[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T46G/S power saving mode on 66.82.0.20 firmware
Author Message
kristof.daylesford Offline
Junior Member
**

Posts: 2
Joined: Feb 2018
Reputation: 0
Post: #1
Yealink T46G/S power saving mode on 66.82.0.20 firmware
Hi,
My phones are T46G and T46S
Firmware Version 66.82.0.20
Hardware Version 66.0.0.128.0.0.0
The power saving mode is disabled by template setting
features.power_saving.enable = 0
and it works BUT after the phone is rebooted it goes to power save mode after 30 mins (i think it's the default value), screen goes black. BTW I managed to switch off the infamous power LED blink on power save.
When the display is waken up from power save by pressing any button, the phone never goes to power save again (expected)
So, only that initial restart puts phone in power saving mode.
Is it a bug? expected behaviour? anyone knows?
it wasn't like that in v81 firmware. Only appeared in v82
Please help
02-16-2018 02:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Yealink T46G/S power saving mode on 66.82.0.20 firmware
(02-16-2018 02:22 PM)kristof.daylesford Wrote:  Hi,
My phones are T46G and T46S
Firmware Version 66.82.0.20
Hardware Version 66.0.0.128.0.0.0
The power saving mode is disabled by template setting
features.power_saving.enable = 0
and it works BUT after the phone is rebooted it goes to power save mode after 30 mins (i think it's the default value), screen goes black. BTW I managed to switch off the infamous power LED blink on power save.
When the display is waken up from power save by pressing any button, the phone never goes to power save again (expected)
So, only that initial restart puts phone in power saving mode.
Is it a bug? expected behaviour? anyone knows?
it wasn't like that in v81 firmware. Only appeared in v82
Please help

Hi,

Please use 3CX SP3 and the latest template.
This template solve the power LED blink “issue” and other misconfigured settings, but not all parameters are used to provision the phone.
A few settings must be made manually. Also make sure the extension is set-up correctly in 3CX, like “Choose how to configure Power LED notifications”, “Backlight Timeout” and “Screensaver Timeout”

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
02-17-2018 10:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kristof.daylesford Offline
Junior Member
**

Posts: 2
Joined: Feb 2018
Reputation: 0
Post: #3
RE: Yealink T46G/S power saving mode on 66.82.0.20 firmware
(02-17-2018 10:15 AM)complex1 Wrote:  Hi,

Please use 3CX SP3 and the latest template.
This template solve the power LED blink “issue” and other misconfigured settings, but not all parameters are used to provision the phone.
A few settings must be made manually. Also make sure the extension is set-up correctly in 3CX, like “Choose how to configure Power LED notifications”, “Backlight Timeout” and “Screensaver Timeout”

Hope this will help.

Hi complex1,
Thank you for your reply.
Our 3CX is on the version 15.5.8801.3 and we're using the latest templates.
I discovered the setting "features.power_saving.enable" causes that behaviour. If set to 0 screen goes black after 10 min after reboot when phone is not interacted with.
If the setting is 1 - screen doesn't go black after reboot.

I wanted to phone to never go to power save mode that's why I disabled that option. I guess I'll have to leave it enabled and play with idle times and office hours settings instead.

Code:
################################################################################​#######
##                                    power_saving                                   ##          
################################################################################​#######
features.power_saving.enable = 1
features.power_saving.office_hour.idle_timeout =
features.power_saving.off_hour.idle_timeout =
features.power_saving.user_input_ext.idle_timeout=
features.power_saving.office_hour.monday =
features.power_saving.office_hour.tuesday =
features.power_saving.office_hour.wednesday =
features.power_saving.office_hour.thursday =
features.power_saving.office_hour.friday  =
features.power_saving.office_hour.saturday  =
features.power_saving.office_hour.sunday =
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 3000
phone_setting.common_power_led_enable= 0

################################################################################​#######
##                                    screensaver                                    ##          
################################################################################​#######
screensaver.wait_time= 21600
screensaver.picture_change_interval=
screensaver.clock_move_interval=
screensaver.display_clock_on_upload_picture.enable = 0
screensaver.display_clock.enable = 1
{IF ua=SIP-T29G,SIP-T46S,SIP-T46G,SIP-T48S,SIP-T48G,SIP-T52S,SIP-T54S}
{ELSE}
phone_setting.lcd_logo.wait_time= %%scrsavertime%%
phone_setting.lcd_logo.show_time= 3
{ENDIF}

BTW
the extension provisioning settings you've mentioned are as follows:
- chose how to configure power LED notifications: both (works OK)
- backlight timeout: 30 sec (overridden by template's 2mins)
- screensaver timeout: 30 sec (this gets overridden by template's 6h)
02-20-2018 02:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  newest firmware for T4XS units causes bootup loop davedogmoore@gmail.com 0 509 01-21-2024 03:44 PM
Last Post: davedogmoore@gmail.com
  Yealink T46U - OpenVPN to MikroTik Router isaiahsiewert 0 435 01-19-2024 12:04 AM
Last Post: isaiahsiewert
  Need bin and rfs files SIP-T46G RobbyK 1 732 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 967 01-11-2024 10:52 PM
Last Post: RobbyK
  Firmware T42s Raimundo 1 1,341 11-23-2023 06:45 PM
Last Post: Darsh
  Connect Yealink T46U to FreePBX system via Synology Site to Site VPN TF2023 0 751 10-10-2023 11:48 PM
Last Post: TF2023
  T46G recovery files evoip 1 1,368 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T41S FIRMWARE 66.9.0.80 vers 66.86.0.5 DANJEAN 1 1,799 08-23-2023 01:00 AM
Last Post: complex1
  Yealink SIP-T40P Firmware UnitedTech_Support 1 2,006 05-05-2023 08:07 PM
Last Post: complex1
Question Yealink SIP-T31, 46U, 48U do not display the number of the called subscr Fedor.astrakhan 1 1,774 04-26-2023 10:05 PM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication