[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
secondary Message wait alert to DSS key
Author Message
Chris Barron Offline
Member
***

Posts: 50
Joined: Sep 2015
Reputation: 0
Post: #1
secondary Message wait alert to DSS key
This is a feature we;ve been asked for on a number of occasions.
A user is associated to a number of voicemail boxes and a message wait from any of them prompts the red LED. The requirement is to create a DSS key for each of the multiple mailbxes (or only the secondary ones) The DSS Led will illuminate in response to the alert and pressing the key will dial the string for the relevant mailbox.
(this part i can do, but its the alerting thats needed.)

It may be available as part of the DSS SDK capability but can;'t see how??
05-20-2018 05:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #2
RE: secondary Message wait alert to DSS key
(05-20-2018 05:45 PM)Chris Barron Wrote:  This is a feature we;ve been asked for on a number of occasions.
A user is associated to a number of voicemail boxes and a message wait from any of them prompts the red LED. The requirement is to create a DSS key for each of the multiple mailbxes (or only the secondary ones) The DSS Led will illuminate in response to the alert and pressing the key will dial the string for the relevant mailbox.
(this part i can do, but its the alerting thats needed.)

It may be available as part of the DSS SDK capability but can;'t see how??

Hi Chris
So you want to set different DSSkey to monitor different VM for the same SIP account? Right? And this DSSkey should also support EDK function?
Please correct me if any misunderstanding.

BTW, may I know how many phones do you have? How many customer request for this function?

Best Regards,
Kevin
05-30-2018 11:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris Barron Offline
Member
***

Posts: 50
Joined: Sep 2015
Reputation: 0
Post: #3
RE: secondary Message wait alert to DSS key
I think you have understood it but i will expand.
A given user has their sip account and an associated voicemail box. By default message wait from their voicemail box will illuminate the LED at the top of the phone.

However the given user also monitors a colleagues mailbox or a generic mailbox not directly associated with a human user. Typically this is the catchall mailbox for the office.

The requirement is to use a BLF key as a supplementary message wait alert from that mailbox. So A sip notify currently activates the phone MWT LED for the registered SIP account . A sip notify from the secondary mailbox would illuminate a BLF key. It would be nice if a user keypress would interrogate the given mailbox but this is not essential.

There is an alernative solution you might prefer to consider.
Although the phone has only one MWT led status on/off defaulted the mailbox associated to the SIP account. a) The phone config could be set to activate the generic MWT led on reciept of a notifiy from the secondary mailbox (technically we can already do that in the Asterisk setup by associating the secondary MWT) . But the important addition would be to present in the Visual voicemail panel on the phone, the source of the message so the user can select which voicemailbox to interrogate.

We currently have an estate of about 10k Yealink handsets at about 1000 locations. I would estimate that 50% of them would benefit from this feature
05-30-2018 12:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #4
RE: secondary Message wait alert to DSS key
(05-30-2018 12:13 PM)Chris Barron Wrote:  I think you have understood it but i will expand.
A given user has their sip account and an associated voicemail box. By default message wait from their voicemail box will illuminate the LED at the top of the phone.

However the given user also monitors a colleagues mailbox or a generic mailbox not directly associated with a human user. Typically this is the catchall mailbox for the office.

The requirement is to use a BLF key as a supplementary message wait alert from that mailbox. So A sip notify currently activates the phone MWT LED for the registered SIP account . A sip notify from the secondary mailbox would illuminate a BLF key. It would be nice if a user keypress would interrogate the given mailbox but this is not essential.

There is an alernative solution you might prefer to consider.
Although the phone has only one MWT led status on/off defaulted the mailbox associated to the SIP account. a) The phone config could be set to activate the generic MWT led on reciept of a notifiy from the secondary mailbox (technically we can already do that in the Asterisk setup by associating the secondary MWT) . But the important addition would be to present in the Visual voicemail panel on the phone, the source of the message so the user can select which voicemailbox to interrogate.

We currently have an estate of about 10k Yealink handsets at about 1000 locations. I would estimate that 50% of them would benefit from this feature

Hi Chris,

Thank you.
We will have a solution, please check if work for you or not:
1. Customer set 2 DSSkey as VM type for the same SIP account. If DSSkey 1 blink, it mean that VM account 1 has new message. DSSkey 2 can monitor colleague VM, and if DSSkey 2 blink, it means that VM account 2 has new message.
2. Then user can press those to get VM notification.
Please check if it work for customer.

BTW, can you tell me your company information? Seems that you already deploy for more 10K yealink phone, I think we already worked together to won many project.
May I know is there any new project need such feature?

If you have any other issue, I recommend you can use Yealink ticket system.

Best Regards,
Kevin
05-31-2018 03:35 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris Barron Offline
Member
***

Posts: 50
Joined: Sep 2015
Reputation: 0
Post: #5
RE: secondary Message wait alert to DSS key
Kevin,
yes we have worked on a few tickets in the forum.
Your solution as described is exactly what we need.
Company information is Telcoswitch we have a platform CallSwitch - a hosted PBX (ie each instance is a PBX) within the platform. The design and marketing philosophy is to be able to replicate any worldwide pbx functionality.
We source Yealink handsets through two UK wholesalers
How to I gain access to the Yealink Ticketing system?

Chris
06-03-2018 07:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kevin_Yealink Offline
Administrator
*******

Posts: 204
Joined: Jul 2016
Reputation: 2
Post: #6
RE: secondary Message wait alert to DSS key
(06-03-2018 07:48 AM)Chris Barron Wrote:  Kevin,
yes we have worked on a few tickets in the forum.
Your solution as described is exactly what we need.
Company information is Telcoswitch we have a platform CallSwitch - a hosted PBX (ie each instance is a PBX) within the platform. The design and marketing philosophy is to be able to replicate any worldwide pbx functionality.
We source Yealink handsets through two UK wholesalers
How to I gain access to the Yealink Ticketing system?

Chris

Hi Chris,

Thank you for your confirmation. Yes, we will develop such feature in next big firmware.

For ticket system, you can apple new account: https://ticket.yealink.com

Let us know if any issues.

Best Regards,
Kevin
06-04-2018 08:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
elementpbx Offline
Member
***

Posts: 110
Joined: Dec 2012
Reputation: 1
Post: #7
RE: secondary Message wait alert to DSS key
Having a "flashing" DSS key would be great to monitor another users mailbox. Frequent request!
08-20-2018 03:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Audio alert for call completion char1 0 1,538 08-25-2022 02:51 AM
Last Post: char1
  BLF audio alert (ring) Chris Barron 16 40,277 09-25-2018 09:49 AM
Last Post: Chris Barron
  SIP-T19P Message Waiting Flash jstorch 2 9,363 01-07-2014 12:11 AM
Last Post: jstorch

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication