DND is not working - T46G phone rings anyway (SOLVED)

[Dirk999]

I have an Elmeg (Teledat) hybird 300 PABX. I connected my T46G with the hybird. It´works all fine except dnd.

The T46G runs on the newest 28.83.0.10 firmware. I configured dnd on the WEB UI but the phone rings anyway.

There is no "Feature key syncronisation" on the WEB GUI wich could be disabled/enabled. This was a solution here for this problem. So this solution won´t help me.

[anonymous1712222627012]

Dear Customer,

Would you please follow below FAQ to reproduce the issue by turning off and on the DND, and then making a call to it.
http://support.yealink.com/faq/faqInfo?id=707

When it is repopulated, please send me the config.bin, pcap trace, and syslog on level 6.

Kind Regards
Samuel Wang

[Dirk999]

Dear Mr. Wang,

the problem is solved. On the WEB GUI you can´t find "Feature key syncronisation".

But you find it in the configuartion file. There I set the option "0". Loaded the new configuration file to the phone an now DND works perfect!!!

Thank you for your help.

Kind regards

Dirk999