New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto provisioning seams to be (partly) broken in version 83 for T46G
Author Message
HaraldL Offline
Junior Member
**

Posts: 13
Joined: Jun 2015
Reputation: 0
Post: #1
Auto provisioning seams to be (partly) broken in version 83 for T46G
Since Upgrading to T46-28.83.0.35 the provisioning doesn't work reliable on the T46G. But still the same configuration works for T48G phones.

for example BLF pickup_value ** doesn't work or at least only works sometimes. The value simply doesn't get written in the phone config. It works if I set this value manually in the webinterface.

We distribute the following config files to the phones:

boot config:
Code:
#!version:1.0.0.1

overwrite_mode = 1
specific_model.excluded_mode=0
auto_provision.custom.protect=0
include:config "http://HOSTNAME/yealink/yealink.php/default.cfg"
include:config "http://HOSTNAME/yealink/yealink.php/001565800000.cfg"

default config:
Code:
#!version:1.0.0.1

local_time.time_zone = +1
local_time.time_zone_name = Austria(Vienna)
local_time.ntp_server1 = ntp.hostname
local_time.ntp_server2 = 192.168.0.1
local_time.dhcp_time = 1
local_time.date_format = 6
local_time.manual_ntp_srv_prior = 1
lang.gui = German
lang.wui = German
voice.tone.country = Austria
transfer.tran_others_after_conf_enable = 1
transfer.dsskey_deal_type = 1
screensaver.wait_time = 15
screensaver.type = 2
push_xml.server = 192.168.0.200
push_xml.block_in_calling = 1
auto_provision.mode = 6
auto_provision.pnp_enable = 1
auto_provision.dhcp_option.enable = 1
auto_provision.dhcp_option.list_user_options =
auto_provision.repeat.enable = 1
auto_provision.repeat.minutes = 60
auto_provision.weekly.enable = 1
auto_provision.weekly.mask = 0123456
auto_provision.weekly.begin_time = 07:00
auto_provision.weekly.end_time = 07:15

mac config:
Code:
#!version:1.0.0.1

account.1.enable = 1
account.1.sip_server.1.address = pbx
account.1.sip_server.1.port = 5060
account.1.sip_server.1.expires = 60
account.1.dtmf.info_type = 1
account.1.label = Name1
account.1.display_name = Name1
account.1.user_name = 65
account.1.auth_name = 65
account.1.password = password
account.2.enable = 1
account.2.sip_server.1.address = 192.168.0.222
account.2.sip_server.1.port = 5060
account.2.dtmf.info_type = 1
account.2.label = Name
account.2.display_name = Name
account.2.user_name = 65
account.2.auth_name = 65
account.2.password = password
linekey.3.type = 16
linekey.3.line = 1
linekey.3.label = Name0
linekey.3.value = 16
linekey.3.pickup_value = **
linekey.4.type = 16
linekey.4.line = 1
linekey.4.label = Name1
linekey.4.value = 66
linekey.4.pickup_value = **
linekey.5.type = 13
linekey.5.line = 1
linekey.5.label = Name2
linekey.5.value = 1234566
linekey.5.pickup_value = %NULL%
wallpaper_upload.url = http://HOSTNAME/Backgrounds/BehatiLandschaft-31.jpg
phone_setting.backgrounds = BehatiLandschaft-31.jpg

It works sometimes and sometimes it doesn't.

Downgrading to Version 82 seams to work.
(This post was last modified: 07-19-2018 11:10 AM by HaraldL.)
07-06-2018 10:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
HaraldL Offline
Junior Member
**

Posts: 13
Joined: Jun 2015
Reputation: 0
Post: #2
RE: Auto provisioning seams to be (partly) broken in version 83 for T46G
no answer is a bad answer?

I downgrade all phones and they are working again...
07-16-2018 07:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Fraukas2 Offline
Kolibri Telecommunication
**

Posts: 35
Joined: Jan 2017
Reputation: 0
Post: #3
RE: Auto provisioning seams to be (partly) broken in version 83 for T46G
Hello,

I know this is an old post, but I think the firmware version 84 also has this problem.
On my T46S with firmware 66.84.0.15, when I factory reset my phone, it gets re-provisionned by the RPS. Then it gets configured with all my BLFs from my auto provision server.
For testing purposes, if I manually place 2-3 BLFs to N/A instead of BLF, and trigger the auto-provision or if I restart the phone, the BLFs doesn't get configured.
I thought maybe the problem was that username or password in the auto-provision was too complex, but placing them back to 1234567890 for both didn't make the phone provision correctly.
07-02-2019 03:04 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Lightbulb Auto provision firmware ... Yuriy Y. 1 812 04-26-2019 05:40 AM
Last Post: Yuriy Y.
  Provisioning Multiple Wallpapers BryanLee 1 984 04-24-2019 08:39 PM
Last Post: joew
  T23G won't donwload y000000000044.cfg from Provisioning Server rsardinha 3 909 04-12-2019 06:13 PM
Last Post: rsardinha
  T22P always auto restart jamess2007 2 942 03-13-2019 11:49 AM
Last Post: Langveldt
  Firewall Settings for Auto Provisioning ChristophWHAT 2 1,363 02-04-2019 12:47 PM
Last Post: ChristophWHAT
  Multiple provisioning servers Integra Business Solutions Inc. 4 1,778 10-26-2018 06:49 PM
Last Post: Integra Business Solutions Inc.
  Auto Provisioning Hangs Rus 1 1,213 10-17-2018 11:06 AM
Last Post: Rus
  Auto provisioning file names shane.caznet 1 1,488 10-12-2018 02:56 PM
Last Post: jolouis
  Auto-Provision Firmware Rus 0 1,080 08-24-2018 11:07 AM
Last Post: Rus
  Auto Provision - first time with encrypting.. Gilb 14 17,163 06-21-2018 10:05 AM
Last Post: wanna

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication