[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T46G/S power saving mode on 66.82.0.20 firmware
Author Message
kristof.daylesford Offline
Junior Member
**

Posts: 2
Joined: Feb 2018
Reputation: 0
Post: #1
Yealink T46G/S power saving mode on 66.82.0.20 firmware
Hi,
My phones are T46G and T46S
Firmware Version 66.82.0.20
Hardware Version 66.0.0.128.0.0.0
The power saving mode is disabled by template setting
features.power_saving.enable = 0
and it works BUT after the phone is rebooted it goes to power save mode after 30 mins (i think it's the default value), screen goes black. BTW I managed to switch off the infamous power LED blink on power save.
When the display is waken up from power save by pressing any button, the phone never goes to power save again (expected)
So, only that initial restart puts phone in power saving mode.
Is it a bug? expected behaviour? anyone knows?
it wasn't like that in v81 firmware. Only appeared in v82
Please help
02-16-2018 02:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,280
Joined: Jan 2014
Reputation: 38
Post: #2
RE: Yealink T46G/S power saving mode on 66.82.0.20 firmware
(02-16-2018 02:22 PM)kristof.daylesford Wrote:  Hi,
My phones are T46G and T46S
Firmware Version 66.82.0.20
Hardware Version 66.0.0.128.0.0.0
The power saving mode is disabled by template setting
features.power_saving.enable = 0
and it works BUT after the phone is rebooted it goes to power save mode after 30 mins (i think it's the default value), screen goes black. BTW I managed to switch off the infamous power LED blink on power save.
When the display is waken up from power save by pressing any button, the phone never goes to power save again (expected)
So, only that initial restart puts phone in power saving mode.
Is it a bug? expected behaviour? anyone knows?
it wasn't like that in v81 firmware. Only appeared in v82
Please help

Hi,

Please use 3CX SP3 and the latest template.
This template solve the power LED blink “issue” and other misconfigured settings, but not all parameters are used to provision the phone.
A few settings must be made manually. Also make sure the extension is set-up correctly in 3CX, like “Choose how to configure Power LED notifications”, “Backlight Timeout” and “Screensaver Timeout”

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
02-17-2018 10:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kristof.daylesford Offline
Junior Member
**

Posts: 2
Joined: Feb 2018
Reputation: 0
Post: #3
RE: Yealink T46G/S power saving mode on 66.82.0.20 firmware
(02-17-2018 10:15 AM)complex1 Wrote:  Hi,

Please use 3CX SP3 and the latest template.
This template solve the power LED blink “issue” and other misconfigured settings, but not all parameters are used to provision the phone.
A few settings must be made manually. Also make sure the extension is set-up correctly in 3CX, like “Choose how to configure Power LED notifications”, “Backlight Timeout” and “Screensaver Timeout”

Hope this will help.

Hi complex1,
Thank you for your reply.
Our 3CX is on the version 15.5.8801.3 and we're using the latest templates.
I discovered the setting "features.power_saving.enable" causes that behaviour. If set to 0 screen goes black after 10 min after reboot when phone is not interacted with.
If the setting is 1 - screen doesn't go black after reboot.

I wanted to phone to never go to power save mode that's why I disabled that option. I guess I'll have to leave it enabled and play with idle times and office hours settings instead.

Code:
################################################################################​#######
##                                    power_saving                                   ##          
################################################################################​#######
features.power_saving.enable = 1
features.power_saving.office_hour.idle_timeout =
features.power_saving.off_hour.idle_timeout =
features.power_saving.user_input_ext.idle_timeout=
features.power_saving.office_hour.monday =
features.power_saving.office_hour.tuesday =
features.power_saving.office_hour.wednesday =
features.power_saving.office_hour.thursday =
features.power_saving.office_hour.friday  =
features.power_saving.office_hour.saturday  =
features.power_saving.office_hour.sunday =
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 3000
phone_setting.common_power_led_enable= 0

################################################################################​#######
##                                    screensaver                                    ##          
################################################################################​#######
screensaver.wait_time= 21600
screensaver.picture_change_interval=
screensaver.clock_move_interval=
screensaver.display_clock_on_upload_picture.enable = 0
screensaver.display_clock.enable = 1
{IF ua=SIP-T29G,SIP-T46S,SIP-T46G,SIP-T48S,SIP-T48G,SIP-T52S,SIP-T54S}
{ELSE}
phone_setting.lcd_logo.wait_time= %%scrsavertime%%
phone_setting.lcd_logo.show_time= 3
{ENDIF}

BTW
the extension provisioning settings you've mentioned are as follows:
- chose how to configure power LED notifications: both (works OK)
- backlight timeout: 30 sec (overridden by template's 2mins)
- screensaver timeout: 30 sec (this gets overridden by template's 6h)
02-20-2018 02:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T42G Phone stuck at Welcome LFC 12 20,400 Yesterday 04:16 PM
Last Post: markvdheijden
  T46G call completed elsewhere zimbocz 2 6,199 07-29-2022 01:49 PM
Last Post: bso
  Yealink T48S won't factory reset djcartledge 3 658 07-16-2022 05:16 PM
Last Post: complex1
  T46G - shortcut to activate/ deactivate accounts? westats 4 820 07-07-2022 11:40 AM
Last Post: westats
  Ringer Loud on Yealink T46S when using WH62 Dual Headset KellyL@AlternateAccess.com 0 271 07-07-2022 05:06 AM
Last Post: KellyL@AlternateAccess.com
  WH63 Connect to T46G 79schultz 1 465 07-06-2022 03:08 PM
Last Post: markvdheijden
  Yealink T48s Firmware update failed dangmoss 2 2,679 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 2,785 01-14-2022 10:22 AM
Last Post: kumagera
  Yealink T42S and T42G Phone stuck at Welcome Pierre06 7 4,968 01-10-2022 11:36 PM
Last Post: Pierre06
  NAP over Yealink T46 - not working Bernhard77 0 1,478 11-16-2021 09:15 PM
Last Post: Bernhard77

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication