[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSS Line key not changing colors T46 when created with bulk extension creato
Author Message
sethf Offline
Junior Member
**

Posts: 4
Joined: Jul 2015
Reputation: 0
Post: #1
DSS Line key not changing colors T46 when created with bulk extension creato
We are running freepbx with their paid endpoint manager with t46g, for some reason the phones I setup with the bulk extension creator wont change from green to red when that line is in use,the few extensions I did create manually work just fine. Has anyone seen this issue? I have crossed referenced all of the extensions and all of them are the same, the only difference what the ones that dont work were made with the bulk EX creator.
(This post was last modified: 07-31-2015 10:44 AM by sethf.)
07-31-2015 10:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: DSS Line key not changing colors T46 when created with bulk extension creato
hi

may i know that what do you mean by bulk EX creator ?

do you mean that you configure the BLF feature through the auto provision and you configured many BLF number and not of them work ?

please check whether the BLF value and lines are configured correct after the auto provision

the correct sentence should be as below :

programablekey.x.type = 16 //16 stands for BLF//
programablekey.x.value = // the extension you want to monitor//
programablekey.x.line = // the line you monitor other extension , it shoulbe be register to the same PBX with the extensions you monitored//

x stands for the key you want to set to BLF, it range from 1--13
07-31-2015 05:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sethf Offline
Junior Member
**

Posts: 4
Joined: Jul 2015
Reputation: 0
Post: #3
RE: DSS Line key not changing colors T46 when created with bulk extension creato
So to create out most of the extensions for the phone system I used the "bulk extensions creator" in freepbx, it makes it so you can create a bunch of extensions from a csv file. For some reason none of the extensions made with the bulk extension creator show the line key in use, the keys work and you use them to reach the other extensions but they key light does not show if the person is on the phone.

I have added how we had the endpoint manager set up, And like I said any of the extensions I created manually work perfect


(07-31-2015 05:43 PM)Yealink_Michael Wrote:  hi

may i know that what do you mean by bulk EX creator ?

do you mean that you configure the BLF feature through the auto provision and you configured many BLF number and not of them work ?

please check whether the BLF value and lines are configured correct after the auto provision

the correct sentence should be as below :

programablekey.x.type = 16 //16 stands for BLF//
programablekey.x.value = // the extension you want to monitor//
programablekey.x.line = // the line you monitor other extension , it shoulbe be register to the same PBX with the extensions you monitored//

x stands for the key you want to set to BLF, it range from 1--13


Attached File(s) Thumbnail(s)
   
(This post was last modified: 07-31-2015 11:07 PM by sethf.)
07-31-2015 10:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sethf Offline
Junior Member
**

Posts: 4
Joined: Jul 2015
Reputation: 0
Post: #4
RE: DSS Line key not changing colors T46 when created with bulk extension creato
So the phones that are working have no leds lit when no one is on the phone, the ones that are not working are green all of the time but will turn red when dnd is on, hope this helps
08-01-2015 12:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sethf Offline
Junior Member
**

Posts: 4
Joined: Jul 2015
Reputation: 0
Post: #5
RE: DSS Line key not changing colors T46 when created with bulk extension creato
Got it figured out the line in the bulk Ex creator devinfo_dial should be SIP\EXT with a capital SIP if not the keys will not work right
08-01-2015 06:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48U BLF show line status for selected users integral 2 1,726 07-17-2023 12:51 AM
Last Post: integral
  Locking down buttons/No Line select blmarsa 0 1,171 10-06-2022 09:23 AM
Last Post: blmarsa
  T43U_BLF Like Key randomly changes to Line key Type DND Balavan 0 1,540 08-19-2022 09:37 PM
Last Post: Balavan
  cannot transfer to Park line button srcenturic 0 1,779 06-10-2022 01:41 AM
Last Post: srcenturic
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 7,946 05-12-2022 05:41 PM
Last Post: rtfm2022
  Multiple lines for 1 extension here4real 1 2,654 03-10-2022 04:48 AM
Last Post: here4real
  Line Key6-10 Greyd Out - T46G redmondsau 0 3,368 10-02-2020 07:38 AM
Last Post: redmondsau
  Line Key LED vs BLF LED? uberdome 0 3,635 11-01-2019 08:46 PM
Last Post: uberdome
  T42S do not display icon in YealinkIPPhoneStatus line oliv 2 7,046 08-26-2019 06:15 AM
Last Post: oliv
  Changing the Hold function t46S Kala 1 6,360 06-24-2019 03:16 AM
Last Post: Simons_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication