[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Thread Closed 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Solved] Power LED indicator in power-saving mode
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,243
Joined: Jan 2014
Reputation: 36
Post: #1
[Solved] Power LED indicator in power-saving mode
Hi,

Next parameters are not respected in v83 because indicator will NOT be off when the IP phone enters the power-saving mode:
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 100

http://download.support.yealink.com/down...V83_10.pdf
page 200

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
(This post was last modified: 04-29-2018 05:06 PM by complex1.)
03-13-2018 07:11 PM
Find all posts by this user    like0    dislike0
fire555 Offline
Junior Member
**

Posts: 7
Joined: Jun 2015
Reputation: 0
Post: #2
RE: Power LED indicator in power-saving mode
This happens just about every firmware update. Why the light flashes in power saving mode is beyond me. Please update the firmware to honour the existing power saving led settings.

It's 2 steps forward, one step back.
03-13-2018 11:58 PM
Find all posts by this user    like0    dislike0
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #3
RE: Power LED indicator in power-saving mode
Theese two parameters did work in v82.

@complex1: What do you mean now? Is the Firmware v83 buggy or is the admin manual (page 200) wrong? On page 200 there is described that it should work with "features.power_saving.power_led_flash.on_time = 0". Does it not work as described there? Or do I understand the Manual not correct?

I need flashing only on missed calls and new voice mails.
03-14-2018 02:18 AM
Find all posts by this user    like0    dislike0
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,243
Joined: Jan 2014
Reputation: 36
Post: #4
RE: Power LED indicator in power-saving mode
(03-14-2018 02:18 AM)Werner1959 Wrote:  Theese two parameters did work in v82.

@complex1: What do you mean now? Is the Firmware v83 buggy or is the admin manual (page 200) wrong? On page 200 there is described that it should work with "features.power_saving.power_led_flash.on_time = 0". Does it not work as described there? Or do I understand the Manual not correct?

I need flashing only on missed calls and new voice mails.

The manual on page 200 described these parameters how to set, so the power LED won’t flash during power-saving mode.
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time =/ 0
In v82 no problems, but in v83 these values don’t work and the power LED flashes if the phone is in power-saving mode.
Yes, I think this is a bug in v83.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
03-14-2018 09:19 AM
Find all posts by this user    like0    dislike0
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #5
RE: Power LED indicator in power-saving mode
So I hope, YEALINK will repair this soon.
03-14-2018 07:44 PM
Find all posts by this user    like0    dislike0
Who Offline
Junior Member
**

Posts: 6
Joined: Mar 2018
Reputation: 0
Post: #6
Brick RE: Power LED indicator in power-saving mode
Hi!

i can also confirm that the configuration is working with v82 but not with v83 (rolled back to v82 for the moment).

Im am also dissatisfied that Yealink is not able to fix this long term issue permanently, even not be able to put the possibility to configure this in webinterface.

Hope it get be fixed soon.

BR
wkn
03-15-2018 07:26 PM
Find all posts by this user    like0    dislike0
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #7
RE: Power LED indicator in power-saving mode
(03-13-2018 07:11 PM)complex1 Wrote:  Hi,

Next parameters are not respected in v83 because indicator will NOT be off when the IP phone enters the power-saving mode:
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 100

http://download.support.yealink.com/down...V83_10.pdf
page 200

Dear customer,

​This is Aishion from Yealink technical team, nice to know you. My pleasure to work for you!

I have confirmed it with the Product Team, it's a bug in the new V83 first version, and we will fix it in the next release.

​Any question, please feel free to contact us.

Best Regards

Aishion
03-20-2018 01:30 AM
Find all posts by this user    like0    dislike0
Werner1959 Offline
Member
***

Posts: 70
Joined: Nov 2016
Reputation: 0
Post: #8
RE: Power LED indicator in power-saving mode
Dear Aishion,

thank you for your statement. We all hope, the next interim release will be published not too far, because the senseless flashing LED is very annoyingly.

Best regards
Werner
03-20-2018 02:20 AM
Find all posts by this user    like0    dislike0
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #9
RE: Power LED indicator in power-saving mode
(03-20-2018 02:20 AM)Werner1959 Wrote:  Dear Aishion,

thank you for your statement. We all hope, the next interim release will be published not too far, because the senseless flashing LED is very annoyingly.

Best regards
Werner

Hi Werner,

We will release this firmware around next month.

Any question, please feel free to contact us.

Best Regards

Aishion
03-20-2018 02:32 AM
Find all posts by this user    like0    dislike0
khurford Offline
Junior Member
**

Posts: 2
Joined: Dec 2014
Reputation: 0
Post: #10
RE: Power LED indicator in power-saving mode
+1

This minor issue drives us and our customers insane. We continuingly get support calls from customers claiming they are unable to get their voicemail. It takes a while for us to understand that the reason why they think they have voicemail is because the Red Light is Blinking. Please, please, please do not use the red light for anything other than MWI.
03-20-2018 11:36 PM
Find all posts by this user    like0    dislike0
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [SOLVED] OpenVPN not doing anything T42G V83 Danariel 5 10,788 03-27-2020 02:32 PM
Last Post: jamesg224
  Recovery Mode Challenger VoIP 1 7,170 12-02-2019 11:14 AM
Last Post: Jacky_Yealink
  T46s : recovery mode doesn't works and phone doesn't boot Quentin-F 0 3,026 04-09-2019 08:07 AM
Last Post: Quentin-F
  Disable Power LED completely mhcsoft 6 8,894 03-02-2019 07:08 PM
Last Post: mhcsoft
  T48S used with power adapter AND POE mrfokus 3 5,453 01-08-2019 01:51 PM
Last Post: complex1
  Daylight Saving applied incorrectly Graeme Fleming 10 12,543 12-25-2018 01:33 PM
Last Post: Simons_Yealink
  T46G: Power LED always flashing when backlight is off Artabanos 125 304,286 10-15-2018 03:55 PM
Last Post: Who
  Solved - T46G - Firmware issues - 28.83.0.50 B-C 1 6,137 10-13-2018 09:33 AM
Last Post: complex1
  T46S recovery mode doesn't upload .rom file, Always "Start Updating..." andreas1984 1 6,744 08-27-2018 09:03 AM
Last Post: LOIC
  T48G Webrequest Time Outs? Solved Attila 0 2,853 07-07-2018 06:41 AM
Last Post: Attila

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication