[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink Dial Plan
Author Message
RobertCrawford Offline
Junior Member
**

Posts: 6
Joined: Jul 2017
Reputation: 0
Post: #1
Yealink Dial Plan
Our dial plan isn't taking affect on outbound calls but I can't figure out why?

I'm trying to figure out why this plan isn't affecting our outbound calls, any ideas?


Code:
dialplan.digitmap.enable=1
account.X.dialplan.digitmap.enable= 1
----
dialplan.replace.prefix.1 = (xxx)
dialplan.replace.replace.1 = 01$1
dialplan.replace.line_id.1 =
01-29-2018 03:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Yealink Dial Plan
(01-29-2018 03:33 PM)RobertCrawford Wrote:  Our dial plan isn't taking affect on outbound calls but I can't figure out why?

I'm trying to figure out why this plan isn't affecting our outbound calls, any ideas?


Code:
dialplan.digitmap.enable=1
account.X.dialplan.digitmap.enable= 1
----
dialplan.replace.prefix.1 = (xxx)
dialplan.replace.replace.1 = 01$1
dialplan.replace.line_id.1 =

Hi,

Please note: It only works if both "digitmap" parameters are set to "0"
dialplan.digitmap.enable=0
account.X.dialplan.digitmap.enable=0

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-29-2018 04:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
RobertCrawford Offline
Junior Member
**

Posts: 6
Joined: Jul 2017
Reputation: 0
Post: #3
RE: Yealink Dial Plan
The changes have been made, still a no go.
(This post was last modified: 01-29-2018 04:28 PM by RobertCrawford.)
01-29-2018 04:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #4
RE: Yealink Dial Plan
Hi,

I have just test your Dial Plan in a T48G and it works as expected.
If I dial 123 then the Dial Plan change the number and the phone dials 01123
If I dial 1234 then it passes the Dial Plan and the phone dials 1234

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-29-2018 04:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
RobertCrawford Offline
Junior Member
**

Posts: 6
Joined: Jul 2017
Reputation: 0
Post: #5
RE: Yealink Dial Plan
This is on a T46S and the Config file is coming from 3CX?
I've provisioned it with the template assigned?
01-29-2018 04:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #6
RE: Yealink Dial Plan
(01-29-2018 04:54 PM)RobertCrawford Wrote:  This is on a T46S and the Config file is coming from 3CX?
I've provisioned it with the template assigned?

OK, I have changed my 3CX template and add the dial plan you use, re-provisioning my phone and again the dial plan works as expected.
I only have a T48G, and not have the T46S… Sad for testing purposes…
The 3CX template is valid for T46S, T48G and many other T4x devices, so if it work for me it also should work for you.

The only difference is I did not change the parameters
dialplan.digitmap.enable=
account.X.dialplan.digitmap.enable=
I left them blank.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-29-2018 06:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
RobertCrawford Offline
Junior Member
**

Posts: 6
Joined: Jul 2017
Reputation: 0
Post: #7
RE: Yealink Dial Plan
I just sent them to none and reformatted the phone and still no go?

Can you check the config+ under phones and see if your dial plan is a part of the config that shows?
01-29-2018 07:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #8
RE: Yealink Dial Plan
(01-29-2018 07:03 PM)RobertCrawford Wrote:  I just sent them to none and reformatted the phone and still no go?

Can you check the config+ under phones and see if your dial plan is a part of the config that shows?

With the config+ button you only see the <mac_address>.cfg part, not the complete provision file.

BTW: After provisioning the phone, did you check in the phone if the dial rules are set-up?

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-29-2018 08:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Johnny88 Offline
Junior Member
**

Posts: 5
Joined: Dec 2016
Reputation: 0
Post: #9
RE: Yealink Dial Plan
An open dialing plan occurs when long distance phone calls and local phone calls require different arrangements. Therefore, if you are calling a number within the same city, only the number must be dialed. However, in the case where calls must be made outside the city, an area code must be dialed.

gclub คาสิโนออนไลน์

An open dialing plan occurs when long distance phone calls and local phone calls require different arrangements. Therefore, if you are calling a number within the same city, only the number must be dialed. However, in the case where calls must be made outside the city, an area code must be dialed.
03-09-2018 06:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,339 10-18-2023 12:59 PM
Last Post: sles
  Dial replace Scottie 0 891 06-11-2023 06:33 PM
Last Post: Scottie
  keypad sequence for Forward & DND with Yealink W70B Base kargah 0 1,214 04-18-2023 10:07 PM
Last Post: kargah
  Yealink T27P -Incoming call issue rsarceno 0 1,249 01-25-2023 08:54 AM
Last Post: rsarceno
  Dial Plan on W70B feedgenic 0 1,435 10-03-2022 04:58 PM
Last Post: feedgenic
  Yealink T19 can not automatically hangup inbound calls giaopc94 0 1,634 08-01-2022 09:28 AM
Last Post: giaopc94
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 11,597 03-24-2022 10:25 PM
Last Post: maindriver
  Configuring OPENVPN with Yealink Commensus 0 2,478 02-23-2022 09:45 PM
Last Post: Commensus
  Dial pause or delay jsubirana 0 3,127 12-01-2021 05:38 PM
Last Post: jsubirana
  Yealink C920 password issue DaveK 3 11,759 09-11-2020 12:02 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication