[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T22p does not get IP, and does not access the web interface even by manually config
Author Message
jason.luka Offline
Junior Member
**

Posts: 19
Joined: Jul 2013
Reputation: 0
Post: #1
T22p does not get IP, and does not access the web interface even by manually config
I'm having problems with a T22p, it can not get ip via DHCP, the screen keeps trying to get ip. but if I configure an ip manually via the device menu, I can ping the ip, but I can not access the WEB interface.
By performing the nmap on the device ip it reports that ports 80 and 443 are open.
Using Recover Mode, I can put any firmware, 7.70.0.150, 7.71.0.165, 7.72.0.80 or 7.73.0.50, even then, the problem persists.
Is there any other way to recover the device?

Regards,
Jason
03-15-2018 02:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1718628087441
Unregistered

 
Post: #2
RE: T22p does not get IP, and does not ...
Hi Jason,

Can you please try reset the phone by long pressing the OK key?

If the problem is still there after the reset, is it possible to connect this phone to a different network to see if if it can get an IP from DHCP?

Kind Regards
Samuel Wang
03-23-2018 01:54 AM
     Quote this message in a reply
jason.luka Offline
Junior Member
**

Posts: 19
Joined: Jul 2013
Reputation: 0
Post: #3
RE: T22p does not get IP, and does not ...
Factory reset has already been made by pressing OK ..
I have already used the firmware that I passed, installed via recover mode.
Placed on other DHCP, did not work.
By assigning an IP manually either on the wan or pc interface, I can perform a port scan, ping the manually assigned ip.
But I still can not access the device via web (http or https) on both network ports.

regards
Jason
03-23-2018 11:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1718628087441
Unregistered

 
Post: #4
RE: T22p does not get IP
Hi Jason,

Sorry for replying late, can you please try to disable the LLDP and CDP on the phone menu>Advanced>Network>LLDP/CDP, meanwhile, please check on the phone menu>Advanced>Network>Webserver Type>Make sure the HTTP and HTTPS are enabled, and the port number are set to 80 for HTTP and 443 for HTTPS.

Kind Regards
Samuel Wang
04-17-2018 02:31 AM
     Quote this message in a reply
jason.luka Offline
Junior Member
**

Posts: 19
Joined: Jul 2013
Reputation: 0
Post: #5
T22p does not get IP, and does not access the web interface even by manually config
Hi,

In firmware 7.70.0.140 there are no such options.
In firmware 7.72.0.80 there are no such options.
Attached follows nmap of the device setting an IP.
Is there a ROM and BIN to apply to this device for recovery?
Having already used several firmwares and got no results.
I can not access the Webserver and the device can not acquire an IP via DHCP.

Regards,
Jason


Attached File(s)
.txt  Nmap_Yealink_T22p.txt (Size: 4.67 KB / Downloads: 0)
04-17-2018 03:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
anonymous1718628087441
Unregistered

 
Post: #6
RE: T22p does not get IP,
Hi Jason,

There is no .bin file or .rfs file for T22P's recovery, to recover the T22P, you only need the rom file, which is the firmware itself.

If recovery doesn't fix it, then I believe it's hardware issue, please go to your phone provider for RMA if it is under warranty.

Kind Regards
Samuel Wang
04-18-2018 01:29 AM
     Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [Solved] Correct password don't work anymore in SIP-T22P ip phones frog.tech 1 9,848 01-27-2021 07:45 PM
Last Post: lsk
Smile Can a T29G Config.bin file be uploaded into a T23G Red Stone Telecom 0 5,132 03-29-2020 08:35 PM
Last Post: Red Stone Telecom
  You are not authorized to access the web interface message... starion 3 14,660 11-28-2019 04:05 AM
Last Post: starion
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 13,462 09-10-2019 10:47 AM
Last Post: DaveThompson
  T22P Stuck on FW 7.60.40.7 justingoldberg 0 5,278 08-16-2019 01:19 PM
Last Post: justingoldberg
  T22P DSSKey linekey labels andcza 2 11,033 05-10-2018 06:02 AM
Last Post: andcza
  T22P -0 3CX firmware web server fails preterion 1 9,634 04-17-2018 02:35 PM
Last Post: will3
  Enter SIP Server on phone interface afsfwmw90rfj 10 29,231 06-01-2017 04:55 PM
Last Post: complex1
  SIP T22P Problem liamretrams 2 11,893 06-01-2017 11:22 AM
Last Post: wcolato
  T22P push xml v61 version Qwerty 0 4,900 12-05-2016 11:02 AM
Last Post: Qwerty

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication