[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Just firmware
Author Message
RC179 Offline
Junior Member

Posts: 2
Joined: Jul 2018
Reputation: 0
Post: #1
Just firmware
I need to do some very limited automation, right now it's just firmware updates but I'll be adding a few other options later. Some of these quests are dependent on others and there is some overlap as well. Hope I haven't made it too confusing.

When I specify the firmwareurl, am I specifying just the tftp server (and maybe the folder), or do I need to specify the filename as well (which I would need to change each time a new firmware is added). I'd rather not have to change the .cfg each time I add a firmware to the tftp server.

Can I put all the firmware updates (different models) in one directory, and the phones will just know which to use, or does each model require it's own directory?

So can I use a single common .cfg or do I have to use a model specific common .cfg for each model? I'm only pushing the firmware and not anything specific to the model.

If I only use one .cfg do I have to use the model specific prefix and have a firmwareurl statement for every model?

In either case, do I need a separate folder (on the tftp server) for each model or will the phones just know which firmware is for them? Is this dependent on keeping the original names on the firmware files?

If the .cfg file has not changed, so the phone doesn't pull a new copy, will it still pull the new firmware if that has changed?

What is the timeout on connecting to the tftp server?

If a configuration server is specified via dhcp, and the phone cannot connect to it, what configuration information is used?

It's very important that the current settings on the phones are not affected by the .cfg files (which will not contain any settings other than the firmware info). The actual phone configuration needs to stay on the phone for now.

07-11-2018 06:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
johnkiniston Offline
Junior Member

Posts: 24
Joined: Apr 2013
Reputation: 1
Post: #2
RE: Just firmware
You must specify the file on the firmwareurl line.

You can have all your files in the same directory.

I'd use a model specific config file for this, the y00000000XX.cfg file that gets read per model.
07-12-2018 06:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T41S firmware kosif 0 618 12-19-2022 08:52 AM
Last Post: kosif
  T42S unable to update firmware brianstoiber 6 2,926 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 4,496 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 4,099 01-14-2022 10:22 AM
Last Post: kumagera
  Need to remove custom Fonality firmware 1CCT 16 31,277 05-03-2021 08:24 PM
Last Post: kmconklin
  SIP-T46s Bricked after latest firmware update. daniel.broome 2 6,355 04-27-2021 11:39 AM
Last Post: daniel.broome
  OEM Firmware change NotKnown 1 4,368 04-14-2021 07:41 PM
Last Post: complex1
  documentation and firmware T43u jmooo 0 3,435 02-18-2021 02:23 AM
Last Post: jmooo
  Avoid Firmware V85 at all costs! Luke Escude 0 2,651 02-13-2021 12:06 AM
Last Post: Luke Escude
Bug Yealink T46G wont turn on after firmware update mike702 1 4,415 02-02-2021 08:21 PM
Last Post: complex1

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication