[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenVPN Timeout connecting
Author Message
p2xt Offline
Junior Member
**

Posts: 11
Joined: Oct 2015
Reputation: 0
Post: #1
OpenVPN Timeout connecting
Hi,

I have a separate OpenVPN server which has been configred to work on the 10.7.0.0/16 class.

I am able to connect 2 T46 phones, but unfortunately only one client can register at one time. Ex: IF client1 is connected and registered, client2 cannot register (it timesout and i see no registration atempt on the asterisk server). If i disable client1, client2 automatically registers and if i re-enable client1 i will be able to see/ping it but it will not register.

Any suggestions would be greatly appreciated.

Regards,
Andrei
07-02-2018 07:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #2
RE: OpenVPN Timeout connecting
When you say only 1 client can register, do you mean only 1 can connect to the VPN at a time? Or VPN works on both, but only 1 can register to SIP server at a time?

If only 1 at a time on VPN, are you using the same client certificate on both devices? If so, you need to make sure your openVPN SERVER has:
duplicate-cn

option present/enabled. This allows multiple devices to use the same certificate to connect at the same time. There are pitfalls/disadvantages to this so rather than just blindly turning it on you should do some research into it first.
07-04-2018 06:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
p2xt Offline
Junior Member
**

Posts: 11
Joined: Oct 2015
Reputation: 0
Post: #3
RE: OpenVPN Timeout connecting
(07-04-2018 06:28 PM)jolouis Wrote:  When you say only 1 client can register, do you mean only 1 can connect to the VPN at a time? Or VPN works on both, but only 1 can register to SIP server at a time?

If only 1 at a time on VPN, are you using the same client certificate on both devices? If so, you need to make sure your openVPN SERVER has:
duplicate-cn

option present/enabled. This allows multiple devices to use the same certificate to connect at the same time. There are pitfalls/disadvantages to this so rather than just blindly turning it on you should do some research into it first.

hi jolouis,

thank you for your reply.

i am using 2 different clients (client1 and client2) on 2 different phones. If phone1-client1 is active phone2-client2 cannot connect and the other way around. It's funny as i can access the interface on both phones...

Is there anyway i can putty on the phones to check the routing?

Thanks,
Andrei
07-10-2018 01:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #4
RE: OpenVPN Timeout connecting
(07-10-2018 01:11 PM)p2xt Wrote:  i am using 2 different clients (client1 and client2) on 2 different phones. If phone1-client1 is active phone2-client2 cannot connect and the other way around. It's funny as i can access the interface on both phones...

What do you mean you can access the interface on both phones? Over the VPN you mean?

I think you need to take a step back and break this up into two situations:
a) Forget SIP accounts/etc for a moment. Can you get both phones to connect to VPN server and be active on the VPN at the same time? i.e. on your server you see both, you can ping both, and you can log in to both web interfaces over the VPN addresses?

b) If the above is true, then there is something else beyond the VPN that is causing the problems? Without using VPN, can you have both extensions register to your PBX at the same time (i.e. from local network does it work)?
07-13-2018 07:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  No dial tone when connecting calls internally tvettel 0 1,003 04-17-2024 02:20 PM
Last Post: tvettel
  Passing only LDAP traffic through OPENVPN Commensus 0 2,771 02-23-2022 09:47 PM
Last Post: Commensus
  Configuring OPENVPN with Yealink Commensus 0 3,268 02-23-2022 09:45 PM
Last Post: Commensus
  DHCP not working on T26P when OpenVPN is enabled. LandonL 11 40,168 05-12-2021 10:46 AM
Last Post: 1sae
  Solved Openvpn.tar creating the right size file compsos 3 9,831 08-20-2020 06:49 AM
Last Post: complex1
  OpenVPN and QoS/TOS roelvanmeer 0 5,184 02-19-2019 09:27 AM
Last Post: roelvanmeer
  T48G not connecting to Skype Lisa H 0 5,162 10-16-2017 03:17 AM
Last Post: Lisa H
  openvpn w52p setup rafael 4 21,053 08-10-2017 02:03 PM
Last Post: indicato
  can't setup openvpn with t48g zzz 8 27,319 07-18-2017 09:04 AM
Last Post: sj
  OpenVPN in T27P arcsistemes 1 8,355 07-13-2016 04:50 PM
Last Post: Klaus_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication