[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hold Disconnecting
Author Message
Stevev Offline
Junior Member
**

Posts: 3
Joined: Mar 2018
Reputation: 0
Post: #1
Hold Disconnecting
Customer is using a combo of T4x phones in a 3 location environment. They are having an issue when a call comes into a phone and the call is put on hold, the call gets put on hold but disconnects after 15 seconds and you cant retrieve the call before it disconnects by pressing the flashing line key either. This works fine at the Main site where the internet is centralized, but the two other locations, which connect back to the Main site via MPLS, are the ones having the issue. So this seems to be an issue with the MPLS between the sites since it is only happening at those locations and the SIP traffic traverses over the MPLS to go out the internet at the main location. Placing outgoing calls on Hold works fine and all other calling functionality appears to be working fine as well. Taking the phones offsite will work. Network admin has verified that they are not blocking anything and that they do not have any SIP ALG settings enabled on the routers (ASA5510) between sites. ISP says they dont have any SIP ALG settings on their equipment(Adtran Total Access 900es and ASR9000 core).
We looked at the SIP stack and we never receive an ACK for the 200 OK (for INVITE) from the phone side that placed the call on hold. (Attaching Bad call and good call with highlighted response we are not getting from phone side.)
So at this point I am just reaching out to see if anyone has any ideas?
Is there something specific about putting a YeaLink phone on hold that would help us point to what is going on?


Attached File(s) Thumbnail(s)
       
04-03-2018 08:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Hold Disconnecting
If A receive incoming call from B.
A hold B, then A can't retrieve the call and call will disconnect after 15 seconds on A and B. Right?

Would you please apply system log with level 6\config.bin\PCAP files from phone A and B.
We can check more via these files. You will know the method via this FAQ: http://support.yealink.com/faq/faqInfo?id=707

And can I know how many phones in your side now?
04-12-2018 02:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T19 E2P Music on Hold davitelesf 1 5,517 01-30-2020 02:31 PM
Last Post: Yisroel_MongoTEL
  "Hold" + going back by "Resume" - audio is muted Babylonia 1 6,234 07-10-2019 08:25 PM
Last Post: Babylonia
  BUG - inbound hold/unhold/hangup not work via remote control for some accounts nSolvePaul 2 7,867 11-02-2018 03:10 PM
Last Post: nSolvePaul
  Retrieving "lost" call on hold Van 3 10,786 12-27-2017 12:48 PM
Last Post: Van
  BLF Auto Connects Calls on Hold Phone_Support 4 13,099 09-15-2017 01:45 AM
Last Post: Aishion_Yealink
  Hold Broken when dialing BLF Hope 1 6,513 02-13-2017 06:53 AM
Last Post: Quinlan_Yealink
  Music on hold _alx_ 1 10,656 12-17-2015 04:41 PM
Last Post: Karl_Yealink
  Music on Hold MOH mitch 2 17,588 11-03-2015 04:10 AM
Last Post: Fabrizio
  Paging start on button press and hold? igorg 3 9,818 08-05-2015 02:36 PM
Last Post: sergeysi
  Memory Keys - Disable Call Hold On BLF zachtate 2 8,900 07-03-2015 01:42 AM
Last Post: zachtate

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication