[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Configuration Yealink W52P for a GSM Gateway.
Author Message
Yea Offline
Junior Member
**

Posts: 2
Joined: May 2018
Reputation: 0
Post: #1
Configuration Yealink W52P for a GSM Gateway.
I am unable to establish a working line between the W52P and the Gateway.(This phone in its present state has a second line configured for an external VOIP service that is working fine.)
Incoming phonecalls work, outgoing phonecalls do not.
I am not using Asterisk or anything else then this gateway and the W52P and once they are configured I will disconnect WAN completely.
I want the W52P to use a mobile SIM and nothing else.
I really hope someone can help me out, because at this point I think I might have attempted all combinations brute force and I simply don't know where to go from here.



(hopefully) All relevant settings:

====================================
SETTINGS Yealink W52P
https://3macae71618368hq3ytkqe1c-wpengin...V73_27.pdf
==============================
Firmware version: 25.73.188.8
Handset version: 26.73.188.2
----
Network Settings:
IP Address: 192.168.0.132
Gateway: 192.168.0.1
Primary DNS: 192.168.0.1
Subnet Mask: 255.255.255.0
----
Account:
Register Status Register Fail
Line active = Enabled
Label, Display Name, Register Name, User Name, Password = test
Enable outbound Proxy server, NAT Traversal = Disabled
SIP Server 1:
SIP Host = 192.168.0.145:5060

Number assignement:
Headset1 is assigned for line 'test' for incoming as well as outgoing lines


====================================
SETTINGS Local Network
====================================
Router IP / internal network : 192.168.0.1 / 192.168.0.x


====================================
SETTINGS GSM Gateway: Portech MV-372
http://www.portech.com.tw/data/MV-372%20...manual.pdf
====================================
Firmware: Ver = v10.115
Network mode: Bridged
---
WAN Settings:
Master IP: 192.168.0.145
MASK: 255.255.255.0
Gateway: 192.168.0.1


Mobile to LAN Settings:
Item 0 | CID * | URL 192.168.0.132 ;Accept all numbers and transfer to 192.168.0.132
---
LAN to Mobile Settings:
Item 0 | URL * | Call Num # ;No restrictions for the incoming IP address, one stage dialing.
------
SIP Settings
Mobile 1, Realm 1:
Display Name, User Name, Register Name, Register Password = test
Domain Server = 192.168.0.145
Proxy Server = -
Outbound proxy = -
---
Ports Setting
Port of Mobile 1:
SIP Port: 5060
RTP Port 20000
(This post was last modified: 05-31-2018 11:32 AM by Yea.)
05-31-2018 11:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Configuration Yealink W52P for a GSM Gateway.
Hi,

I am afraid what you want is only possible if you use a SIP Server (PBX or VoIP trunk)
Without this the phone will never register, because the Portech is not a SIP Server.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
05-31-2018 02:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yea Offline
Junior Member
**

Posts: 2
Joined: May 2018
Reputation: 0
Post: #3
RE: Configuration Yealink W52P for a GSM Gateway.
(05-31-2018 02:16 PM)complex1 Wrote:  Hi,

I am afraid what you want is only possible if you use a SIP Server (PBX or VoIP trunk)
Without this the phone will never register, because the Portech is not a SIP Server.

Thanks a lot for your quick reply, you saved me a lot of wasted effort!
I was afraid that this might be the case, but at the same time it seemed strange to not at least have some rudimentary SIP functionality build in and the manual described some features that to me suggested it must be there somewhere.

I guess my senior parents won't be getting a new phone system after all Sad
on the up side - Guess i'll be having myself a new phone system Smile
--
(Actually, now that I think of it, I guess I could also get a RPI and use that as SIP. )

Bedankt!
(This post was last modified: 05-31-2018 02:46 PM by Yea.)
05-31-2018 02:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 514 01-22-2024 07:15 PM
Last Post: complex1
Sad W52P not picking up IP Burkni 4 4,165 09-19-2023 06:22 PM
Last Post: Burkni
  W80 Base Teams SIP Gateway Ascano 0 1,305 03-06-2023 06:12 PM
Last Post: Ascano
  W56H with W52P Base dmvcomms 7 7,410 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,806 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,654 04-20-2022 10:17 PM
Last Post: complex1
  Completely reset a Yealink W52H MartijnSanders 0 3,341 01-17-2022 07:24 PM
Last Post: MartijnSanders
  Yealink W52H and diversion ringtone honzaa 3 7,230 10-07-2021 03:51 AM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,345 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 6,950 06-01-2021 09:55 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication