[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EHS36 with firmware 4.16.0.0 & T38G
Author Message
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #1
Question EHS36 with firmware 4.16.0.0 & T38G
Hi there! Smile

I have the following question. Is the Yealink EHS36 (Wireless Headset Adapter) with firmware 4.16.0.0 compatible to older EOL Yealink phones like the T38G series?

I want to use a Yealink T38G (fw 38.70.1.33) with a new Yealink EHS36 in conjunction with a Plantronics CS540 wireless headset. Unfortunately it does NOT work. The cables are all 100% right connected.

Out of my view there exist most likely an incompatibility between the new EHS36 (fw 4.16.0.0) and the old T38G. The new EHS36 4.x firmware is most likely optimized for the T4x series IP phone models.

Can someone from Yealink confirm here the supposed incompatibility between a new EHS36 and an old T38G?

If this is true, can I make a downgrade from new EHS36 4.x firmware to an older one?

Kind regards
lorn10


Attached File(s) Thumbnail(s)
   
03-02-2018 07:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #2
Tongue RE: EHS36 with firmware 4.16.0.0 & T38G
*bump*

Is there any Yealink Support present or not?

It would be great to know if there exist any compatibility problems with new EHS36 4.x firmware and older Yealink phones.

Thanks
04-15-2018 04:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #3
RE: EHS36 with firmware 4.16.0.0 & T38G
Unfortunately the information practice of Yealink is catastrophic. Instead of telling me how to downgrade a EHS36 firmware they send me now a headset compatibility list. This really doesn't help anything. :-(

Is it now possible to make a downgrade of a new EHS36 to an older firmware?

It seems that any newer EHS36 models comes now with firmware 4.16.0.0 installed. Unfortunately this FW is completely incompatible with any older Yealink IP phones like the T38G models. (T38G firmware 38.70.1.33, Headset model: Plantronics CS540)

There should exist absolutely a compatibility list or compatibility matrix regarding the EHS36 firmware. That list should then define which EHS36 firmware level needs which Yealink IP phones (and firmware).

Out of mine view the EHS36 v4.16.0.0 firmware is only made for the T4x (and newer) Yealink IP phones. This would then mean that any older firmware, like the v3.16.0.0 version should be T38G compliant.

Unofficial EHS36 Compatibility Matrix (by lorn10, NOT confirmed by Yealink!):
[updated on 20.09.2018]

Firmware v4.16.0.0 --> Yealink T4x phones with V8x firmware
Firmware v3.16.0.0 --> Yealink T2x, T3x, T4x phones with V7x (V71, V72, V73) and early V8x firmware
Firmware v2.16.0.0 --> Yealink T3x phones with V70 firmware
Firmware v1.16.0.0 --> Yealink T2x or T3x phones with V6x firmware

Kind regards from Central Europe
lorn10
(This post was last modified: 09-20-2018 09:02 AM by lorn10.)
09-17-2018 02:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
lorn10 Offline
Junior Member
**

Posts: 43
Joined: Feb 2014
Reputation: 0
Post: #4
Wink RE: EHS36 with firmware 4.16.0.0 & T38G
Here follows a last little statusupdate:

After downgrading to EHS36 firmware v2.16.0.0 the Plantronics CS540 wireless headset has started to work as it should! :-D

So it is exactly as I assumed. There is definitely a compatibility problem with EHS36 firmware v4.16.0.0 in conjunction with older V7x firmware based phones.

Note, - to make a downgrade, the T38G phone has do be set to firmware 38.70.0.162. Only this specific version contains the EHS36 firmware file.

Interestingly I am now on firmware v2.16.0.0 and not v3.16.0.0. So that version seems to be the original one for the Yealink T3x IP phone series.

I have now updated the EHS36 firmware matrix in my previous post.

Kind regards from Central Europe
lorn10
(This post was last modified: 09-18-2018 01:25 PM by lorn10.)
09-18-2018 01:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  UH36 damaged after firmware update JFalke 0 1,165 01-12-2024 07:24 PM
Last Post: JFalke
  EHS36 + DW Pro2 + beep bart@wiggers.com 1 1,872 09-11-2023 09:11 PM
Last Post: Yisroel_MongoTEL
  WH66/62 firmware 125.433.0.10 no release notes? Scottie 1 3,454 11-23-2022 12:08 AM
Last Post: markvdheijden
  WH62 Bad audio after Firmware with T57W astuke 0 2,268 10-12-2022 10:12 PM
Last Post: astuke
  T48G + EHS36 + Sennheiser DW Pro - No Ring Tone miclan 1 6,699 08-25-2022 03:04 AM
Last Post: knewgent
  Firmware WH62 EHORN 3 8,833 07-07-2022 05:32 PM
Last Post: EHORN
  SIP-T29G & EHS36 Need Off-Hook Signal! Rob2001 0 2,392 04-26-2022 09:05 PM
Last Post: Rob2001
  Compatible RJ12 cable for EHS36 bnmand 3 10,510 10-29-2020 04:23 PM
Last Post: complex1
  EHS36 dead with T46G SCPCJNR 1 7,370 10-27-2020 08:08 AM
Last Post: bnmand
  Update EHS36 with T41P? SPS 2 8,360 03-24-2020 01:20 PM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication