results.
I have tested with the provisioning settings for "voice.headset_send = ", as named in several threads on the Yealink forum.
In some threads is the setting between -120 to 30 and in this thread you named between -50 and 50. I have tried all but no better result.

Can you please tell me what the solution is?

greets Remko
08-10-2015 08:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi,

1.Sennheiser SC260 need wireless headset connection of Sennheiser 5362-CSTD 01 Cables,do you have it?
2.Please kindly reset to factory setting and try again.
3.The default parameter in V80 version between -50 and 50.
08-11-2015 01:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Remko Schenk Offline
Senior 3CX - Yealink
**

Posts: 10
Joined: Jul 2013
Reputation: 0
Post: #5
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi Karl,

1. Yes we have the 5362-CSTD 01, otherwise we cann't connect the headset. This is an wired headset, not wireless.
2. yes we have factory default it, but in our envirement the phone gets with LDAP the right VLAN and configuration from 3CX.
In that case the phone gets no voice.headset_send information because this isn't in the template.
3. thanks for the right parameters. I have tested it in the template with 3CX and there is no improvement, it still keeps very low mic volume.

ok, i did a factory reset with 36.80.0.70 firmware and manually programmed the account. The voice send volume is better.
I think that the provisioning by 3CX the voice.headset_send parameter isn't functioning. When I provisioning the phone by default template the send volume is lower then by factory defaults. When I try an other value (by example 48) there is no difference, the volume keeps low.

Do you have an suggestion?

Regards Remko
08-11-2015 08:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #6
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi,

Can you help to get config.bin file. We can check something from them.
A config.bin when you provisioning the phone by default template.
A config.bin when you try an other value (by example 48).
The files can be got from phone web interface-> Setting-> Configuration->Export or Import Configuration,
and export the file.
08-12-2015 12:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Remko Schenk Offline
Senior 3CX - Yealink
**

Posts: 10
Joined: Jul 2013
Reputation: 0
Post: #7
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi Karl,

I have attached th bin files.

Best regards Remko.


Attached File(s)
.bin  T41_manual_programmed.bin (Size: 174.52 KB / Downloads: 1)
.bin  T41_provisioning-3CX_voice-headset_send=48.bin (Size: 175.02 KB / Downloads: 1)
.bin  T41_provisioning-3CX.bin (Size: 169.52 KB / Downloads: 1)
08-13-2015 04:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #8
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi,

From the bin files. I find the headset-send-volume = 1 in three files.
So you maybe can't auto provisioning succeed.
08-15-2015 01:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Remko Schenk Offline
Senior 3CX - Yealink
**

Posts: 10
Joined: Jul 2013
Reputation: 0
Post: #9
RE: T41P with YHS32 Headset Microphone Volume Issue
Hi Karl,

I found out that the problem is with provisioning by 3CX.
When added that line and checking by MAC-template, its not in that template.
So its normal that its also not in the phone.
I have made a ticket by 3CX support an d wait for a answer.

Best regards Remko
08-20-2015 09:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ausadmin Offline
Junior Member
**

Posts: 2
Joined: Nov 2015
Reputation: 0
Post: #10
RE: T41P with YHS32 Headset Microphone Volume Issue
FWIW, I was able to adjust up the headset and handset mic volume on one of our T41P phones (running 36.80.0.60) as follows
- export all configuration
- add the following lines to the file
voice.headset_send = 40
voice.handset_send = 10
- import all configuration

Regards,
Tim
11-24-2015 08:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Smile T43U handset only works when headset button is green jaydub 2 273 03-21-2024 07:13 AM
Last Post: jaydub
  T43 issue with Teams Sip Gateway mecano427 1 367 03-01-2024 08:28 PM
Last Post: complex1
  Headset Microphone Talkback Volume zeynox 3 2,188 12-14-2023 09:10 AM
Last Post: polinkuer12
  No dialtone - T46S, EHS36, Sennheiser headset Huleboer 0 1,914 09-28-2023 05:49 PM
Last Post: Huleboer
  T42U Issue on Teams / Direct Routing TheGarrison 1 1,469 08-11-2023 11:20 PM
Last Post: TheGarrison
  T46S issue with Showing Additional DSS Pages ama 1 1,332 06-10-2023 12:44 AM
Last Post: Yisroel_MongoTEL
Bug T41P OpenVPN w/ PSK fails rnalrd 0 995 01-20-2023 10:52 PM
Last Post: rnalrd
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 11,552 01-02-2023 01:30 AM
Last Post: kw160008
Question Sip - T41P - Displaying wrong information and can't redial StaceyStorm 1 1,759 10-14-2022 11:19 PM
Last Post: complex1
  Hotdesking extra account issue gareth20202 0 1,418 08-05-2022 08:06 PM
Last Post: gareth20202

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication