BToE for CP960

[Graham25]

Can you please tell me when the CP960 will get BToE functionality. This datasheet from April 2018 says its "Pending".

http://www.yealink.com/upfiles/products/...424029.pdf

We are very keen to test this for our meeting room solutions.

Thanks,
Graham

[Rizzon]

+1
same question here

[mikhail]

+1
same question here else
when to expect?

or FIX pairing with PC (win10) via BLUETOOTH mode "Yealink Speakerphone" - disconnected after +- 3-5 min (but shows as sucsessfully connected)!!!!PLEASE!!

now only works stably " Yealink Headset" mode, but sound from this is very low quality..

BToE!! please....! implore you!
connecting to PC via USB - BAD IDEA! USB-port It is not located correctly - it will be broken very quickly, as this device cannot be nailed to the table !!!!

PLEASE FIX Bluetooth Yealink Stereo Speakerphone MODE or add the BToE for this device!!!!!!!!!

[Graham25]

(11-13-2018 03:59 PM)mikhail Wrote:  +1
same question here else
when to expect?

or FIX pairing with PC (win10) via BLUETOOTH mode "Yealink Speakerphone" - disconnected after +- 3-5 min (but shows as sucsessfully connected)!!!!PLEASE!!

now only works stably " Yealink Headset" mode, but sound from this is very low quality..

BToE!! please....! implore you!
connecting to PC via USB - BAD IDEA! USB-port It is not located correctly - it will be broken very quickly, as this device cannot be nailed to the table !!!!

PLEASE FIX Bluetooth Yealink Stereo Speakerphone MODE or add the BToE for this device!!!!!!!!!

According to the Specifications tab on this Yealink site

https://www.yealink.com/products_107.html

the CP960 Skype for Business edition now supports BToE.

The release notes found below, also state that BToE has been added as a feature for the Skype for Business edition.

http://download.support.yealink.com/down...KIKnCe6qYc